Hored AI106 User manual

User Manual
AI106
6 Port AI PoE Switch

深圳
Overview
AI106 is 6 port intelligent PoE switch Support the management of Apollo cloud,with 4
working modes, AI VLAN mode, AI Extend mode, AI power mode, AI QoS mode. By default,
all ports are free to communicate; when AI VLAN mode is enabled, 1-4 ports are isolated from
each other, which can effectively suppress network storms and improve network performance.
In the AI Extend mode 1-4 ports can effectively transmit distances up to 250 meters, which is
suitable for remote monitoring and power supply. In the AI power mode, the switch
automatically detects the working status of the PD device and finds that the abnormal device
automatically restarts the device. In the AI QoS mode, when the device is congested, the video
data is processed preferentially to make the video smooth. The device supports the standard
IEEE 802 af/at protocol, which can automatically detect and identify the PDs that comply with
the IEEE 802 af/at standard and provide power for them, so there is no need to worry about
PoE or non-PoE devices that can damage private standards.
Main characteristics
AI Extend: 1-4 ports support 250 meters long distance power supply (should be use cat5e
or cat6 cable).
AI VLAN: Isolating ports 1-4 to each other can effectively suppress network storms and
improve network performance.
AI QoS: Prioritize the identified video data to make video transmission smoother
AI PoE: Automatically detect the power receiving port, find the dead device, power off
and restart the device.
Support the management of Apollo cloud.
Support wireless access points (APs) and network surveillance cameras via Cat 5 cables;
Support IEEE802.3af/at standard PD device；
Supports uplink port auto-flip (Auto MDI/MDIX)
Adopt store-and-forward exchange mechanism
Intelligent power supply, lowest power consumption, ensure the power demand of the PD
terminal
With power circuit protection, it can protect the security of the back-end equipment;
Zero configuration feature power is automatically supplied to the adaptive device;
No fan design to achieve energy saving and environmental protection;
Support port no link power saving function;

深圳
Specification：
Network Port
· 4 10/100Mbps PoE RJ45 port ( Port 1~ port4）
· 2 10/100Mbps RJ45 port uplink(Port5~port 6)
Transfer Rate
· 100Mbps full Duplex，10 or 100Mbps Half Duplex
Network
protocol and
standard
· IEEE 802.3i、IEEE 802.3u、IEEE 802.3x、IEEE 802.3af, IEEE 802.3at
Performance
·Bandwidth：1.2Gbps (no block)）
· Network delay（100 to 100M bps）：maximum 20 μs (using 64 byte packet)
·Frame filtering and transmission rate:
10M port maximum 14,800pps
100M port maximum 148,800pps
LED indicator
Power
RESV
LINK/ACT
POE pin
1/2(+)，3/6(-)；
Power
·Max power for single port30W .
·External power adapter：60W；
Dimensions
·Size（LxWxH）：125mm x 75mm x 27mm
·Weight：0.5kg
Environment
·Operating Temperature：0°~40°C
·Operating Humidity：10%~ 90%，Non-condensing
safety
regulation
· CE/ROHS/FCC/CCC

Installation diagram：
Notice：The diagram is for reference only.
Indicator Status:
Caution：
In order to safety, please non-professionals don’t open the casing of product;
2. Please be careful the risk of strong current and security protection when products carry power;
3. Please select the right power adaptor provide power for PoE switch, before using please confirm
if is it accord with the requirement of PoE switch;
4. Please don’t use PoE switch under the humid environment, avoiding water go into the product
inside caused PoE switch breakdown.
5. Please start the power after the circuit connected;
6. Please don’t plug-in and plug-out the connection cable when product is carrying on power;
7. Please don’t use PoE switch under somewhere with more dust and EME;
8. Please don’t put heavy thing on PoE switch, in order to having an accident.;
9. According to the IEEE802.3AF/AT standard, Please use the Cat.5 or above, transmission
distance 250 m;
10. Please don’t exceed the maximum output power of PoE switch when it connect more than one
PD device;
11. Suggestion that PoE switch use for indoor, if you want to use for outdoor, Please install
waterproof box.
Indicator
Indicator
Description
Normal Status
Abnormal Status
PWR Indicator
Power Indicator
Yellowlight
on
If the light is not on, Please check external
socket power supply if it is normal/adapter
power connection if is correct or not etc..
LINK/ACT
Indicator
PDdevice
connection
indication
Green light on
If the light is not on. Please check the
corresponding RJ45 port if connected network
devices, POE power normal, cable connected
correctly, cable damaged, network devices
destroyed or not etc..