Hongda USA PC902 User manual

DIY mini house kits - DIY mini house kits -
Initial D Initial D
DIY mini house kits -
Initial D
PC902 Instruction manualPC902 Instruction manualPC902 Instruction manual
PC902
PC902
PC902

1
1 2 3 2 45 6 7 1
Be sure to test the LED lights before making the lighting,
note that the LED white wire to the negative, gray wire
to the positive reference to the following figure
operation test.
1 2
Tips for assembling
Testing on LED function
DO NOT contact the
LED wire end direct
to the battery cell.
Use the provide battery
holder. Make sue the
correct polarity.
1.Picures shown on the package may be slightly different from the actual product.
2.All the materials are taken in the operation step, put the remaining materials back into
the original pocket until the installation is completed.(Avoid material loss during installation)
3.The dimensions indicated in the step diagram are“cm”.
4.If there have template paper material, please cut the material according to the template
to avoid mistakes..
5.According to the part rule example at the bottom of this page, refer to the part on the part
number drawing, find the material object and compare with the material list, confirm and
install.(Wooden parts only)
6.Glue should not be applied too much, so as not to dry longer, overflow will affect the effect
of the finished product.
7..Part shapes may differ from the photographs depending on he production batch
Product comes with tool:
Scissors:
Can be used to
cut printed
paper,cloth,etc.
Tweezers:
For holding small
materials and
rolling up iron
wire.
Cutter kinfe:
For peeling off power
wire skin and cutting
off materials.
Ruler:
For measuring
materials to identify
the number of
materials so as to
enhance
work efficiency.
White glue:
It dries slowly and
can paste materials
firmly without trace.
Can be used to paste
wallpaper and
printed paper.
Alcohol gel:
It dries fast and can paste
materials firmly,but may
leave some trace. Can
be used to paste small
metal materials and
small components of
furniture.
Needle-nose pliers:
For cutting, bending wire,
folding harder material
Drill:
Can be used to
drill holes in timbers,
roll up hard iron
wire or fix screws.
Screw Driver:
For fixing screws,
mostly can be used
to install doors and
music components.
Bring your own tools:
How to assemble the battery holder
1.Material and tools needed:
- Battery holder, LED bulb,
tape, screw driver and 2 piece
AAA size battery(not provided)
2. Use screw driver and
take the lid off from the
battery holder.
3. Insert the battery take
notes on the polarity.
4. Connect the red wire to
grey wire. Connect the black
wire to white wire.
5.Wrap the exposed wire
with the tapes.
6. Place the box lid and
fastness with screw driver.
“-”negative
“+”positive
Example of parts rule:
A01:The parts are directly in the box.;B01:parts in bag B;C01:part in bag C,and so on.
(Note: display the printing paper A24-01 in the step: the printing paper is placed directly in the box, part number is A24-01)

2
clock F bag +printing paper
screen
ladder
F bag
wall deco
fire hydrant
projector F bag+N bag
G bag
shelf G bag
tire rack G bag
long chair
G bag+M bag
clogs
G bag+N bag+P bag+printing paper
TV cabinet
H bag
H bag+N bag+ printing paper
H bag+P bag+printing paper
umbrella
H bag+printing paper
H bag+printing paper
H bag+N bag
J bag+printing paper
J bag+M bag+N bag+printing paper
K bag+M bag+printing paper
K bag+M bag+N bag+printing paper
L bag+M bag+P bag
L bag+M bag+P bag
N bag+P bag
P bag+printing paper
M bag+N bag+P bag
D bag
N bag+P bag
D bag
A bag+E bag+N bag+printing paper
N bag+P bag+ printing paper
D bag+M bag+P bag
E bag
A bag+B bag+C bag+D bag+E bag+F bag+G bag
+H bag+J bag+K bag+L bag+M bag+N bag+P bag
+printing paper
C bag
D bag+P bag+Q bag
E bag
E bag+printing paper
E bag+P bag+printing paper
A bag+E bag
N bag+P bag+printing paper
K bag+M bag+N bag+printing paper
washing table
Thumbnail of material list( reference only)
Thumbnail of printing paper &template paper( reference only)
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
1
Symbol description used
Install parts
in the opposite
direction
Install the same
parts on both
sides
Pay attention to the direction of installation material B
stick to material A
Pay attention to the direction of installation material A
stick to material B
Fold in half
according
to dotted lin
fold double edge
to center dotted
line
Fold four sides
to the middle
1
123
combination part
according so on.
Welcome to the little DIY
world, now come with me！
details of minature kit
Name Material package
Bag A-A24(All printing and template papers are
shown on A24 paper, total 3pieces of A3 and
1piece of A4 )
Printing paper
crap flags
double tatami
table
tatami bed
rocking chair
round table
tatami table
for four
wardrobe
wall
indoor flower
single bed
antenna
elevator
tofu box
cabinet
battery holder
cherry blossom
tree
doll
wind bell
sunshade
sign board
interior stairs
shower
bridge
hot spring
outer frame
outdoor stair
round lamp
umbrella light
screen
tofu box
telegraph pole
F bag +printing paper
F bag +printing paper
F bag +printing paper
J bag+M bag+N bag+printing paper
A bag+M bag+P bag+printing paper

F01
A
B
(make 4 pieces)
F01
A24-55 A24-55
F11
F10
F09
F08 F07
F06
F10
F11
F09
F08
F07
F06
F12
F13
A25-49 A25-49
F13
F12
F15 F15
F14
F14
F15
F15
F16
F17 F18
N08
F16
F17
F18
N08
G01 G02 G02
G03
G03
G03
G02
G03
G02
G01
G04 G05 G05
G06
G07 G08 G05
G04
G05
G07
G06
G08
G09 G09
G10
G10
G10
G10
G10
G09
G10
G10
G10
G09
G06
G06
G07 G07
3
Clock
Wall deco
Screen
Fire Hydrant
Ladder Projector
Long chair
Shelf
Tire Rack
A24-50-1 A24-50-2
A24-50-3
A24-50-4
A24-50-5
A24-50-6
A24-50-1
A24-50-2
A24-50-3
A24-50-4
A24-50-5
A24-50-6
F02
F03
F04
F05
F03
F05
F02
F03
F04
F05
F03
F05

4
A
B
G11 G11 G11 G11
G11 G11 G11 G11
G12
G12
M10(rope belt)4pieces
M09
(rope belt)4pieces G12:0.7cm
(16pieces)
G12
G11
G12
M09(rope belt)
(make 4pieces)
M10
(rope belt)
4pieces
G11(4pieces)
G12(8pieces)
P03:3cm(6pieces)
G13
G14
G15 G15
G15
G14
G15
G13
N10
P08
N10
P08
H01
H01
H02
H04
H03
H02
H04
H01
H01
H03
H05
H06
N06
N09
N07
N06
H05
N07
N09 P03
H06
H07 H07 H07
H08 H08 H08
H07
H08
(需要3个)
A24-57
A24-57
A24-35-1A24-35-2
A24-35-2
A24-35-1
A24-28-1
A24-28-2
A24-28-3
A24-28-4
A24-28-5
A24-28-6
A24-28-1
A24-28-2
A24-28-3
A24-28-4
A24-28-5
A24-28-6
A24-41 A24-39
A24-41
Clogs
Cut out the material M09 and M10 according to the template paper before making.
TV cabinet
Antenna
Umbrella
Crap Flags
Tofu box

5
(make 2pieces)
A
B
(As shown in the figure, two of the boxes
need to be stuffed with A24-39.)
H09
H10
H11
H11
H12
H13
H12
H10
H11
H11
H12
H12 H09 H13
H14
H15
H15
H16
H16
H17
H18
H19
H14
H19 H18
H17
H15
H15
H16
H16
N02(5pieces)
N02
(5pieces)
J01 J02
J05
J04
J03
J01
J01
J04
J05
J03
J03
J02
(make 2pieces)
G06
G07
M01
(cushion)
M01
(cushion)
M08
(cushion)
M08
(cushion)
M15
(cushion)
M15
(cushion)
M12
(tea)
J06 J07 J07
J08
N05
N05
N04
M12(tea)
J06
J07
J07
N04
J08
N05
N05
M15(cushion)
M08(cushion)
A24-39 A24-40 A24-40
A24-40
A24-19
A24-20
A24-20
A24-19
A24-31
Telegraph pole
Elevator
J02
J05
J04
J03
J03
J03
Double Tatami Table
Cut out the material M01,M08,M12 and M15 according to
the template paper before making.
Tofu box

6
(make 2pieces) (make 2pieces)
(make 2pieces)
(make 2pieces)
M01(cushion)M03(back chair cushion)2pieces
M08(back chair cushion)2pieces
M15(back chair cushion)2pieces
M01(cushion)4pieces
M08(cushion)4pieces
M15(cushion)4pieces
J09
J10
J11
J12
J15
J14
J13
N01
N01
M16(wash basin)
P05
P04
J10
J12
J11
M16(wash basin)
J09
0.8cm
0.5cm
P04:1.3cm
J15
0.3cm
0.2cm 0.2cm
P05:0.7cm
J13
J14
A21
M08(bed
cushion 1)
M01
( bed cushion1)M03
(quilt1)
M02(bed pillow)
P07
M15(bed
cushion 1)
M08(bed cushion1)
M15(bed cushion1)M01(bed cushion 1)
M03(quilt 1)
0.8cm
As shown in the figure, fold outward by 0.8cm.
M02(bed pillow)
As shown in the figure, apply glue to the red line of M02 (pillow on the bed), fold and paste it in half, insert P07 and seal it.
P07
M02(pillow)2pieces
P07
A21
A24-31
A24-58
A24-46
A24-54
A24-46
A24-58
A24-54
A24-36-1
A24-36-2
A24-36-1A24-36-2
A24-30
A24-30
Cabinet
Cut out the material M16 according to
the template paper before making.
Single bed
Cut out the material M01,M02,M03 and M04 according to
the template paper before making.

7
(make 2pieces)
K05
K06
K07
K03
K02 K04 P07
M08
(bed
cushion2)
M01(bed
cushion 2)
M03
(quilt 2)
M02
(bed pillow)
M15(bed
cushion 2)K02 K03
K01
K01
K02
K04
K06
K05
K06
M15(bed cushion 2)
M08(bed cushion 2)
M01(bed cushion 2)
M03(quilt 2)
0.7cm
As shown in the figure, fold inward by 0.7cm.
K08
K09(4pieces)
K12
K10 K10
K11
K11
M10
(sashimi)
M08
(rice)4pieces
M13
(egg)
M18
(nori roll)
N12
N06
N06
N13
M03
(back chair
cushion)
M03
(back chair
cushion)
M08
(back chair
cushion)
M08
(rice)
M08
(rice)
M08(rice)2pieces
M10(sashimi)2pieces
M18(nori roll)
M13(egg)
K08
K09
K09
K09
K09
N12
N13
N06
N06
K10
K11
K12
A24-59
A24-24
A24-56
A24-43
A24-24
A24-33
A24-33
A24-56
A24-43
A24-59
A24-48
A24-48
K07
Tatami bed
Cut out the material M01,M02,M03,M08 and M15 according to the template paper before making.
Round table
Cut out the material M03,M08,M10,M13,M15 and M18 according to the template paper before making.
M08
(back chair
cushion)
M15
(back chair
cushion)
M15
(back chair
cushion)
Tatami table for four

8
L08 L09 L09 L10 L14 L12
L13
L11
L11
L15 P05
M08
(folding
towel)
M10
(collar)
K13 K16
K14
K14
K15
K15
M10
(sashimi)
M08
( )nori roll M18
( )nori roll
M08
(rice)2pieces
M11
(sushi filling)
2pieces
M12
(sushi filling)
2pieces
M13
(sus hi fillin g)
2pi eces
N06
N11
N07
M01
(cushion)
M08
(cushion)
M15
(cushion)K15
K14
K15 K14
K13
K16
M08(nori roll)
M13(sushi filling)2pieces
M11(sushi filling)2pieces
M12(sushi filling)2pieces M18(nori roll)
N11
N06
M02
(pillow)
M02
(pillow)
P07
L02
L01 L01
L04
L03
L07 L07 L05 L06
P03
M07(sunshade)
L07
L07
L05
L06
L01
L01
L03
L04
L04
P03:6.2cm(2pieces)
0.5cm
2.4cm
2.8cm
M07(sunshade)L02
M09
(collar)
M11
(collar)
L08
L09
L13
L15
0.3cm
0.3cm
L10
L11
L12
L11
L09
A24-22
A24-22
A24-32
A24-32
N07
N07
N07
N07
Cut out the material M01,M08,M10,M11,M12,M13,M15
and M18 according to the template paper before making.
M01
(cushion)
M01
(cushion)
M01
(cushion)
M15
(cushion)
M15
(cushion)
M15
(cushion)
M08
(cushion)
M08
(cushion)
M08
(cushion)
N07
N07
N07
Rocking chair
Cut out the material M02 and M07 according to the template paper before making.
L04
Wardrobe
Cut out the material M04,M05,M06,M08,M09,M10 and M11 according to the template paper before making.
M05
(right slice
of bathrobe)
M05
(left slice
of bathrobe)
M05
(back slice
of bathrobe)
M06
(right slice
of bathrobe)
M06
(left slice
of bathrobe)
M06
(back slice
of bathrobe)
M04
(right slice
of bathrobe)
M04
(left slice
of bathrobe)
M04
(back slice
of bathrobe)

9
(need three)
P11
P11
P02
P06
P02:25cm(2pieces)
P11
P06
A24-45
(6pieces)
P03:2.5cm
N04
(晴天娃娃)
M17
(doll)
P03:5cm
1.5cm
0.5cm
N15
N16
P13
(need 2 pieces)(need 2pieces)
P01
N09
A24-38
P05:0.4cm(2pieces)
L14
P05:2.6cm(3pieces)
1cm
0.5cm
0.2cm 0.2cm
0.2cm
P10
P09 N18
N18
P10
P09
A24-45
(6pieces)
P03
N03
M17
(doll)
N03
P03
N03
A24-51
N03
A24-51
P13
N16
N15
N16
N15
P13 N15
P01
N15
P13
P13
A24-38
M04
(left slice
of bathrobe)
M04
(right slice
of bathrobe)
M04
(back slice
of bathrobe)
M09
(collar)
M10(collar)
M06(left slice of bathrobe)
M06(right slice of bathrobe)
M06(back slice of bathrobe)
M08
(folding
towel)
Indoor flower
Cherry Blossom Tree
(Need 2pieces, one of which needs to be affixed with A24-45)
Doll
Cut out the material M17 according to the template paper before making.
(PS:Hole N03 should be facing up
so that P03 can be inserted later.)
(Finally, with the pen DIY
expression on the completion of it!)
Wind Bell
Round Lamp
Umbrella Light