Hored IS104GPS-2F User manual

User Manual
IS104GPS-2F
6-port Gigabit managed PoE switch

1
Installation Manual Introduction
<User Manual> mainly introduces the hardware features,
installation methods, and precautions during the
installation of IS104GPS-2F.
This manual includes the following sections:
Chapter 1: Product introduction. Briefly describe the basic
functions and features of the switch, detailed hardware
and software specifications and appearance information.
Chapter 2: Hardware Connections. Guide the connection
of switch with other devices and precautions.
Chapter 3: Product Installation. Guide the hardware
installation method and precautions.
Chapter 4: Product Packaging and Use Recommendations.

2
Chapter 1 Product Introduction
1.1 Product introduction
The IS104GPS-2F is a 6-port Gigabit-managed industrial PoE
switch that provides 4 Gigabit ports and 2 Gigabit SFP ports. Each
PoE port can provide up to 46W for IEEE802.3af /at compatible
powered devices (PDs).It is especially suitable for applications
where AC power is not easily available or high wiring costs. It
support EMC industrial grade 4 protection; corrugated
high-strength aluminum profile housing, IP40 grade, low power
design, seismic rail mounting, -40°C-75°C operating temperature,
can work in harsh environments; IS104GPS-2F also supports Apollo
cloud one-stop management platform for status checking and
management monitoring,to make it become a reliable solution for
Intelligent transportation, video surveillance and other harsh
industrial environments.

3
1.2 Features
Full Gigabit Ethernet port
4 full Gigabit RJ45PoE network port, and 2 Gigabit SFP ports,
breaking the traditional 100M limitation, data transmission will not
stuck
Broadcom high performance industrial grade chip for more
stable performance
Broadcom high-performance industrial-grade chips that
dramatically increase network data processing rates
Powerful working environment
EMC industrial grade 4 protection; corrugated high-strength
aluminum profile housing, IP40 grade, low power design, seismic
rail mounting, -40°C-75°C operating temperature, can work in
harsh environments

4
Support Apollo cloud platform one-stop management
Support cloud platform to visualize management of switches and
attached power devices, making operation and maintenance
management easier
1.3 Software and hardware specifications
Hardware specification
Chip
Broadcom high performance chip
Flash
16MB
RAM
64MBDDR
Port
4 10/100/1000M RJ45 Port
2 1000M SFP Port
PoE Power
supply
410/100/1000MbpsRJ45Port support
802.3af/atPoE power supply
The maximum power per port is 46W

5
Indicator
6 Link/Act indicator
4POEindicator
ALM Alarm indicator
P1、P2 Power Indicator 1 SYS indicator
Performance
Forward mode: store and forward
Backplane bandwidth: 12Gbps
Packet forwarding rate: 8.9Mpps
Support 8K MAC address table depth
Standard
protocol
IIEEE 802.3: Ethernet Media Access Control
(MAC) Protocol
IEEE 802.3i: 10BASE-T Ethernet
IEEE 802.3u: 100BASE-TX Fast Ethernet
IEEE 802.3ab: 1000BASE-T Gigabit Ethernet
IEEE 802.3z: 1000BASE-X Gigabit Ethernet
(optical fiber)

6
IEEE 802.3ad: Standard method for performing
link aggregation
IEEE 802.3x: Flow Control
IEEE 802.1p: LAN Layer 2 Qos/Cos protocol for
traffic prioritization (multicast filtering)
IEEE 802.1q: VLAN Bridge Operation
IEEE 802.1d: STP spanning tree
IEEE 802.1s: MSTP Spanning Tree
IEEE 802.1w: RSTP Spanning Tree
IEEE 802.3af
IEEE 802.3at
Industry
Standard
EMI:FCCCFR47 Part 15, EN55022/CISPR22,
Class A
EMS:
IEC61000-4-2 (ESD): ±8kV (contact), ±15kV

7
(air)
IEC61000-4-3 (RS): 10V/m (80MHz-2GHz)
IEC61000-4-4 (EFT): Power Port: ±4kV; Data
Port: ±2kV
IEC61000-4-5 (Surge): Power Port: ±2kV/DM,
±4kV/CM; Data Port: ±6kV
IEC61000-4-6 (CS): 3V (10kHz-150kHz); 10V
(150kHz-80MHz)
IEC60068-2-6 (Vibration)
IEC60068-2-27 (Shock)
IEC60068-2-32 (Free Fall)
Operation
environment
Working temperature: -40 ~ 75 ° C
Storage temperature: -40 to 75 ° C
Relative humidity: 5% to 95% (no
condensation)

8
Certification
CE, FCC, RoHS
Mean time
between
failures(MTBF)
100,000 hrs
Warranty
3 years
Lightning
protection
Network port: ±6KV power port: ±4KV
ESD
Contact: ±8KV Air: ±15KV
Physical
specification
Input:48-56VDC
Housing: IP40 grade protection, corrugated
high strength metal housing
Installation: DIN rail mounting
Size:163mm×46.5mm×110mm，Weight：1kg

9
Software specification
Global control
button
AI PoE
AI Loop Protect
AI VLAN
AI Extend
Hardware
watchdog
Support
Traffic
Statistics
Support
Port energy
saving
Support
DHCP
Support DHCP Snooping
VLAN
Support 4KVLANs
Support 802.1QVLAN、MAC VLAN ,IP VLAN
Voice VLAN

10
MAC address
Follow the IEEE 802.1d standard
Support MAC address automatic learning and
aging
Support static, dynamic, filtering address table
Safety
features
Password protection
Support restrict user access based on port
number, IP address, and MAC address
Support HTTPS、SSLV3、TLS V1、SSHV1/V2
Support IP-MAC-PORT ternary binding
Support ARP protection, IP source protection, DoS
protection
Support DHCP Snooping and DHCP attack
protection
Support 802.1X authentication, AAA
Support port security, port isolation

11
Support CPU protection
POE
management
Support PoE power limit
Support viewing of PoE chip status
Support to set PoE port priority
Support to set PoE power supply time period
QoS
Support 8 port queues
Support port priority, 802.1P priority, DSCP
priority
Supports SP, WRR, and RR priority scheduling
algorithms
Supports automatic identification, management
and retrieval of information about attached
devices
Spanning
tree
Supports STP (IEEE 802.1d), RSTP (IEEE 802.1w)
and MSTP (IEEE 802.1s) protocols

12
Support loop protection, root bridge protection,
TC protection, BPDU protection, BPDU filtering
Multicast
SupporIGMPv1/v2 Snooping
Support fast leave mechanism
Support multicast VLAN
Supports multicast filtering, packet statistics, and
unknown multicast discards.
Storm
suppression
Support multicast suppression
Support broadcast suppression
Support unknown unicast suppression
Link
aggregation
Support static aggregation
Support dynamic aggregation
Support IP, MAC, hybrid load balancing mode
Supports up to 32 aggregation groups
IPv6
Support IPv6 Ping、IPv6Tracert、IPv6 Telnet

13
Support IPv6SSH 、IPv6SSL
Management
and
maintenance
Support WEB network management (HTTP,
HTTPS, SSLV3)
Support CLI (Telnet, SSHV1/V2, local serial port)
Support SNMP V1/V2/V3，
Support LLDP、RMON
Support ARP protection, IP source protection, DoS
protection
Support SNMP protocol
Support Apollo cloud platform one-stop
management and maintenance
Support CPU monitoring, memory monitoring
Support system log, grading warning
Support Ping, Tracert detection, cable detection

14
1.4 Appearance
Indicator
Stat
us
Description
P1、P2
On
The corresponding power supply working
normally.
Off
The corresponding power supply is not
connected or working abnormal.
SYS
Blink
System is running normally

15
ing
Off /
alwa
ys
brig
ht
System operation is abnormal / start
unsuccessful
ALM
On
Alarm start up
Off
Alarm not triggered
Link/ACT
F1-F4
Blink
ing
SFP port is working normal
Off
SFP port is working abnormally / port is not
connected

16
Chapter 2. Hardware Connection
2.1 Connect to RJ45 port
Use the network cable to connect the switch to the RJ45 port of
network device. Normally, the switch's downlink port has POE
power supply enabled by default. It can support POE power supply
to AP, bridge, network camera and other PDs which comply with
IEEE802.3af and IEEE802.3at standards.

17
2.2 Connect to the SFP port
The SFP port of the IS104GPS-2F supports only Gigabit fiber
modules. It is recommended to use standard SFP module products.
The process of installing a fiber module on a switch is as follows:
1. Grasp the fiber module from the side and insert it smoothly
along the SFP port slot of the switch until the fiber module is in
close contact with the switch;
2. Confirm the Rx and Tx ports of the fiber module when
connecting. Insert one end of the fiber into the Rx and Tx ports to
ensure that the Tx and Rx ends of the interface are correctly
connected, and the other end of the fiber is connected to another
device.
3. After power-on, check the status of the corresponding
indicator. If the indicator is on, the link is up. If not, please check the
line and confirm that the peer device is enabled.

18
Attention:
It is not allowed to excessively bend the fiber, and its radius of
curvature should be no less than 10cm;
Ensure the cleanliness of the fiber end face;
Please do not look directly into the fiber optic connector with your
eyes, as this may cause eye damage.
2.3 Check before power-on
Check that the power supply of the power outlet meets the switch
specifications.
Check that the power supply, switch, and rack are properly
grounded.
Check whether the switch is connected to other network devices.
2.4 Device initialization
The switch will automatically initialize after the power is turned on

19
and the power switch is turned on.
The indicator light will appear as follows:
After the power is turned on, the power indicator remains steady,
the SYS light enters the blinking state, and the system runs
normally.
The indicator of each port indicates the connection status of each
port, indicating that the switch has started to work normally.
Chapter 3, Product Installation
Before installation, confirm the operating environment of the
equipment: power supply voltage, installation space, installation
method, etc. Please carefully confirm the following installation
requirements:
- Check for cables and connectors required for