Home Styles 20 08000 0027 User manual

Hardware List
Part List
9
Tool(s) required for assembly: Phillips screwdriver, Level
A.
Cushion
1 pc.
C.
Back Panel
1 pc.
D.
Base
1 Pc.
20 08000 0027
Storage Bench
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
B.
Side Panel
2 Pcs.
E.
Plinth
2 Pcs.
F.
Plinth
2 Pcs.
M3.5x64
Wood Screw
8 pcs.(+1 extra)
Cam Lock
20 pcs. (+2 extra)
Plastic Cap
12 pcs. (+2 extra)
Dowel
20 pcs. (+2 extra)
Cam Lock Screw
20 pcs. (+1 extra)

Assembly Instructions 2/4
Cam Lock Screw
Cam Lock
STEP 1
Insert Cam Lock Screws into pre-drilled holes in
Plinths (F), then tighten.
(See Figure 1)
STEP 2
Attach Plinths (E) to Plinths (F)
with Cam Locks. (See Figure 2)
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench as the bolts may need to be tightened in the future.
Figure 1
E
E
F
F
F
F
Figure 2

Assembly Instructions 3/4
Cam Lock
Plastic Cap
Cam Lock Screw
Dowel
STEP 3
Place Base (D) upside down on a soft cloth.
Insert Dowels into pre-drilled holes in Base (D).
Attach unit to Base (D) with Wood Screws.
(See Figure 3)
STEP 4
Turn unit over to its’ upright position.
Insert Dowels and Cam Lock Screws into pre-drilled holes in Base (D).
Insert Dowels into pre-drilled holes in Back Panel (C).
Attach Side Panels (B) to Back Panel (C), then attach to unit with Cam Locks.
Attach Plastic Caps to Cam Locks. (See Figure 4)
Dowel
Wood Screw
Figure 3
Figure 4
D
C
B
B
D

Assembly Instructions 4/4
STEP 5
Place Cushion (A) upside down on a soft cloth.
Insert Cam Lock Screws into pre-drilled holes in Top (A).
STEP 6
Insert Dowels into pre-drilled holes in unit.
Attach Cushion (A) to unit with Cam Locks.
Attach Plastic Caps to Cam Locks.
A
A
Cam Lock Screw
Cam Lock
Plastic Cap
Dowel

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at: