Home Styles 88 5029 88 User manual

IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
Home Styles ConsumerAssistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Hardware List
Hex Wrench
1 Pc.
Small Hex Wrench
1 Pc. Spring Washer
9 Pcs. (+1 extra)
Flat Washer
9 Pcs. (+1 extra)
Tools required for assembly : Phillips screwdriver
88 5029 88
Bar Stool
F.
Back Frame
1 Pc.
A.
Seat
1 Pc.
D.
Stretcher
1 Pc.
E.
Stretcher
2 Pcs.
B.
Leg
1 Pc.
C.
Leg
1 Pc.
Wood Screw
6 Pcs. (+1 extra)
M6x38
Head Cap Bolt (short)
1 Pc. (+1 extra)
M6x51
Head Cap Bolt (middle)
4 Pcs. (+1 extra)
M6x70
Head Cap Bolt (long)
4 Pcs. (+1 extra)

Assembly Instructions 2
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts
in the future.
* Do not tighten up all the screws until each part is properly assembled.
* Use a soft cloth between these parts and the floor.
STEP 2
Attach Back Frame (F) to unit
with Flat Washers, Spring Washers,
Head Cap Bolt (short),
Head Cap Bolts (long) and
Wood Screws.
(See Figures 3 and 4)
Tighten up all Head Cap Bolts.
STEP 1
Place Seat (A) upside down on a soft cloth.
Attach Legs (C) to Seat (A) with Flat Washers,
Spring Washers and Head Cap Bolts (middle).
(See Figure 1)
Attach Stretcher (D) to unit with Wood Screw.
(See Figure 2)
Attach Leg (B) to unit with Flat Washers,
Spring Washers, Head Cap Bolts (middle)
and Wood Screw
Tighten Head Cap Bolts only half way.
Attach Stretchers (E) to unit with
Wood Screws.
B
C
B
B
B
F
B
E
B
E
B
D
B
A
/2
Wood Screw
Wood Screw
Flat Washer
Spring Washer
Head Cap Bolt
(middle)
Head Cap Bolt
(long)
Spring Washer
Flat Washer
Flat Washer
Spring Washer
Head Cap Bolt
(short)
Figure 1
Figure 2
Figure 3
Figure 4