Hongda USA Gibbon Sushi M2011 User manual

M2011
M2011 Instruction manual
Gibbon
Sushi
Gibbon
Sushi

1 2
Tips for assembling
1.Picures shown on the package may be slightly different from the actual product.
2.All the materials are taken in the operation step, put the remaining materials back into the original pocket until the installation is completed.(Avoid material loss during installation)
3.The dimensions indicated in the step diagram are“cm”.
4.If there have template paper material, please cut the material according to the template to avoid mistakes..
5.According to the part rule example at the bottom of this page, refer to the part on the part number drawing, find the material object and compare with the material list, confirm and
install.(Wooden parts only)
6.Glue should not be applied too much, so as not to dry longer, overflow will affect the effect of the finished product.
7.Part shapes may differ from the photographs depending on the production batch.
Testing on LED function
Be sure to test the LED lights before making the lighting, note that the LED white
wire to the negative, gray wire to the positive reference to the following figure
operation test.
DO NOT contact the
LED wire end direct
to the battery cell.
Use the provide battery
holder. Make sue the
correct polarity.
1 2
How to assemble the battery holder
1.Material and tools needed:
- Battery holder, LED bulb,
tape, screw driver and 2 piece
AAA size battery(not provided)
2. Use screw driver
and take the lid off
from the battery holder.
3. Insert the battery take
notes on the polarity.
4. Connect the red wire
to grey wire. Connect
the black wire to white wire.
5.Wrap the exposed
wire with the tapes.
6. Place the box lid and
fastness with screw driver.
“-”negative
“+”positive
Example of parts rule:
1.The A01 is in the color box; The B01 is in the B Bag, The C01 is in the C Bag, etc.
(Note: The printing paper that we mention in step are in the PP bag and parts number is A12-01)
2.The B11, B17,B18,B19, C02,C03, C07,C08,C12, C13,C14,C15, C16,C17 are in A Bag A13.
Tips For Assemble Wooden Piece
Shave with a knife on the
connection point gently,
that you can take it out.
Use knife to smooth out burrs. Or use sandpaper to
smooth the burrs.
1

Printing
Paper
Auto Sushi
Table
Tatami Dining
Table
High Chair
Dish
& Shusi Box
Sushi
Sushi Roll
&
Pot Rice
Showcase
Wooden
Shoes
Takeaway
Rack
Batten
&
Doorplate
Door
& Window
Lantern
They are total 6 pieces of A4 paper,
1 piece of single printing A5 printing
paper and template paper in A
Bag A12
B Bag+Printing Paper
Printing Paper
C Bag+Printing Paper
C Bag+E Bag+Printing Paper
C Bag+Printing Paper
Seat
Chair
B Bag+E Bag+Printing Paper
Wine Bottle
&
Wine Cabinet
D Bag+E Bag+Printing Paper
+Template Paper
Umbrella E Bag+F Bag+Printing Paper
Art Flower
Arrangement
Potted
Plants
Small Parts
A Bag+D Bag+E Bag+F Bag+
Printing Paper
2
B Bag+Printing Paper
B Bag+E Bag+Printing Paper
B Bag+E Bag+Printing Paper
+Template Paper
B Bag+E Bag+F Bag
+Printing Paper
+Template Paper
C Bag+E Bag+F Bag+
Printing Paper
+Template Paper
A Bag+C Bag+E Bag
+Printing Paper
+Template Paper
Menu & Flag
& Signboard
C Bag+Printing Paper
D Bag+G Bag+Printing Paper
Advertising
Lights Board
B Bag+E Bag+F Bag
+Printing Paper
E Bag+F Bag+Printing Paper
E Bag+F Bag+Printing Paper
E Bag+F Bag+Printing Paper
+Template Paper
Roof
&
Paper
Lantern
The Frame
Of The
First Floor
The Frame
Of The
Second Floor
A Bag+D Bag+F Bag+G Bag
+Printing Paper
A Bag+D Bag+E Bag+F Bag
+Printing Paper
Assemble the
Battery Box
G Bag+Printing Paper
Contents
Name Material Package Name Material Package
Thumbnail of material list( reference only)
Thumbnail of printing paper &template paper( reference only)
Welcome to the little DIY
world, now come with me
A
B
A
B
A
B
A
B
A
B
A
B
A
B
A
B
1
Symbol description used
Install parts
in the opposite
direction
Install the same
parts on both
sides
Pay attention to the direction of installation material B
stick to material A
Pay attention to the direction of installation material A
stick to material B
Fold in half
according
to dotted lin
fold double edge
to center dotted
line
Fold four sides
to the middle
1
123
combination part
according so on.

3
A12-53
A12-14
A12-13
Auto sushi table
B14 B14 B15 B15 B16
B17 B17 B18 B 18
B19 B20
2
2
3
3
B14
B15 B15 B14
B16
B18 B17
B18 B17 A12-13
A12-13 A12-14 A12-14
A12-53
B19
B20
(This picture is just for show
results ,no need stick in
temporarily)
1 2 3 4
5 6 7 8
9 10 11 12
15 16 17 1813 14
0.7CM
(left side)
(right side) (front side) (back side)
B19(back side)
B17 B17 B18 B18
B19
Please cut out B17, B18, B19 in A13 before making

Tatami dining
table
B05 B05
B13 A12-29
A12-44
B06
B06
B06
B06
B06
B06
High chair
B01
Please cut out E01 and E19 according
to the template before making.
B01 B01 B01 B01 B02 B02 B02 B02 B02
B03 B03 B03 B03 B03 B03 B03 B03 B03 B03
B04 B04 B04 B04 B04
E19
(cushion)
E03
E01
(cushion)
Use same way, make 11 pieces,
here only need 5 pieces,
left 6 pieces will be use
for seat chair
1 2 3 4
5 6 7 8
3 4 5 61 2
B06
B05
B06 A12-44
Use same way, make 2 pieces.
B06
B13
B06
A12-29
E03
E19
Stick E19 to E03,and cut it
according to the E19 size
E19
E03
E01
E19
(back side)
4

5
Seat chair
Please cut out E01 according
to the template before making.
E01(back pad)
Use same way, make 5 pieces
Use same way, make 6 pieces.
Dish & sushi box
A12-50
A12-48 A12-49
A12-22
B07 B07 B07 B07
B07 B07 B08 B08
B08 B08 B08 B08
Use same way,
make the left dishes.
9 10 11 127 8
1 2 3
5 6 74
3 4 5 1 2
(front) (back)
B01
B02 B03 B03
B04
E01
B08
E01
E01
B07
A12-48
Cut at the dotted line,
and adhere to the white area A12-50
A12-50
A12-48
A12-49

6
Sushi
E03
(rice)
E04
(yellow sushi)
E05
(light orange
Sushi)
E06
(rose red
Sushi)
B09 B10
B11
E07
(orange sushi)
E03
E14 E15 E16
A12-02
Cut out 1.5CM
Cut out 0.7CM
E07
(need make 4 pieces)
E07
(need make 3 pieces)
E06
(need make 5 pieces)
E06
(need make 1 piece)
E04
(need make 5 pieces)
E04
(need make 6 pieces)
E05
(need make 4 pieces)
E05
(need make 6 pieces)
Use same way ,make 3 pieces.
1 26
A12-22
7
E03
E07
Stick E07 to E03,
and cut it according to E07 size
E07
E03
Cut out width about 0.3 CM
0.3CM
Cut out length about 0.8CM
0.8CM
A12-02
A12-02
E07
Using the same way, make the rest in the following quantities.
3 4
6 7 85
9 10
A12-02
E03(rice)
A12-48(gray dish)A12-48(white dish)A12-48(white dish)
11 12 13 14
A12-02
0.3CM
Please cut out B11 in A13 before making,
and cut out E03, E04, E05, E06, E07 according to the template

7
Sushi roll & pot rice Please cut out E03, E04, E05, E06, E07
according to the template before making.
B10
B10
F15
F16
F01
E14
E15
E16
E03 E04
E03
(Sushi roll)
E06
(Sushi roll)
E06
(Sushi roll)
E04
(Sushi roll)
E05
(Sushi roll)
E07
(vegetable
slices)
E03
(Sushi roll)
Use same way, make 2 pieces.
A12-04
E04 E04
Cut E04 into 2 small pieces.
E04
E06 Sushi A12-48(orange dish)
E03 E03
Cut out 2 pieces of 0.4 * 0.7CM A12-48(purple dish)
E03 E03
E14
E15
E16 E04 Sushi
A12-48(red dish)
E04 Sushi
E16
A12-48(red dish)
B10
E06 Sushi
E04 Sushi
E05 Sushi
E16 E15 E14
B09 E05 Sushi
E04 Sushi E07 Sushi
E16
E14
B11
E05 Sushi
E07 Sushi
E04 Sushi
E16
A12-22
(Sushi box)
E04 Sushi
E07 Sushi E06 Sushi
E05 Sushi E03 rice
E16
E03
(Sushi roll)
A12-04(back side)
28 29 3027
17 18 19 2015 16
23 24 25 2621 22
31 32
1 2

8
Use same way , make 3 pieces.
5 6 7 83 4
11 12 13 149 10
17 18 19 2015 16
23 24 25 2621 22
E06
Cut out 3 pieces high 0.4CM
0.4CM
Cut 3 pieces of E04
E04
B10
E03
(Sushi roll)
E06
(Sushi roll)
E05
(Sushi roll)
E04
(Sushi roll)
0.4CM
Cut out 5 pieces high 0.4CM A12-48(gray dish)
B10
E15 F01
Cut out about 0.1CM Cut in a half Cut out 1 piece E03+E04
use previous Sushi material
E04
E03
Then shred it.
F15
Coated with a layer of glue.E03+E04 E07(vegetable slices)
F01
E14
F16
E16
E03+E04

Wine Bottle
& Wine Cabinet
Please cut out E02
and E09 according
to the template
before making.
C01
C01
C09
C10
E17
F02 F02 F02 F03 F03 F07 F07
F10
E21
E02
(round bottle wine)
E02(tall bottle wine)
E09
(tall bottle wine)
A12-40 A12-41 A12-42
A12-43 A12-32 10CM
4CM
3CM
Use same way, make 2 pieces.
Use same way, make 3 pieces.
1 2 3 4
5 6 7 8
11 12 13 149 10
17 18 19 2015 16
C09
C01
C10
C10
C10
C01
E21
A12-32
F03
E21
E21
Twist E21 into 2 pieces
E02(round bottle wine)
F02
trim the edge of E02
A12-40
A12-41
F07
F08 F08
F08
E02(tall bottle wine)
E21
Twist E21 into 2 pieces
9

10
0.3CM
Place the wine bottles as shown in the picture,
and leave the remaining wine bottles behind.
Please refer to the previous steps,
twist E21 and cut out 3 CM.
Sushi
display
E11
1CM
Cut out 10 pieces
E11
F11 F11 F11
Use same way, make 2 pieces
Use same way, make 3 pieces
Showcase
Please cut out C12, C13, C14,
C15, C16 in A13 before making,
and cut out A11, E20 according
to the template.
C12
C13
C14
C15
C17 C16
C13
As shown above,
the rest of the sushi is kept
behind and made.
A12-19 A12-18
A12-28
G01
A11(Showcase-1)
A11(Showcase-2)
E20
(Showcase-1)
E20(Showcase-2)
23 24 25 2621 22
29 30 3127 28
2 31
5 64
E21
A12-43
E17
F10 Cut E17 and keep 0.3CM
E09
E21
For easy to make ,
can twist E21 thinner. A12-42
wine bottle
Sushi roll
F11
F11
E11
E11
pot rice
E11
E11
E11
F11
3CM
C12
C17
C14C15
C16
C13
C13
Sushi
Sushi

11
E20
C17
Use same way, make 2 pieces
A12-28
Wooden
shoes
A12-45
3 4 5 61 2
9 10 11 127 8
15 16 17 1813 14
1 2 3 4
C13
A12-18
C13(back side)
E20 C13
C13
C12
C14
C15
1.2CM
Put the product in tilt
G01
C16
C17
A12-19
A11(Showcase-1)
A11(Showcase-2)
Lightly cut a mark on the back of A11.
A11(Showcase-2)
C02
C03
C03
A12-45
Use same way, make the rest.
C03 C03 C03 C03
C03 C03C03C03
C02 C02 C02 C02
Please cut out C02 and C03 in A13 before making.

12
Takeaway
rack
C07 C07
C08
E21
A12-05
A12-09
A12-03 11CM
Batten
& Doorplate
C19
C18
A12-30
A12-31
A12-51
1 2 3 4
5 6 7 8
11 12 13 149 10
1 2 3
C07
C08
C07
A12-03
A12-09 Use same way, make the rest
E21
Twist E21 into 2 pieces
E21
A12-09
Twist to 90 degrees The two ends will be
merged and glued.
E21
A12-09
A12-05
C19
A12-51
A12-51
C18
A12-30
A12-31
bend A12-31 and glue
both ends to A12-30
Please cut out C07 and C08 in A13 before making.

13
Menu & Flag
& Signboard
C04 C05
C06 C11 C20
A12-27 A12-34A12-07
Door & window
Please cut out E08
according to the
template before making.
D06 D06 D07
E08(door)E08(door)A12-36
use same way, make 2 pieces
（back side)（front side)
Advertising
lights board
A12-52
D08 G01
3 4 521
8 9 1076
1 221
3 443
C05
C04 C06
A12-07
2
11
2
A12-27
folds and bonding
C20
A12-34(back side)
C11
E08
D06
A12-36
D07
A12-52
G01
D08
（front side) （back side)

14
Lantern
G01 G01
F09 F09 F09 F09 F09
F09 F09 F09 F09 F09
E11
A12-46
A12-47
Use same way, make 2 pieces
Complete the rest in the same way,
where there is no need to
install the steps of the lamp.
1.5CM
E11
Umbrella
E17
F17
A12-10
3CM
3 421
7 865
11 129 10
1 2 3 4 5
A12-46 A12-46
A12-47
G01
A12-46 F09 F09
Bend E11 in half
E11 E11 E11
A12-10
Cut at the dotted line and
bond with the thick black line. E17
F17

Art flower
arrangement
B10 B12 B12
E12
E14
F08
Potted
plants
F08 F12
E12
A12-15
A12-16
4cm * 1 strip
3.5CM*1 strip
3CM*2 strip
2.5CM*2 strip
0.7CM
6CM
5CM
4CM
3 421
7 865
3 4 5 61 2
9 10 11 127 8
B12
B10
B12
E12
Cut E12 to 22CM length
and fold it evenly
About
3cm
Cut off the top end Cut four of them to
different lengths.
Plug the E12 into F08 and
bend it into a different shape
F08
E14
A12-16
Folds and bonding Cut out the graphics one by one
E12
F08
Bend each one as picture
A12-16
Stick A12-16
A12-15
Follow the previous steps to
cut out A 12-15 one by one.
E12
A12-15
F12
Refer to the gray line and
cut it as shown in the figure.
15

Small parts
Please cut out E10 according
to the template before making.
F04 F05 F06 E21
A12-06
E10(blackout-1)E10(blackout-2)
2CM
Roof tile
& paper light
D05
A11(roof)
A11(house along)
Use same way, make 2 pieces
F14
G01
D16
E08
(paper
lantern)
1.6cm per interval
3 421
7 865
3 421
7 865
F05
F06
E10
F04
Roll up E10 from the bottom
2CM
E21
A12-06
A11
(house along)
D05
A11(roof )
E08
F14
Wrap F14 with E08 and tighten
both ends(Note that the pupil
of F14 is aligned with
both ends and then screw) Cut off the extra ends of E08
G01
D16
Insert G01 bulb into F14
A09
A09
A09
16
E21
Screw e21 out of a single strip
Paste side by side
Use same way, make the rest.
Please cut out E10 according
to the template before making.
Please cut outA10, E08 according
to the template before making.

The frame of
the first floor
A01 A02 A03
A04
A05 A06 D04
A12-01
E11
F11
A12-11
A12-20
A12-26 A12-25
A12-35
A12-38
A12-39
3 421
7
8
65
910 11
A01
A12-01
A02
A12-20
A04
(front)
A12-26
A04
(back)
(front)
(back) (back)
D06
D06
(front)
A05
A12-38
17
A12-35

Upgraded accessories
(need to be purchased separately)
H01clockwork
movement
（1 piece）
H02 movement
screw
（3piece）
H03 movement
handle
（1piece）(inside)
H01
(outside)
A03(back side)
14 15 16 1712 13
18 19 20
21 22 23
D04
A06
(Fold at right angles
according to the dotted line)
A12-25
A12-39
A06
A06
(front side)
(back side)
A12-11
A01
A02
Align the gray reference
line and paste.
A03(A)
A04(B)
A05
A06
18
A12-25(back side)
H02 H03
H02 H02

wine
bottle
The frame of
the second floor
A07
A08
A10
D02 D02 D02 D02 D02
D03 D03 D03 D03 D03
D09 D09 D11
D12
D13
D14
D14
D15
D15
D17 D17
D17D17
D18
D19
D19
D20
G01
F13
A12-08
A12-24
A12-21
A12-33 A12-37
24 25 26
27 28 29
Potted plants High chair
Auto Sushi Table
Add Sushi, wine bottle
F11
E11
19
Add Sushi, rice pot, high chair Add cups and chopsticks (Please refer to page 10
and make 10 pieces for E11 production method).