Hored AI1010G-Apollo User manual

User Manual
AI1010G-Apollo
10 Port Gigabit AI Cloud PoE switch

Overview:
AI1010G-Apollo is a 10-port Gigabit AI PoE switch, support the management of Apollo
cloud ,It has 4 working modes, AI VLAN mode, AI CCTV video monitoring mode, AI power
mode, AI QoS mode. All ports are free to communicate by default; In AI VLAN mode, 1
-8ports are isolated from each other, which can effectively restrain network storms and
improve network performance. In AI Extend mode, the effective transmission distance of
1-8 ports can reach 250 meters, which is suitable for remote monitoring and power supply.
In the AI power supply mode, the switch automatically detects the working status of the
PD device and finds that the device abnormal automatically restarts the device. In AI QoS
mode: the video data will be processed preferentially when the device is congested to
make the video smoother
The device supports IEEE 802 af/at standard, which can automatically detect and
identify the PDs that comply with the IEEE 802 af/at standard and provide power for them,
so there is no need to worry about PoE or non-PoE devices that can damage private
standards.
Key Features
AI Extend: 1-8 port supports 250M meters long distance power supply (recommended
cat 5 or above)
AI VLAN: Isolating ports 1-8 from each other, restrain network storms effectively and
improve network performance
AI QoS: Prioritize the identified video data to make video transmission smoother
AI PoE: Automatic detection power of port, power off and restart the device if find
dead machine
Support the management of Apollo cloud
Supports IEEE 802.3af/at standard, automatically detects and identifies devices that
comply with the IEEE 802.3af/at standard and supply power to it
Support Auto MDI/MDIX;
Adopt store-and-forward exchange method
Intelligent power supply, the lowest power consumption, ensure PD power needs
With power circuit protection, protect the safety of PD
No configuration characteristics of the power supply is automatically supplied to the
adaptive equipment;
Fanless design, energy saving and environmental protection; no noise, reduce the
impact on the environment
Compact size design
Support port without link power saving function
All ports have wire-speed forwarding capability
Plug and play, easy to use

Technical Specification
Network Port
· 8 10/100/1000Mbps PoE RJ45 port (port 1～port 8)
· 2 10/100/1000Mbps non-PoE RJ45 port(port 9~port 10)
Transfer Rate
· 1000Mbps full Duplex
Network protocol
and standard
·IEEE802.3i, IEEE802.3u, IEEE802.3x,
IEEE802.3ab,IEEE802.3af IEEE802.3at
Performance
·Bandwidth: 20Gbps(no block)
·Frame filtering and transmission rate:
10M port maximum 14,880pps
100M port maximum 148,810pps
1000M port maximum 1,488,100pps
LED indicator
·Power
.RESV
·LINK/ACT
PoE Pin
·1/2(+)，3/6(-)
Power
·Max. output power single port: 30W
·Max Power supply: 96W
Dimensions
·Size (LxWxH): 184mm*94mm*27mm
·Weight: 0.8kg
Environment
·Operating Temperature: 0°~40°C
·Operating Humidity:: 10%~90%, Non-condensing
safety regulations
·CE/ROHS/FCC/CCC

Installation diagram
Notice： The diagram is for reference only.
Indicator Status:
Indicator
Indicator
Description
Normal
Status
Abnormal Status
PWR
Indicator
Power
Indicator
Yellow
light on
If the light is not on, Please check external socket
power supply if it is normal/adapter power
connection if is correct or not etc..
LINK/ACT
Indicator
PD device
connection
indication
Green
light on
If the light is not on. Please check the
corresponding RJ45 port if connected network
devices, PoE power normal, cable connected
correctly, cable damaged, network devices
destroyed or not etc..
Caution
1. In order to safety, please non-professionals don’t open the casing of product;
2. Please be careful the risk of strong current and security protection when products carry
power;
3. Please select the right power adaptor provide power for PoE switch, before using please
confirm if is it accord with the requirement of PoE switch;
4. Please don’t use PoE switch under the humid environment, avoiding water go into the
product inside caused PoE switch breakdown.
5. Please start the power after the circuit connected;
6. Please don’t plug-in and plug-out the connection cable when product is carrying on
power;
7. Please don’t use PoE switch under somewhere with more dust and EME;
8. Please don’t put heavy thing on PoE switch, in order to having an accident.;
9. According to the IEEE802.3AF/AT standard, Please use the Cat.5 or above, transmission
distance 250 m;
10. Please don’t exceed the maximum output power of PoE switch when it connect more
than one PD device;
11. Suggestion that PoE switch use for indoor, if you want to use for outdoor, Please install
waterproof box.