Home Styles 88502395 C User manual

88502395 C
Kitchen Island with
Breakfast Bar
PART LIST
B.
Side Frame L.
1 pc.
A.
Top
1 pc.
C.
Middle Frame
2 pcs.
E.
Small
Back Panel
2 pcs.
F.
Large
Back Panel
1 pc.
G.
Back Post
2 pcs.
H.
Back Stretcher
1 pc. I.
Front
Stretcher
1 pc.
J.
Bottom
1 pc. K.
Door L.
2 pcs.
L.
Door R.
2 pcs.
(For Drawer N&O Packed in separate carton
with hardware and assembly instructions.)
O.
KD. Drawer R.
1 pc.
P.
Small Shelf
2 pcs.
Q.
Large Shelf
1 pc.
R.
Gate Leg
1 pc.
S.
Handle Arms
2 pcs.
T.
Round Arm
1 pc.
U.
Knife Box
1 pc.
HARDWARE LIST
Caster
with and
without brake
4 pcs.
Head Cap Bolt
13 pcs. (+1Extra)
Hex Wrench
1 pc.
Cam Lock Screw
6 pcs. (+1Extra) Pull Handle
4 pcs.
Cam Lock
6 pcs. (+1Extra)
Machine Screw
for Pull Handle
8 pcs.
Wood Screw
20 pcs. (+2 Extra)
Adjustable Pin
12 pcs. (+2Extra)
D.
Side Frame R.
1 pc.
M.
Drawer
Divider.
1 pc. N.
KD. Drawer L.
1 pc.
Wood Plug
6 pcs.
(+2 Extra)
Thank you for purchasing our quality products.
Please carefully check the quantity of the parts
and hardware. Please also read this assembly
instructions until you understand clearly how to
put the parts together then start assembling
step by step. Casual Attire For Today's Home
Thai Patent Pending Numbers 074801

Assembly Instructions 2/3
STEP 1
STEP 2
STEP 3
Tighten Head
Cap Bolt by
Hex Wrench.
B
D
H
EE
J
M
F
S
S
T
IJ
J
G
C
C
G
D
Attach 4 Casters to the under side of the
Bottom (J), put the 2 Casters with
brakes in front as you first need to lock
the cart from moving.(See sticker in the
bottom indicating front side)
Slide the Back Panels (E),(F) in places.
Place the Back Stretcher (H) on Back
Panels(E),(F) insert the Head Cap Bolts
through the Side Frame (D), then tighten
them only half way.
Place the Front Stretcher(I) in front,
then tighten all Head Cap Bolt half way.
Attach the Drawer Divider(M) to the Back
Stretcher(H) and Front Stretcher(I). Tighten
Head Cap Bolt.Attach the Side Frame (B) to the left
side of the assembled body. Retighten all Head Cap Bolts.
Attach the Handle Arms (S) using Head Cap Bolts
from the inside and slide the Round Arm (T) in place.
Attach the Side Frame (D) to the
Bottom (J). Tighten Head Cap Bolt
only half way. Place the Back Posts (G)
on the Bottom rear. Attach the Middle Frame(C)
with the Back Posts (G).
IMPORTANT
Do not tighten up all the screws until each part is properly assembled.
You should keep Hex Wrench in the safe place as you may need to
tighten up the Head Cap Bolts in the future.

STEP 5
STEP 4
STEP 6
Door Assembly
using Spring Pin Hinge
Put the Adjustable Pins into the side panel,
in the desired position. Place Shelf (P),(Q).
Slide the Drawer(N) and Drawer(O) in places.
Place the Gate leg (R) on the rear
and hold on back frame with Wood Screws.
Pull Handle
Assembly
Assembly Instructions 3/3
A
D
B
U
KKLL
P
P
Q
NO
J
Attach the Knife Box (U) to the Side Frame (B)
with the Head Cap Bolts.
Place the Cam Lock Screws into the Top holes,
then place the Top(A) on the assembled body.
Place the Cam Locks into the holes of the
Side Frames (B) and (D), Make sure the Arrow sing
on top. and tighten all the Cam Locks as to secure
the Top with the body.
Attach the Doors (K),(L) to the Front Stretcher (I)
and Bottom (J) using Spring Pin Hinge.
Assemble the Door and Drawer Pull Handles
using the Machine Screws.
Cam Lock
Assembly
Holding Gate Leg
and rear frame
with Wood Screw
See the “Arrow”
on top
STEP 7
Cover all holes with
Wood Plugs

88502395 C
Drawer (N)
Drawer (O)
Assembly Instructions
Unit Part List
N1,O1.
Front Part
1 piece for each
drawer.
N5,O5.
Bottom Part
1 piece for each
drawer.
N2,O2.
Back Part
1 piece for each
drawer.
O2
O2
N2
N2
O5
O5
N5
N5
O3
O4
O4
N3
N4
N4
O4
O3
O3
N4
N3
N3
O1
O1
O1
N1
N1
N1
(Fig) 2
(Fig) 3
(Fig) 4
Assemble the Pull Handle
with Machine Screw on
the Front Part(N1,O1).
(Fig)1
(Fig)2
(Fig)3 (Fig)4
Turn the assembled drawer over and slide the
Plywood Bottom Part (N5,O5) into the grooves
on Side Parts (N3,O3)and(N4,O4). Be sure to push
the plywood all the way forward so it meets the
Front Part (N1,O1).
HARDWARE LIST
Pull Handle
2 pieces.
Machine Screw
for Pull Handle
4 pieces.
1
Wood Screw /”
2
(for Bottom Part)
12 pieces.
Wood Screw 1”
(for Side Part)
16 pieces.
O1
N1
O2 N2
O3
N3
O5 N5
O4
N4
(Fig) 1
Line up Side Parts (N3,O3)and(N4,O4)to the
Front Part (N1,O1) and Back Part (N2,O2). Be
sure to follow the ‘Arrow’ sign sticker on the parts.
Using a Phillip’s screw driver, insert 1” screws
into each of the 4 pre-drilled holes in sides
(N3,O3)and(N4,O4), then tighten half way.
Insert the remaining (6) 1/2” screws
into the pre-drilled holes in Bottom Part
(N5,O5), then tighten all screws
MAKE SURE ROLLER
IS ON THE BACK
N3,O3.
Side Part(L.)
1 piece for each
drawer.
N4,O4.
Side Part(R.)
1 piece for each
drawer.
* If you are missing any of these
parts, please contact our DMI
Customer Service Department
at 1-877-831-0319 or fax us at
1-800-755-2878.