Home Styles 6694-836 User manual

Part List
6694-836
Table
B.
Side
2 pcs.
C.
Side
2 pcs.
A.
Top
1 pc.
Hardware List
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460
IMPORTANT
Carefully remove all the parts from the carton and place them
individually on a soft cloth to prevent scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
This product is made of aluminum. Do not use power tools
above 8 volts to assemble and only tighten bolts until snug.
Over tightening can damage the aluminum.
Tool(s) required for assembly: Level
02
Spring Washer
16 pcs. (+1 extra)
01
Head Cap Bolt
16 pcs. (+1 extra)
03
Flat Washer
16 pcs. (+1 extra)
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.

Assembly Instructions 2/5
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 1
Turn Top (A) upside down
on a soft cloth.
Attach Side (B) to Top (A).
STEP 2
Insert 4 pcs. of , and01 02 03
into pre-drilled holes of Side (B), tightening only halfway.01
(See Figure 1)
Figure 1
B
A
01
02
03
B

Assembly Instructions /35
STEP 3
Attach Side (B) to unit.
01
02
03
STEP 4
Insert 4 pcs. of , and01 02 03
into pre-drilled holes of Side (B), tightening only halfway.01
B

Assembly Instructions 4/5
STEP 5
Attach Side (C) to unit.
STEP 6
Insert 6 pcs. of , and01 02 03
into pre-drilled holes of Side (C), tightening only halfway.01
(See Figure 2)
Figure 2
03
02
01
C

STEP 8
Turn over unit to its upright position.
Level table by adjusting the adjustable levelers on bottom of legs.
(See Figure 3)
Assembly Instructions 5/5
Figure 3
STEP 7
Attach Side (C) to unit
with 6 pcs. of , and ,01 02 03
tightening only halfway.01
Tighten all .01
03
02
01
C

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
homestyles will provide replacements free of charge for missing or damaged parts within 2 years of purchase.
Digital images of the defective parts may be required. If the product was not purchased from an authorized retailer,
homestyles is under no obligation to provide replacement parts. Parts are not available for fully assembled items nor
are parts available for sale. Replacements for missing or damaged parts may be requested via contact info below.
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460

Part List
6694-102
Chair
B.
Seat
2 pcs.
A.
Base
2 pcs.
Hardware List
02
Spring Washer
8 pcs. (+1 extra)
01
Head Cap Bolt
8 pcs. (+1 extra)
03
Flat Washer
8 pcs. (+1 extra)
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460
IMPORTANT
Carefully remove all the parts from the carton and place them
individually on a soft cloth to prevent scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
This product is made of aluminum. Do not use power tools
above 8 volts to assemble and only tighten bolts until snug.
Over tightening can damage the aluminum.
Tool(s) required for assembly: Level
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.

Assembly Instructions 2/2
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench as the bolts may need to be tightened in the future.
Figure 1
B
A
03
02
01
STEP 1
Attach Seat (B) to Base (A) with ,8 pcs. of , and ,01 02 03
tightening only halfway by using Hex Wrench.01
(See Figures 1)
Adjust Base (A) and Seat (B) look proportional, then tighten up all .01
Do the same process for another chair.

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
homestyles will provide replacements free of charge for missing or damaged parts within 2 years of purchase.
Digital images of the defective parts may be required. If the product was not purchased from an authorized retailer,
homestyles is under no obligation to provide replacement parts. Parts are not available for fully assembled items nor
are parts available for sale. Replacements for missing or damaged parts may be requested via contact info below.
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460