Hongda USA Cheryl's Room M020 User manual

M020 Instruction manual

Notes before assembling
The product is not suitable for children
under 14 years old. The should be under
custody of adults when playing with the
product.
There are small parts, please do not swallow
them for avoiding dangerous accidents.
Please also play attention to the sharp-
pointed materials to avoid injuries.
Warnings
Making tips
1. LED wiring indication:
White=Positive;Grey=Negative.
2.Use a craft blade to carefully
skim over the plastic to bare the
copper wire.
3. For LED wiring extension,
please refer to the below steps:
Place the duly twist
wire on the tapes
provided.
Roll and wrap the wire. Roll and wrap it together.
Tips for assembling
Use the provide battery
holder. Make sue the correct
polarity.
How to assemble the battery holder
2. Use screw driver and
take the lid off from the
battery holder.
3. Insert the battery take
notes on the polarity.
4. Connect the red wire to
grey wire. Connect the black
wire to white wire.
5.Wrap the exposed wire
with the tapes.
6. Place the box lid and
fastness with screw driver.
LED
wire
Extension
wire
“+”positive
“-”negative
LED
wire

Product Introduction
Glass
bottle
Potted
plant
Cup
Sheliving
Books
Vase
Fruit
Frame
Little
clock
Little
flag Pillows Little
lamp
Bed
Gift box
Bag
Slippers
Postcard
Photo (Night)

Material List (Unit:cm)
Material Bag
A
A07 Paper printing
4pieces
Material Bag
B
Material Bag
C
C01 Plaids(pink)
7*11 (1piece)
C02 Cloth(blue)
7*11 (1piece)
C03 Lace (white)
long=14 (1piece) C04 Floral cloth(white)
6*6 (1piece)
C05 Floral cloth(pink)
6*6 (1piece)

(Unit:cm)
Material List
C09 Iron wire(black)
long=14 (1piece) C10 Plastic bead(black)
1piece
C11 Rubber hose(transparent)
long=2 (1piece)
C06 Cloth (blue)
3*6 (1piece) C07 Cotton (white)
some
C08 Rope(creamy-white)
long=13 (1piece)
C12 Rubber hose(transparent)
long=2 (1piece)
C16 Dried flower(green)
some
C17 Flower power (pink)
Some
C23 Dried flower(pink)
some
C22 Ribbon (purple)
long=10 (1piece)
C21 Cardboard (white)
5*6 (1piece)
C20 Plastic bead(black)
3pieces
C20 Plastic bead(light green)
2pieces
C18 Plastic bead(pink)
1piece
C24 Rubber hose(transparent)
long=2 (1piece)
C25 Plastic bead(red)
8pieces
C26 Battery box(black)
1piece
C27 Screw (black)
1piece C28 LED bulb with wire
3pieces
C30 Sand paper
1piece

Bed
Part 1 Part 2
Part 2
Part 1
Part 2
Part 2
1.Attach B05 on B02 to make
part 1 as shown. 2.Attach B04 on B01 to make
two pieces of part 2 as shown.
6.Cut out a piece of C03(7cm)
and paste it on mattress as shown.
7.Repeat above same steps to make
another mattress as shown.
mattress pillow
Pillow
8.Cut out a piece of C05
(2.5*5cm) as shown.
9. Put some cotton C07 on C05, apply
the glue according to the red lines as shown.
10. Fix it as shown, the
pillow is done.
(pillow)
11. Repeat above same
steps to another 5pieces
of pillow as shown.
12. Paste mattress and
pillows to the bed form
as shown.

Shelving
1.Attach two pieces of B07 to
B08 as shown.
2.Paste B06 to the
combination as shown.
4. Paste above part into the combination as shown. 5.Attach B11 to combination as shown.
6.Paste C22 on two boxes as shown.
(box)
(box)

8.Cut C16 into small pieces and insert
it in C15 as shown.
(4pieces)
(4pieces)
(3pieces)
(the book is on bed)

Wall deco
4. Paste the small parts on B15
as shown.
Table
(fold it)
4.Paste C16 and C25 on C24
as shown.
Slippers

Bag
Wall deco
Wall lamp
2. Fold it and paste it as shown.
3.Cut out a piece of C09 and bend it according
to above diagram as shown.
4.Insert C09 to the hold
of C10 as shown. 5.Paste C28 on C09 as shown.
Little lamp
1.Cut out a piece of C09(7.3cm) and bend it
as shown.

Installation of dust proof cover
Photo of Dust proof cover
Outer frame
According to below steps to make
A01,A02,A03, and fix it according
above diagram to make the outer frame
as shown.
Little flag
Lamp wiring
installation drawing
Little lamp
C28
2.Attach the little lamp on the bed as shown.
the power wire of little lamp along the edge
of bed, through the hole on the wall as shown.