Hored AI606 User manual

User Manual
AI606
6 Port AI PoE Switch

Overview
AI606 is 6 port built-in power 10/100Mbps t has 4 working modes,AI VLAN mode, AI Extend
mode, AI PoE mode, AI QoS mode., Standard mode,VLAN mode, Extend mode. In Standard mode,
all ports are free to communicate; In VLAN mode is enabled, 1-4 ports are isolated from each other,
which can effectively suppress network storms and improve network performance. In the AI Extend
mode 1-4 ports can effectively transmit distances up to 250 meters, which is suitable for remote
monitoring and power supply. In the AI PoE mode, the switch automatically detects the working
status of the PD device and finds that the device abnormal automatically restarts the device. In
QOS mode: the video data will be processed preferentially when the device is congested to make
the video smoother. The device supports the standard IEEE 802 af/at protocol, which can
automatically detect and identify the PDs that comply with the IEEE 802 af/at standard and provide
power for them, so there is no need to worry about PoE or non-PoE devices that can damage private
standards.
Main characteristics
AI Extend: 1-4 ports support 250 meters long distance power supply (should be use
cat5e or cat6 cable)
AI VLAN: Isolating ports 1-4 to each other can effectively suppress network storms
and improve network performance.
AI QoS: Prioritize the identified video data to make video transmission smoother
AI PoE:Automatic detection power of port, power off and restart the device if find
dead machine
Support wireless access points (APs) and network surveillance cameras via Cat 5 cables;
Support IEEE802.3af/at standard PD device；
Supports uplink port auto-flip (Auto MDI/MDIX)
Adopt store-and-forward exchange mechanism
With power circuit protection, it can protect the security of the back-end equipment;
Zero configuration feature power is automatically supplied to the adaptive device;
No fan design to achieve energy saving and environmental protection;
Support port no link power saving function;

Technical Specification
Network Port
· 4 10/100Mbps PoE RJ45 port ( Port 1~ port4）
· 2 10/100Mbps RJ45 port uplink(Port5~port 6)
Transfer Rate
· 100Mbps full Duplex，10 or 100Mbps Half Duplex
Network
protocol and
standard 准
· IEEE 802.3i、IEEE 802.3u、IEEE 802.3x、IEEE 802.3af, IEEE 802.3at
Performance
·Bandwidth：1.2Gbps (no block)）
· Network delay（100 to 100M bps）：maximum 20 μs (using 64 byte packet)
·Frame filtering and transmission rate:
10M port maximum 14,800pps
100M port maximum 148,800pps
LED indicator
· Power
· LINK/ACT
·RESV
·PoE Indicator light
PoE pin
1/2+，3/6-；
Power
·Max power for single port30W .
·Internal power adapter：60W；
Dimensions
·Size（LxWxH）：190mm x 40mm x 131mm
·Weight：1kg
Environment
·Operating Temperature：0°~40°C
·Operating Humidity：10%~ 90%，Non-condensing
safety
regulation
· CE/ROHS/FCC/CCC

Installation diagram：
Notice：The diagram is for reference only.
Caution：
In order to safety, please non-professionals don’t open the casing of product;
2. Please be careful the risk of strong current and security protection when products carry power;
3. Please select the right power adaptor provide power for PoE switch, before using please confirm
if is it accord with the requirement of PoE switch;
4. Please don’t use PoE switch under the humid environment, avoiding water go into the product
inside caused PoE switch breakdown.
5. Please start the power after the circuit connected;
6. Please don’t plug-in and plug-out the connection cable when product is carrying on power;
7. Please don’t use PoE switch under somewhere with more dust and EME;
8. Please don’t put heavy thing on PoE switch, in order to having an accident.;
9. According to the IEEE802.3AF/AT standard, Please use the Cat.5 or above, transmission
distance 250 m;
10. Please don’t exceed the maximum output power of PoE switch when it connect more than one
PD device;
11. Suggestion that PoE switch use for indoor, if you want to use for outdoor, Please install
waterproof box.