Hongda USA The Sound of the Sea M040 User manual

M040 Instruction manualM040 Instruction manualM040 Instruction manual
M040
M040
M040
DIY handmade DIY handmade
goods-- goods--
The Sound of the Sea The Sound of the Sea
DIY handmade
goods--
The Sound of the Sea

1
Making tips
1. LED wiring indication:
White=Positive;Grey=Negative.
2.Use a craft blade to carefully
skim over the plastic to bare the
copper wire.
3. For LED wiring extension,
please refer to the below steps:
Twist the copper of
both LED wire and
extension wire
together.
Do the same on the
white wire.
Remarks: Tie a knot
at the end of the grey
wire to differentiate
the polarity.
Place the duly twist
wire on the tapes
provided.
Roll and wrap the
wire.
Place another wire
next to it.
Remarks: DO NOT
contact both copper
wire to avoid short
circuit.
Roll and wrap it together.
Warnings
The product is not suitable for children
under 14 years old. The should be under
custody of adults when playing with the
product.
There are small parts, please do not swallow
them for avoiding dangerous accidents.
Tips for assembling
1.Picures shown on the package may
be slightly different from the actual
product.
2.Please use the provided tracing
paper for cutting purpose to achieve
the best
outcome.
3.Product designs and specification
may be subject to change without
advance notice for purpose of
making improvement.
4.Testing on LED function:
DO NOT contact the
LED wire end direct
to the battery cell.
Use the provide battery
holder. Make sue the
correct polarity.
LED
wire
LED
wire
Extension
wire
How to assemble the battery holder
1.Material and tools needed:
- Battery holder, LED bulb,
tape, screw driver and 2 piece
AAA size battery(not provided)
2. Use screw driver and
take the lid off from the
battery holder.
3. Insert the battery take
notes on the polarity.
4. Connect the red wire to
grey wire. Connect the black
wire to white wire.
5.Wrap the exposed wire
with the tapes. 6. Place the box lid and
fastness with screw driver.
“-”negative
“+”positive

2
Life ring
bedside lamp
Floor lamp
Swimming
pool
Potted plant
Piano
Sofa Beach chair Bed Flower
Table
TV console
Product information

3
A09-37
B15
B13
B14 B14
B13
B13 A09-37
C01
C02 F10
A09-18
F10
C02
A09-18
C01
A09-07
E11
(photo frame
support)
E11
(A09-07)
0.3cm
C03
C04
C03
C04 C04
F04
F08(3pieces)
F04
F08 F05
F01:1.5cm
F09
F09
F05
0.5cm
F01:1.5cm
C05
C07
C06(2pieces)
C08(3pieces)
E01(sofa base)
E01(sofa backrest)
E04
(sofa pillow) C07
E01(sofa backrest)
E01(sofa handrail)2pieces
E08
A09-07
E11
(A09-07)
E07
(sofa cushion)
3pieces
E02
(sofa cushion)
3pieces
E03
(sofa pillow)
2pieces
Cut E11 according to the template of E11.
B15
(back view)
(front view)
TV console
B13
TV
C04
Table
Photo
E11
(photo frame
support)
Fruit disc
Cup
Sofa
Cut out the material E01,E02,
E03,E04 according to the template
paper before making.

4
H01
C05
E01(Sofa base)
H02
C06
E01(sofa handrail)
H03
(2pieces)
E07
(sofa cushion)
C08
E02
(sofa cushion)
H04
(3pieces)
H01
H02
H03
H03
H04
H04
H04
E03
(sofa pillow)
E08
E04
(sofa pillow)
E02
(quilt)
E07
(bed cushion)
E04(bed pillow)
E03(bed pillow)
A09-12
C12(2pieces)
C12
C12
A09-12
A09-03
A09-03
C13
C13
fold in half as shown
after leaving 1cm and
fold up again as shown.
A09-11
C14
C16
C15(2pieces)
C14
A09-11 C15
C15
C16
E08
1cm
Making method
of pillow reference
sofa pillow.
bed
Cut out the material E02,E03,
E04,E07 according to the template
paper before making.
E07
(bed cushion)
E02
(quilt)
E03
(bed pillow)
E04
(bed pillow)
Bedside table

5
D05
D10
D12
D08
D07 F03:1.5cm
A09-06
D05
D09
D08
A09-06
D07
D06
A09-19
A09-19 D12
D11
D11
D11
F03:1.5cm D10
D13
D14(2pieces)
E07
(piano stool
cushion)
D13
D14
D14
F03:1cm
(4pieces)
B06(2pieces)
E05
(beach
chair) F03:1cm F03:1cm
F03:1cm
B06 B06
C09(3块)
E14:8cm
twist E14 in two pieces as shown.(2pieces)
C09
E13:2.2cm
A09-35
E13:2.2cm
(12pieces)
E05
(beach chair)
E14:8cm
D06 D09
D11(3pieces)
Piano Piano stool
Cut out the material E01,E07,according to the template
paper before making. E01
(piano stool
cushion)
E07
(piano stool
cushion)
Cut out the material E05 according to the template
paper before making.
Beach chair
E01
(piano stool
cushion)
Book
Life ring

6
E13:2.2cm
(2pieces)
E13:2.2cm E13:2.2cm
H05 H05
H06
(Making method of H06 is
same as H05, remove E14.)
A09-26 A09-27
A09-20
A09-21
B05
A09-26
B05
A09-27
A09-20
A09-21
A09-30-1
A09-30-2
A09-30-3
E09
(rose)3piece
F02: (2pieces)2cm
F02:
2.5cm
F14(1 branch)
Fold in half
as shown.
(3pieces)
F02:2cm
F02:2cm
F02:2.5cm
A09-30-1
A09-30-2 A09-30-3
A09-30-3
cut out as shown
(front view)
(back view)
E09
(rose)
Swimming
pool
Rose
Cut out the material E09 according to the template
paper before making.
F14(1 branch)

7
F07
F14(1 branch)
F07
F14 A09-04-2 A09-04-1
A09-04-3
A09-04-1 A09-04-3 F15
B08(4pieces)
B12
B11
B10
B09B07
B07
F15
E12
B08
(4pieces)
B09 B10
B11
B12
F15
F11:0.6cm
F06
F12
F15
F12
F06
H07
H08 H09
F15
F15
D01
D02
D03
D01
D02
D03
B02
B03
B04 B02
B03
B04
H10
C10(2pieces) C11(3pieces)
C11
C10
H11
H12
F13
F13
E12(floor lamp)
4pieces
F11:0.6cm
B07
B02
B03 B04
B02
E07(slipper)
E07(slipper)
A09-04-2
Potted plant
Cut out the material E07 according to the template paper before making.
Slipper
Cut out the material E12 according to
the template paper before making.
Floor lamp
Wall lamp
Bedside lamp
Pool fence
Second floor
fence

8
D04 A09-05
B01
A09-05
H13
E11
(window 2)
E11
(window 1)
E12
(window)
E11
(window 2)
E11
(window 1)
H14
E06(curtain)
H14
A01
A09-01
A02
A09-25
H15
H16
H16
H15
A09-22
E12
(window)
E11
(window1)2pieces
0.8cm 0.5cm 0.8cm 0.5cm
A03
G01 G02
G02G02
G03
Following above steps to make the curtion as shown.
H15
H16
Second floor
stairs
French window
Cut out the material E11 and E12 according
to the template paper before making.
Curtain
Cut out the material E06 according
to the template paper before making.
fold foldfold fold
Music machine core manual guide
(If you have purchased the music machine
core, please fix it firstly)
G01 Music
machine core
1piece
G03
Music machine
core handle
1piece
G02 Screw
3pieces
(Front view)
(back view)
Outer frame

9
A09-29
H08
A09-23 A09-24
B01
B01
B01
B01
A09-16
A09-02
A04
A05
A06
(front view) (back view)
(front view) (back view)
A05
A06
Attach A09-29 on A04, cut a small opening on A04 with
a knife according to he instruction on the A09-29 as shown.
A03
H16
H16
H15
A03
A04
A04
H15
H16 A03
A05
A05 H15
H16
A04
A03
Fix H08 as shown.

10
A09-13
A09-10
A09-28
A09-31
Reserve 0.1cm gap to
facilitate light line passage.
H10 Swimming
pool
A07
(front view) (back view)
A08
E10(wall)
A07
A05
H15
H16
A04
A03
A06
A07
H15
A05
A04
A03
H16
A07
H15
A05
A04
A03
H16
A06 A06A08
A07
H15
A05
A04
A03
H16
A06
A08
A09-31

11
H05
curtain
A09-32
A09-14
A09-15
A09-17
H07
H09
TV console
H05
table sofa
rose
potted plant
A09-36(same as
A09-35)
bed
bedside table
slipper H06
A09-33、
A09-34(same as
A09-35)
H11 H12
piano
piano
stool
H13
beach chair
H07 paste along
the dotted line
Statement: the lamp wires cannot be
inserted into the output socket.
– – Can use 2 piece AAA size battery
– – Please notice the place of anode
and cathode when pit in the batteries
– – Rechargeable batteries are not blunt electricity
– – Rechargeable batteries can only be charged
under adult supervision
– – Rechargeable batteries should be
removed from the toy before charging
– – Different types of batteries cannot mix;
Do not mix new batteries in use with semi-used
batteries.
– – Run out of battery should be removed from the toy
– – The power shall not be short circuit
H09 paste along
the dotted line
How to assemble the battery holder
A09-08
(Making method of
A09-08 is same as
A09-07, remove phot
frame support.)
A09-09(Same as A09-08)

12
F16
F17
Twist the following wire together:
(I) BLACK wire from the battery box with the WHITE
wire from LED bulb.
(II) RED wire from the battery box with the GREY
wire from LED bulb.
Roll and seal the duly twist copper with
the white tape F17 provided.
Place the battery box in the allocated space.
Installation of dust proof cover
(For updated version, the parts need to be purchased separately)
G04 Transparent cover
17*10*0.15cm 1piece
Trim all the LED wiring to
the same length.
red wire from battery box
black wire from battery box
white wire
from LED lamp
grey wire
from LED lamp
G05 Transparent cover
11.2*10*0.15cm 2pieces
G06 Transparent cover
10*2.4*0.15cm 1piece
G07 Transparent cover
17*11.5*0.15cm 1piece

13
G04
G05
G05 G06
G07
1. Tear off kraft paper of each
piece of transparent cover.
2.Paste G04,G05,G06 and G07 together to complete
the dust proof cover as shown.
Photo of Dust proof cover

14
Photo gallery

Attention: Please keep the instruction for future enquires after installation.