Hored DF5700-24GP-4TF User manual

User Manual
DF5700-24GP-4TF
10 Gigabit uplink layer 3 managed PoE switch

1
Installation manual brief introduction
The Product Installation Manual mainly introduces the hardware
features, installation methods, and precautions during the
installation process of the DF5700-24GP-4TF switch.
This manual includes the following sections:
Chapter 1 : Product introduction. Briefly describe the basic
functions and features of the switch, detailed hardware and
software specifications, and appearance information.
Chapter 2 : Hardware Connections. Guide the connection and
precautions between the switch and other devices.
Chapter 3 : Product Installation. Guide the hardware installation
method and precautions of the switch.
Chapter 4: Product Packaging and Using Recommendations

2
Chapter 1 Product Introduction
1. 1 Product Brief Introduction
DF5700-24GP-4TF is a network management POE switch
designed for security transmission and WIFI coverage. It can
meet the POE power supply requirements
of WIFI AP , IP -camera, WIFI bridge, IP phone and other types
of equipment . Products using the new generation of
high-performance hardware and software platform,
mentioning for flexible, cost-effective access and Gigabit uplink
ports that support Layer 3 routing protocols, comprehensive
security mechanism, improve the ACL / QoS policies and rich
VLAN features , easy to management and maintaining , to meet
the user for easy network equipment management, high security,
low-cost networking requirements, support one stop
management of of Apollo cloud platform, to achieve the state
inspection and monitoring management, applicable to the

3
school park, hotel and business park Network access,
aggregation, and core application scenarios
1. 2 product characteristics
Full Gigabit RJ45 port , 10G optical uplink port
24- full Gigabit R J45 POE Ethernet ports, and 4 X 10G SFP fiber
ports, breaking the traditional limit Fast data transfer without blunt.
Broadcom chip, the performance is more stable and powerful
Brodcom high-performance chip can greatly improve network data
processing rate.
Convenient operation of four buttons
AI Extend: 1- 8 interfaces support 250M remote power supply
(suggested the use of UTP cable to the Internet)

4
AI VLAN: 1- 24 -ports isolated from each other, can effectively
suppress the network storm and improve network
performance
AI QoS: Prioritize the video data of the logo to make the video
transmission smoother
AI PoE: automatically detect power receiving port, found lockup
device, the device power restart
Support one-stop management of Apollo cloud platform
Support cloud platform to visualize management of resources on
switches and PD devices, making operation and maintenance
management easier
1.3 product hardware and software technical
specifications
Hardware parameter
chip
Broadcom high performance chip
Flash
16M B

5
RAM
256 MB DDR
port
24 10/100/1000Mbps RJ45 ports
4 10GE SFP+ ports
1 console port
PoE
power
supply
24 10/100/1000Mbps RJ45 ports support
PoE+ power
The maximum power supply of the whole
machine is 400W.
The maximum power supply per port is 46W.
Indicator
light
28 Link/Act indicators
24 POE indicators
1 Power indicator
1 SYS LED
performa
nce
Forward mode: store and forward
Backplane bandwidth: 128Gbps
Packet forwarding rate: 95.232Mpps

6
Support 16K MAC address table depth
Lightning
protectio
n
±4 KV
ESD
Contact: ± 6 K V Air: ± 8 K V
Input
power
100-240V/50-60Hz
Dimensio
ns
(L*W*H)
440mm × 320mm × 44mm
Software parameter
Network
standard
IEEE 802.3: Ethernet Media Access Control
(MAC) Protocol
IEEE 802.3i: 10BASE-T Ethernet
IEEE 802.3u: 100BASE-TX Fast Ethernet

7
IEEE 802.3ab: 1000BASE-T Gigabit Ethernet
IEEE 802.3z: 1000BASE-X Gigabit Ethernet
(optical fiber)
IEEE 802.3ae: 10GBASE-SR/LR 10G Ethernet
(optical fiber)
IEEE 802.3ad: Standard method for
performing link aggregation
IEEE 802.3x: Flow Control
IEEE 802.1p: LAN Layer 2 Qos/Cos protocol
for traffic prioritization (multicast filtering)
IEEE 802.1q: VLAN Bridge Operation
IEEE 802.1d: STP spanning tree
IEEE 802.1s: MSTP Spanning Tree
IEEE 802.1w: RSTP Spanning Tree
IEEE 802.3af
IEEE 802.3at

8
Quick
function
One-click VLAN
One button Extend (250m power supply)
One button Q0S (video priority)
One button AI P OE
routing
Support RIP V1/V2 dynamic routing
Support static routing
DHCP
Support DHCP server
Support DHCP relay
Support DHCP Snooping
VLAN
Support 4K VLANs
Support 802.1Q VLAN, Port VLAN, Voice
VLAN
PoE
Support setting PoE port priority
Support setting PoE power supply time
period
Support setting port power

9
MAC
address
table
Follow the IEEE 802.1d standard
Support MAC address automatic learning
and aging
Support static, dynamic, filtering address
table
Safety
features
User-based hierarchical management and
password protection
Support user access based on port number,
IP address, and MAC address
Icmp-echo, DoS protection
Support DHCP S nooping, DHCP attack
protection
Support port security, port isolation
Access
control
(ACL)
Support L2 (Layer 2) ~ L4 (Layer 4) packet
filtering
Support port mirroring, port redirection, flow

10
rate limiting, QoS re-marking
Multicast
Support IGMP v1/v2 Snooping
Support for static multicast
Support for multicast VLAN
Quality of
Service
(QoS)
Support 8 port queues
Support port priority, 802.1P priority, DSCP
priority
Support SP, WRR, WFQ priority scheduling
algorithm
Supports automatic identification,
management, and retrieval of information
about attached devices
Spanning
tree
Supports STP (IEEE 802.1d), RSTP (IEEE
802.1w) and MSTP (IEEE 802.1s) protocols
Support loop protection, BPDU protection
Manage
Support WEB network management (HTTP)

11
ment and
maintena
nce
Support CLI (Telnet, local serial port)
Supports SNMP V1/V2/V3, compatible with
public MIBS
Support LLDP, RMON
Support S NMP protocol
Support A pollo cloud platform one-stop
management and maintenance
Support IP source protection, DoS protection
Support CPU monitoring, memory
monitoring
Support system log
Support cable detection
Multicast
Support IGMP v1/v2 Snooping
Support for static multicast
Support for multicast VLAN

12
1.4 product appearance
front panel
Includes indicator light, RJ45 port, shortcut function button , RST
button, 10GE SFP + port , CONSOLE port , as shown below
indicator
The working information of the DF5700-24GP-4TF indicator is
shown in the following table.
Indicat
or
light
name
colour
Worki
ng
status
Description
POWE
R
Power
Indicato
red
Consta
ntly
Power on normally

13
r
bright
not
bright
No power, power
switch is not turned on,
power supply is
abnormal
POE
POE
power
indicato
r
red
Consta
ntly
bright
The corresponding
RJ45 port is connected
to the powered device
and the power supply
is normal.
not
bright
The corresponding
RJ45 port is not
connected to the
powered device or the
power supply is
abnormal.

14
LINK/A
CT
Device
connect
ion
indicati
on
green
flicker
The corresponding
RJ45 port is connected
normally.
not
bright
The corresponding
RJ45 port is not
connected properly.
SYS
System
indicato
r
green
flicker
The system works
normally
not
bright
The system is not
working properly and
the software is
damaged.
X G1-4
SFP
indicato
r
green
flicker
The
corresponding SFP+ p
ort is connected
normally.

15
not
bright
The
corresponding SFP+ p
ort is not connected
properly.
shortcut function button
AI QOS: Improve video data processing
capabilities and improve carton and mosaic in
surveillance networks
AI Extend : 1-8 port rate reduced to 10Mbps,
but the maximum transmission distance of up to 250
m
AI VLAN: 1- 24 ports are isolated can
effectively suppress the network storm and improve
network performance.

16
AI power supply: detect the power port device,
find the dead device, power off and restart the
device
RJ45port
DF5700-24GP-4TF supports 24 th 10/100 / 1000 Mbps
ports, and supports IEEE802.3af IEEE802.3at standard POE
power supply ,When the switch works in AI Extend mode,
ports 1-8 can support 250 meters.
10Gbps SFP + port
DF5700-24GP-4TF provides four 10GE SFP + optical
module expansion slots ( XG1 , XG2 XG3 XG4 ) , which can
be inserted into 10GE SFP module SFP+ copper cable
RST button
Under power connection situation, press the button and
released with a needle, device gets into the restart state,
when the SYS light on again,device

17
rebooted successfull.,Under power connection situation,
press the button with a needle above 5sec or more to
enter Reset state, when SYS lights up again, the device
reset is successful.
Console port
The Console port is used to connect to the serial port of a
computer or other terminal to manage or configure the
switch.
rear panel
Includes : power outlet, power switch, ground terminal

18
Power outlet
Connect the power cable to the DF5700-24GP-4TF . The
power supply needs to be 100-240V~ 50/60Hz AC
power.
Power switch
Fluctuating power switch, controlling the power switch,
ground terminal
Use a wire ground to prevent lightning strikes. To avoid
product lightning strikes and extend the life of the
product
chapter 2 Hardware connection
2 .1 port RJ45 connection
Use the network cable to connect the switch to the RJ45 port
of the peer network device. By default, the switch's downlink port
has POE power supply enabled. It can be used for AP, bridge,

19
network camera and other power receiving devices that comply
with IEEE802.3af and IEEE802.3at standards. PoE power supply
Note:
When the switch is connected with workstations, servers, routers or
other Ethernet devices, the network cable length should not be
more than 100 meters; Switch Ethernet port auto-mdi /MDIX
function is turned on by default. When 5 types of twisted pair wires
are used to connect Ethernet, standard network cable or cross
network cable can be used;
Do not connect RJ45 to the phone line.