HP MSM-802.11 series User manual

Key features
First three-spatial stream MIMO AP in the industry
Up to 450 Mb/s per radio on MSM460 and MSM466/MSM466-R access points
Support for a range of indoor and outdoor antennas for the MSM466 and outdoor MSM466-R access points
Comprehensive WLAN security
Indoor APs include Lifetime hardware Warranty 2.0 with 24x7 phone support for three years
Product overview
Working in unison with HP controllers, the HP 802.11n Dual Radio Access Point Series delivers high-performance networking solutions.
The enhanced controller architecture scales to IEEE 802.11n without requiring a controller replacement. The controller provides
advanced radio resource management (RRM), including client load balancing and interference mitigation. The HP wireless controllers
support a fast-roaming capability—an important feature, especially for VoIP communications.
The access points can be used in managed as well as autonomous mode without a controller. The access points provide RF spectrum
analysis with detection and classification of non-IEEE 802.11 interference and have the ability to automatically avoid interference.
Wireless security is comprehensive with integrated Wireless IDS and support for internal and external authentication, authorization,
and accounting (AAA) servers; built-in stateful firewall; per-user VLAN mapping; and authentication.
In addition to working with the HP MSM controllers, these access points work with the new HP 10500/7500 20G Unified Wired-WLAN
Module, the HP 800 Series Unified Wired-WLAN Switch, and the HP WX5002/5004 wireless controllers.
Features and benefits
Management
Wi-Fi Clear Connect
provides a system-wide approach to improve WLAN reliability by proactively determining and adjusting to changing RF
conditions; helps optimize WLAN performance by detecting interference from Wi-Fi and non-Wi-Fi sources using Spectrum
Analysis capabilities built into the access points, identifying rogue activity and making decisions at a system-wide level
Advanced radio resource management
Automatic radio power adjustments
include real-time power adjustments based on changing environmental conditions and signal coverage adjustment
Automatic radio channel
provides intelligent channel switching and real-time Interference detection
Intelligent client load balancing
determines number of clients across neighboring APs and adjusts client allocation to balance the load
Airtime fairness
provides equal RF transmission time for wireless clients
Spectrum analysis
Power/frequency spectrum analysis
measures noise from IEEE 802.11 remote sources
Signal detection/classification
identifies source of RF interference, for example, Bluetooth, cordless phones, and microwave ovens
Evaluation of channel quality
helps detect severe channel degradation and improve the reporting of poor RF performance
Integrated IDS (Premium Mobility version required)
QuickSpecs
HP MSM-802.11n Dual Radio Access Point Series
Overview
DA - 13994 North America — Version 10 — December 9, 2013 Page 1

detects and locates unknown and rogue devices
Access point management
provides secure Web browser (SSL and VPN), command-line interface, SNMP v2c, SNMP v3, MIB-II with traps, and RADIUS
Authentication Client MIB (RFC 2618); offers embedded HTML management tool with secure access (SSL and VPN); implements
scheduled configuration and firmware upgrades from a central controller
HP Intelligent Management Center and Wireless Services Manager Software
provides central management for discovery, logging, status, and configuration management
Diagnostics
client event log records association, authentication, and DHCP events; packet capture tool for Ethernet and IEEE 802.11
interfaces (PCAP format); includes data rate matrix
Enhanced AP survivability
continues to operate using the old IP address while the AP searches for a new controller
Compatible with HP controllers, unified switches, and modules
HP MSM710, MSM720, MSM760, and MSM765 zl Controllers; min. software version 5.5
HP WX5000 Access Controllers; min. software version CMW520-R2308P18
HP 10500/7500 20G Unified Wired-WLAN Module; min. software version CMW520-R6708 on 7500 switch
HP 10500/7500 20G Unified Wired-WLAN Module; min. software version CMW520-R1208 on 10500 switch
HP 830 Unified Wired-WLAN Switch Series controllers, min. software version CMW520-R3308P19
Quality of Service (QoS)
Rate limiting
supports per-wireless client ingress-enforced maximums and per-wireless client, per-queue guaranteed minimums
Centralized traffic
Layer 2 and Layer 3 QoS settings are maintained when using Mobility Traffic Manager or guest access
IEEE 802.1p prioritization
delivers data to devices based on the priority and type of traffic
Wireless
L2/L3/L4 classification
IEEE 802.1p VLAN priority, SpectraLink SVP, and DiffServ
Assigned by VSC
Wi-Fi MultiMedia (WMM), IEEE 802.11e EDCF, and Service-Aware priority
Maximum VoIP call capacity
12 active calls on IEEE 802.11 a/b/g/n
SpectraLink Voice Priority (SVP) support
prioritizes SpectraLink voice IP packets sent from a SpectraLink NetLink SVP server to SpectraLink wireless voice handsets to
help ensure excellent voice quality
Connectivity
IEEE 802.3af Power over Ethernet (PoE) support
simplifies deployment and dramatically reduces installation costs by helping to eliminate the time and cost involved in supplying
local power at each access point location
Auto-MDIX
automatically adjusts for straight-through or crossover cables on the Ethernet interface
Mobility
Three spatial stream MIMO technology
provides the latest in Wi-Fi technology, which allows for 450 Mbps of signaling per radio; delivers potentially more than a 50
percent increase in performance over any two spatial stream product
QuickSpecs
HP MSM-802.11n Dual Radio Access Point Series
Overview
DA - 13994 North America — Version 10 — December 9, 2013 Page 2

Beamforming
provides better coverage area and better performance at distances from the AP
Bandsteering
redirects 5 GHz-capable clients automatically to the less-congested 5 GHz spectrum
Concurrent operation in the 5 GHz band
provides the ability to run both radios in the 5 GHz band for outstanding performance (MSM466 and MSM466-R access points
only)
MSM430 and MSM 460 AP antennas
embedded high-gain antennas (4 dBi antenna at 2.4 GHz and 7 dBi antenna at 5 GHz) provide excellent coverage without the
added cost of external antennas
MSM466 and MSM466-R access points
Optional external antennas options
MSM466 access point includes six indoor RP-SMA connectors; MSM466-R access point includes six outdoor standard N
connectors
Two indoor ceiling mount antennas
provide good coverage when embedded antennas are not an option
Outdoor IP67-rated antennas
two omnidirectional and two directional MIMO antennas are weatherproof IP67 tested for point-to-point, multipoint,
mesh, and outdoor coverage
Anywhere, anytime wireless coverage
includes dual-radio IEEE 802.11a/b/g/n and 802.11a/n access points; per-radio software-selectable configuration of frequency
bands; self-healing, self-optimizing local mesh that extends network availability; Wi-Fi Alliance Certifications for interoperability
with all IEEE 802.11a/b/g/n client devices; and IEEE 802.3af PoE
Medical standards
meets the European EN60601-1-2 standard for healthcare
Virtual Service Communities (VSCs)
includes up to 16 SSIDs, each with unique MAC address and configurable SSID broadcasts; individual security and QoS profiles
per VSC; configurable DTIM and minimum data rate per VSC; VSCs that can be mapped to separate IEEE 802.1Q VLANs; WMM
and/or WMM-PS; a security filter; and an IP filter
AP client access control functions
offers IEEE 802.1X authentication using EAP-SIM, EAP-FAST, EAP-TLS, EAP-TTLS, and PEAP
delivers MAC address authentication using local or RADIUS access lists
provides RADIUS AAA using EAP-MD5, PAP, CHAP, and MS-CHAPv2
supports RADIUS Client (RFC 2865 and 2866) with location-aware support
provides Layer 2 wireless client isolation
Security
Automated AP and client classification
reduces manual effort (administrator can override AP classification)
Comprehensive detection capabilities
detects a wide range of attacks
Flexible event reporting
enables configuration of which events will result in notifications
Location tracking capabilities
helps identify the location of the rogue device
Flexible deployment models
supports time slicing or dedicating a radio to detect fulltime
IEEE 802.1X support
provides port-based user authentication with support for Extensible Authentication Protocol (EAP) MD5, TLS, TTLS, and PEAP
QuickSpecs
HP MSM-802.11n Dual Radio Access Point Series
Overview
DA - 13994 North America — Version 10 — December 9, 2013 Page 3

with choice of AES, TKIP, and static or dynamic WEP encryption for protecting wireless traffic between authenticated clients and
the access point
Choice of IEEE 802.11i, WPA2, or WPA
locks out unauthorized wireless access by authenticating users prior to granting network access; robust Advanced Encryption
Standard (AES) or Temporal Key Integrity Protocol (TKIP) encryption secures the data integrity of wireless traffic
TKIP/WEP encryption
is supported only on legacy IEEE 802.11a/b/g clients as it has been deprecated from the IEEE 802.11n standard
Local wireless bridge client traffic filtering
prevents communication between wireless devices associated with the same access point
Additional information
RFC support
refer to the "Mobility Specification Sheet" for a list of RFCs and other industry standards supported by the MSM solution at
http://h17007.www1.hp.com/docs/mobility/4AA3-3883ENW.pdf
Warranty and support
Lifetime Warranty 2.0
for indoor access points, advance hardware replacement for as long as you own the product with next-business-day delivery
(available in most countries)†
Electronic and telephone support (for Lifetime Warranty 2.0)
for indoor access points, limited 24x7 telephone support is available from HP for the first 3 years; limited electronic and
business hours telephone support is available from HP for the entire warranty period; to reach our support centers, refer to
www.hp.com/networking/contact-support ; for details on the duration of support provided with your product purchase, refer to
www.hp.com/networking/warrantysummary
1-year Warranty 2.0
for outdoor access points, advance hardware replacement with next-business-day delivery (available in most countries)
Electronic and telephone support (for Warranty 2.0)
for outdoor access points, limited electronic and 24x7 telephone support is available from HP for the entire warranty period; to
reach our support centers, refer to www.hp.com/networking/contact-support ; for details on the duration of support provided
with your product purchase, refer to www.hp.com/networking/warrantysummary
Software releases
to find software for your product, refer to www.hp.com/networking/support ; for details on the software releases available with
your product purchase, refer to www.hp.com/networking/warrantysummary
†HP warranty includes repair or replacement of hardware for as long as you own the product, with next business day advance
replacement (available in most countries). The disk drive included with HP AllianceOne Advanced Services and Services zl Modules, HP
Threat Management Services zl Module, HP AllianceOne Extended zl Module with Riverbed Steelhead, HP MSM765zl Mobility Controller
and HP Survivable Branch Communication zl Module powered by Microsoft® Lync has a five-year hardware warranty. For details, refer
to the Software license and hardware warranty statements at www.hp.com/networking/warranty .
QuickSpecs
HP MSM-802.11n Dual Radio Access Point Series
Overview
DA - 13994 North America — Version 10 — December 9, 2013 Page 4

Build To Order:
BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-
Shippable solution.
MSM430 Dual Radio 802.11n AP (AM) J9650B
1 RJ-45 autosensing 10/100/1000 port
HP MSM430 Dual Radio 802.11n Access Point (WW) J9651A
1 RJ-45 autosensing 10/100/1000 port See Configuration
Note:2
MSM430 Dual Radio 802.11n AP (WW) J9651B
1 RJ-45 autosensing 10/100/1000 port See Configuration
Note:2
HP MSM430 Dual Radio 802.11n Access Point (JP) J9652A
1 RJ-45 autosensing 10/100/1000 port
MSM430 Dual Radio 802.11n AP (JP) J9652B
1 RJ-45 autosensing 10/100/1000 port
HP MSM430 Dual Radio 802.11n Access Point (IL) J9653A
1 RJ-45 autosensing 10/100/1000 port See Configuration
Note:3
MSM430 Dual Radio 802.11n AP (IL) J9653B
1 RJ-45 autosensing 10/100/1000 port See Configuration
Note:3
HP MSM460 Dual Radio 802.11n Access Point (AM) J9590A
1 RJ-45 autosensing 10/100/1000 port
MSM460 Dual Radio 802.11n AP (AM) J9590B
1 RJ-45 autosensing 10/100/1000 port
HP MSM460 Dual Radio 802.11n Access Point (WW) J9591A
1 RJ-45 autosensing 10/100/1000 port See Configuration
Note:2
MSM460 Dual Radio 802.11n AP (WW) J9591B
1 RJ-45 autosensing 10/100/1000 port See Configuration
Note:2
HP MSM460 Dual Radio 802.11n Access Point (JP) J9589A
QuickSpecs
HP MSM-802.11n Dual Radio Access Point Series
Configuration
DA - 13994 North America — Version 10 — December 9, 2013 Page 5

1 RJ-45 autosensing 10/100/1000 port
MSM460 Dual Radio 802.11n AP (JP) J9589B
1 RJ-45 autosensing 10/100/1000 port
HP MSM460 Dual Radio 802.11n Access Point (IL) J9618A
1 RJ-45 autosensing 10/100/1000 port See Configuration
Note:3
MSM460 Dual Radio 802.11n AP (IL) J9618B
1 RJ-45 autosensing 10/100/1000 port See Configuration
Note:3
HP MSM466 Dual Radio 802.11n Access Point (AM) J9621A
1 RJ-45 autosensing 10/100/1000 port
MSM466 Dual Radio 802.11n AP (AM) J9621B
1 RJ-45 autosensing 10/100/1000 port
HP MSM466 Dual Radio 802.11n Access Point (WW) J9622A
1 RJ-45 autosensing 10/100/1000 port See Configuration
Note:2
MSM466 Dual Radio 802.11n AP (WW) J9622B
1 RJ-45 autosensing 10/100/1000 port See Configuration
Note:2
HP MSM466 Dual Radio 802.11n Access Point (JP) J9620A
1 RJ-45 autosensing 10/100/1000 port
MSM466 Dual Radio 802.11n AP (JP) J9620B
1 RJ-45 autosensing 10/100/1000 port
HP MSM466 Dual Radio 802.11n Access Point (IL) J9619A
1 RJ-45 autosensing 10/100/1000 port See Configuration
Note:3
MSM466 Dual Radio 802.11n AP (IL) J9619B
1 RJ-45 autosensing 10/100/1000 port See Configuration
Note:3
HP MSM466-R Dual Radio Outdoor 802.11n Access Point (AM) J9715A
1 RJ-45 autosensing 10/100/1000 port
HP MSM466-R Dual Radio Outdoor 802.11n Access Point (WW) J9716A
QuickSpecs
HP MSM-802.11n Dual Radio Access Point Series
Configuration
DA - 13994 North America — Version 10 — December 9, 2013 Page 6

1 RJ-45 autosensing 10/100/1000 port See Configuration
Note:2
HP MSM466-R Dual Radio Outdoor 802.11n Access Point (JP) J9717A
1 RJ-45 autosensing 10/100/1000 port
HP MSM466-R Dual Radio Outdoor 802.11n Access Point (IL) J9718A
1 RJ-45 autosensing 10/100/1000 port See Configuration
Note:3
Configuration Rules:
Note 2 Not available Israel. (Warning in Clic only)
Note 3 Only available in Israel. (Warning in Clic only)
Access Point Options
External Power
Supplies
HP 1-port Power Injector J9407B
External Antenna HP Indoor Omnidirectional Dual Band 2.5/6dBi MIMO 6
Element Antenna
J9659A
See Configuration
Note:1
HP Indoor Omnidirectional Dual Band 3/4dBi MIMO 3
Element Antenna
J9171A
See Configuration
Note:1
HP Indoor-Outdoor Narrow Sector Dual Band 8/10dBi
MIMO 3 Element Antenna
J9169A
See Configuration
Note:1, 4
HP Indoor-Outdoor Point-to-Point Dual Band 10/13dBi
MIMO 3 Element Antenna
J9170A
See Configuration
Note:1, 4
HP Antenna Lightning Arrester J8996A
See Configuration
Note:1
QuickSpecs
HP MSM-802.11n Dual Radio Access Point Series
Configuration
DA - 13994 North America — Version 10 — December 9, 2013 Page 7

HP Outdoor Omnidirectional 6dBi at 2.4GHz MIMO 3
Element Antenna
J9719A
See Configuration
Note:2, 3
HP Outdoor Omnidirectional 8dBi at 5GHz MIMO 3
Element Antenna
J9720A
See Configuration
Note:2, 3
Configuration Rules:
Note 1 This Antenna is supported on the following Access Points:
HP MSM466 Dual Radio 802.11n Access Point (JP) J9620A
MSM466 Dual Radio 802.11n AP (JP) J9620B
HP MSM466 Dual Radio 802.11n Access Point (AM) J9621A
MSM466 Dual Radio 802.11n AP (AM) J9621B
HP MSM466 Dual Radio 802.11n Access Point (WW) J9622A
MSM466 Dual Radio 802.11n AP (WW) J9622B
HP MSM466-R Dual Radio Outdoor 802.11n Access Point (AM) J9715A
HP MSM466-R Dual Radio Outdoor 802.11n Access Point (WW) J9716A
HP MSM466-R Dual Radio Outdoor 802.11n Access Point (JP) J9717A
HP MSM466-R Dual Radio Outdoor 802.11n Access Point (IL) J9718A
HP MSM466 Dual Radio 802.11n Access Point (IL) J9619A
MSM466 Dual Radio 802.11n AP (IL) J9619B
Note 2 This Antenna is supported on the following Access Points:
HP MSM466-R Dual Radio Outdoor 802.11n Access Point (AM) J9715A
HP MSM466-R Dual Radio Outdoor 802.11n Access Point (WW) J9716A
HP MSM466-R Dual Radio Outdoor 802.11n Access Point (JP) J9717A
HP MSM466-R Dual Radio Outdoor 802.11n Access Point (IL) J9718A
Note 3 If this Antenna is select then THREE of the following Lightning Arresters per sku ordered is
required:
HP Antenna Lightning Arrester J8996A
Note 4 If this Antenna is select then THREE of the following Lightning Arresters per sku ordered is
required for Outdoor use:
HP Antenna Lightning Arrester J8996A
Remarks: If you plan on connecting an outdoor antenna to the unit make sure that proper lightning surge
protection and grounding precautions are taken according to local electrical code.
QuickSpecs
HP MSM-802.11n Dual Radio Access Point Series
Configuration
DA - 13994 North America — Version 10 — December 9, 2013 Page 8

HP MSM430 Dual Radio
802.11n Access Point (AM)
(J9650A)
HP MSM430 Dual Radio
802.11n Access Point
(WW) (J9651A)
HP MSM430 Dual Radio
802.11n Access Point (JP)
(J9652A)
HP MSM430 Dual Radio
802.11n Access Point (IL)
(J9653A)
HP MSM430 Dual Radio
802.11n Access Point
(TAA) (J9654A)
Ports 1 RJ-45 autosensing 10/100/1000 port; Duplex: 10BASE-T/100BASE-TX: half
or full; 1000BASE-T: full only (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
1 RJ-45 serial console port
AP characteristics Radios (built-in) 802.11 a/n, b/g
Radio operation modes Client access, Local mesh, Packet capture
AP operation modes Autonomous and controlled
Wi-Fi Alliance
Certification *
a/b/g/n Wi-Fi Certified
Antenna (3) 4 dBi 2.4 GHz and (3) 7 dBi 5 GHz
omnidirectional ant
Number of internal
antennas
6
Physical characteristics Dimensions 8(w) x 6.75(d) x 2.62(h) in (20.32 x 17.15 x 6.65
cm)
Weight 2.25 lb (1.02 kg) mounting bracket
Memory and processor Dual core @ 800 MHz, 128 MB flash, 256 MB SDRAM
Mounting and enclosure Indoor, plenum rated;Includes two ceiling mounting clips
Environment Operating temperature 32°F to 122°F (0°C to 50°C)
Operating relative
humidity
5% to 95%, noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
5% to 95%, noncondensing
Electrical characteristics Description IEEE 802.3af PoE compliant for Gigabit Ethernet
Maximum power rating 12.9 W
Frequency band and
operating channels
Americas 2.412 - 2.462 GHz (1 - 11 channels)
5.180 - 5.320 GHz (36 - 64 channels)
5.500 - 5.700 GHz (100 - 140 (excluding 5600-
5670 MHz) channels)
5.745 - 5.825 GHz (149 - 165 channels)
European Union 2.412 - 2.472 GHz (1 - 13 channels)
5.180 - 5.320 GHz (36 - 64 channels)
5.500 - 5.700 GHz (100 - 140 (excluding 5600-
5650 MHz) channels)
Rest of World (Actual
channels designated by
selecting
country in UI)
2.412 - 2.472 GHz (1 - 13 channels)
5.180 - 5.320 GHz (36 - 64 channels)
5.500 - 5.700 GHz (100 - 140 channels)
5.745 - 5.825 GHz (149 - 165 channels)
QuickSpecs
HP MSM-802.11n Dual Radio Access Point Series
Technical Specifications
DA - 13994 North America — Version 10 — December 9, 2013 Page 9

Taiwan 2.412 - 2.462 GHz (1 - 11 channels)
5.280 - 5.320 GHz (56 - 64 channels)
5.500 - 5.700 GHz (100 - 140 (excluding 5600-
5670 MHz) channels)
Japan 2.412 - 2.472 GHz (1 - 13 channels)
5.180 - 5.320 GHz (36 - 64 channels)
5.500 - 5.700 GHz (100 - 140 channels)
Israel 2.412 - 2.472 GHz (1 - 13 channels)
5.180 - 5.320 GHz (36 - 64 channels)
Radio FCC Part 15.247; FCC Part 15.407 (US); RSS-210 (Canada); EN 300 328; ARIB
STD-T66; IDA Registration (Singapore); RCR STD-33; ARIB STD-T71 (Japan); EN
301 893 (EU); KCC approval (Korea)
Safety UL 2043; UL 60950-1; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1
Emissions EN 55022 Class B; EN 301 489-1; EN 301 489-17; ICES-003 Class B; FCC Part
15, Class B
Medical EN60601-1-2
RF Exposure FCC Bulletin OET-65C; RSS-102; CFR 47, Part 2, Subpart J; ANSI/IEEE C95.1
(99); Ministry of Health Safety Code 6; Australian Radiation Protection Std.
Features Dual radio: IEEE 802.11a/n for high-throughput applications and IEEE
802.11b/g/n for legacy support and high-speed applications
- Integrated antennas for both IEEE radios, supporting two spatial streams
and 3x3 MIMO
- Six embedded antennas
- Both radios operate at full power and full performance on IEEE 802.3af
PoE/Gigabit Ethernet
Notes The MSM430 and MSM460 access point power information listed includes the
embedded antenna. Review the HP documentation for your AP to understand
the maximum output setting for your AP based on your country's regulations.
Two spatial stream AP, supporting 300 Mb/s per radio.
Maximum transmit power varies by country.
Regulatory model number: MRLBB-1001
Services 3-year, 4-hour onsite, 13x5 coverage for hardware (UN683E)
3-year, 4-hour onsite, 13x5 coverage for hardware (UY966E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UY967E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UN684E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support
and SW updates (UY968E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support
and SW updates (UN686E)
3-year, 24x7 SW phone support, software updates (UY969E)
3-year, 24x7 SW phone support, software updates (UN685E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR624E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR625E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7
software phone support (HR626E)
4-year, 4-hour onsite, 13x5 coverage for hardware (US013E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UY976E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UY977E)
QuickSpecs
HP MSM-802.11n Dual Radio Access Point Series
Technical Specifications
DA - 13994 North America — Version 10 — December 9, 2013 Page 10