HPRT MPT-II User manual

MPT-II
User Manual
Xiamen Hanin Electronic Technology Co.,Ltd.
ADD: Room 305A,Angye Building, Pioneering Park,
Torch High-tech Zone, Xiamen, China 361009
Tel: [phone]
Fax: [phone]
Web: www.hprt.com

REVISION RECORDS
REV.
DATE
DESCRIPTION
DRAWN
CHECKED
APPROVED
1.0
2014.08.06
Preliminary
Chen Weihua
Yang Kaiqu
Ren Xiaowei
1.1
2014.12.05
1.Updated the driver
2.Added the pin assignment of
interface
Cui Xiao
Yang Kaiqu
Ren Xiaowei
1.2
2015.12.30
1.Modify the printing speed;(P5)
2.Modify the font of character
set;(P5)
3.Modify the memory of
bitmap;(P5)
4.Modify the weight of
printer;(P5)
5.Add Chapter 6 Clean
Printer.(P12)
Lin Yun
Yang Kaiqu
Ren Xiaowei

CONTENTS
PRECAUTIONS................................................................................................................... 1
1. Safety Precautions................................................................................................ 1
2. Operation Precautions..........................................................................................1
3. Storage Precautions.............................................................................................. 1
4. Battery Safety Precautions................................................................................... 2
CHAPTER 1 BRIEF INTRODUCTION................................................................................... 4
1.1 Appearance......................................................................................................... 4
1.2 Accessories..........................................................................................................4
CHAPTER 2 SPECIFICATIONS............................................................................................. 5
CHAPTER 3 OPERATION METHODS...................................................................................6
3.1 Preparation Before Using................................................................................... 6
3.1.1 Li-ion Battery Installation........................................................................ 6
3.1.2 Paper Loading.......................................................................................... 6
3.2 Basic Function.....................................................................................................7
3.2.1 Power On................................................................................................. 7
3.2.2 Power Off................................................................................................. 7
3.2.3 Self-test....................................................................................................7
3.2.4 Paper Feeding.......................................................................................... 7
3.2.5 Standby/Sleep..........................................................................................7
3.2.6 No Paper Alarming...................................................................................8
3.2.7 Battery Charging...................................................................................... 8
3.3 Bluetooth............................................................................................................ 9
3.4 LED Indicator and Buzzer Definition.................................................................10
3.5 Software Tools of MPT-II...................................................................................10
CHAPTER 5 OTHER INFORMATION................................................................................. 11
5.1 Printer Technical Manual..................................................................................11
5.2 Preprinted Black Mark Specification................................................................ 11
CHAPTER 6 CLEAN PRINTER............................................................................................ 12
6.1 Cleaning Head...................................................................................................12
6.2 Cleaning Sensor, Platen and Paper Path...........................................................12

MPT-II User Manual
Rev.1.2 www.prttech.com
1
PRECAUTIONS
1. Safety Precautions
1) Be sure to use the specified battery and power supply provided by our company.
2) Connection to an improper power supply may cause fire, explosion or damage to
the printer.
3) Don’t put the battery into the fire or water, don’t disassemble or modify the
battery, don’t be short circuit, otherwise may result in injury or fire even
explosion.
4) If the printer would not be used for a long time, be sure to take off the battery,
otherwise the battery may leak liquid which is corrosive, if improper operation
causes battery leak, and the liquid is spattered on the skin or clothes, please wash
it with water, if spattered in the eyes, please rinse them with water thoroughly
and see a doctor.
5) Please do not open the paper case cover when it is printing or just when printing
is over, do not touch the print head with hand or body, overheat may cause scald.
2. Operation Precautions
1) Water or other liquid should not spill into the printer, also the printer should not
be appeared in the rain, or else may cause printer damage.
2) Please do not open the paper case cover when it is printing, otherwise the printer
may work improperly.
3) If print with serial interface, should not unplug the interface cable in the course of
printing, or else some printing data may be lost.
4) When print with Bluetooth interface, the communication distance should be
within 10 meters, otherwise the printer doesn’t print or prints rubbish codes.
5) Too high（50℃）or too low（-5℃） temperature and too high (80％)or too
low (25％)relative humidity both effect the print quality.
6) The print paper in poor quality or stored for too long time also may reduce the
print quality even damage the printer.
3. Storage Precautions
1) The printer should be placed in such an environment that the temperature is
between-40℃and 60℃, and the relative humidity is ≤93%（40℃）.
2) If the printer will be stored for a long time, please be sure to take out the battery,
otherwise may damage the battery and printer.
3) Normal thermal paper can’t be kept too long, if you need to keep the receipt for a
long period, please choose long term effective thermal paper.

MPT-II User Manual
Rev.1.2 www.hprt.com
2
4) The print paper should be keep away from high temperature environment and
point-blank sunshine.
4. Battery Safety Precautions
1) Be sure to carefully read the user manual before using the product.
2) Ignore the following instructions may cause battery overheating, fire, explosion,
damage and/or performance, and reduced product life.
3) Do not allow water, sea water from entering or leaking into the battery inside. If
the batteries internal safety device burn, when charging it, it may produce any
abnormal current and/or voltage, and cause any abnormal chemical reaction,
then may cause the battery overheating, fire and/or explosion.
4) Do not use or place the battery nearby the stove or other high temperature
places. Excessive heat maybe damage the resin shell and/or the insulation
materials, thereby cause short-circuit inside the battery, then the battery
may be caused overheating, burning and / or explosion.
5) When charging, use a specified charger. Other conditions (high temperature, high
pressure/high current, using the modified battery charger, etc.) excluded here
may result in over-charging the battery and abnormal current and/or voltage,
cause abnormal chemical reaction, and may cause the battery overheat, light
and/or explosion.
6) Do not make the battery contact with the power outlet and/or car cigarette
lighter socket. This may cause high pressure and excessive current, and lead to
the battery overheat, burning and/or explosion.
7) Do not heat the battery or put the battery into fire. This may melt insulation
material and/or damage safety devices or safety equipment, then ignite
electrolytic solution, and cause the battery overheat, burning and/or explosion.
8) Do not use the battery with contrary(+) and(-) location. In the charging process,
this will cause the reverse charging and may cause abnormal chemical reaction.
During use, may appear unpredictable current exception, and cause the battery
overheat, ignite, and/or explosion.
9) Battery clearly marks with positive and negative. When connect the battery with
the charger and/or printer, be sure to verify the correct battery orientation.
Reverse insertion will cause the reverse charging and may cause abnormal
chemical reaction, and then may cause the battery overheat, ignite, and/or
explosion.
10) Do not make the battery(+)and(-)contact with any metal. Also, do not carry along
or store batteries with metal objects, such as necklaces, hair clips and so on.
Battery internal short circuit may cause excessive current, and lead to the battery
overheat, ignite, and/or explosion and the adjacent metal objects (necklaces,

MPT-II User Manual
Rev.1.8 www.prttech.com
3
hairpins, etc.) may be overheating.
11) Do not throw or heavy attack the battery. If internal safety device of the batteries
burn, the battery charging may cause any abnormal current and/or voltage, and
abnormal chemical reaction, and lead to the battery overheat, ignite, and/or
explosion.

MPT-II User Manual
Rev.1.2 www.hprt.com
4
CHAPTER 1 BRIEF INTRODUCTION
1.1 Appearance
1.2 Accessories
Standard accessories
Optional accessories

MPT-II User Manual
Rev.1.2 www.hprt.com
5
CHAPTER 2 SPECIFICATIONS
Item
Parameter
Printing
Printing method
Thermal line printing
Resolution
203dpi, 8dots/mm
Printing speed
30~50mm/s
Valid printing width
48mm
Interface
Bluetooth,RS-232,USB(optional)
Power saving
Sleep mode
YES
Character Set
Font
ASCII: 12×24
GBK: 24×24
Barcode Symbologies
1D
UPC-A, UPC-E, EAN8, EAN13, CODE39, ITF, CODEBAR,
CODE128, CODE93
Graphics
Support bitmap printing with different density and user
defined bitmap printing (Max. 40K for per bitmap, and
Max. 80K for total)
Detection
Sensors
Paper out detection
LED indicator
Power indicator
Red
Error indicator
Blue
Power supply
Power supply
USB charging
Battery
2000mAh/3.7V rechargeable Li-ion battery
Paper
Paper type
Thermal paper
Recommended paper
FD210,PD150R,PD160R
(OJI Paper CO.,LTD.)
Paper width
58mm
Paper thickness
≤0.1mm
Paper roller diameter
≤40mm
Paper loading
Easy loading mechanism
Physical characteristics
Working condition
-5°C~50°C , 25%~80%RH
Storage condition
-40°C~60°C,≤93%RH（40℃）
Dimension
102.5*75*45mm
Weight
269g (without paper roll)
Reliability
TPH
50km(not more than 12.5% printing density)/100 million
pulses
Software
Emulation
ESC/POS
Driver
Windows XP/Vista/Win7/Win8
NOTE:
Pls. use the recommended thermal paper or same quality paper, otherwise it will
influence the printing quality and decrease the thermal print head life.

MPT-II User Manual
Rev.1.2 www.hprt.com
6
CHAPTER 3 OPERATION METHODS
3.1 Preparation Before Using
3.1.1 Li-ion Battery Installation
1) Refer to the picture, put the battery in the battery slot, pls pay attention to the
correct positive and negative.
2) Close the battery case.
3.1.2 Paper Loading
Operation Methods:
1) Use two fingers to press the place showed in the picture and open the top cover.
2) Put the paper into the paper case, pay attention to the direction of the paper. If
loaded reversely, it won’t print.
3) Pull paper out of paper case.
4) Make sure paper in the center then close top cover.

MPT-II User Manual
Rev.1.2 www.hprt.com
7
3.2 Basic Function
3.2.1 Power On
The printer is power on by pressing the 【POWER 】button lasting for about 2
seconds, and the power indicator is bright in red color.
Notice: When the battery is almost exhausted, the status indicator blinks in blue
color.In this case, you must charge the battery. See more information about the
method of charging the battery in 3.2.7 Battery charging.
3.2.2 Power Off
The printer is power off after holding down the 【POWER 】button for about 2
seconds. All the indicators are off when the printer is off.
3.2.3 Self-test
The self-test indicate the printer’s current settings, status and whether the printer
has any problems. Hold down the 【FEED】button while press 【POWER 】button
about 2 seconds, the self-test begins.
The printer is ready to receive data as soon as it completes the self-test.
3.2.4 Paper Feeding
Users could use 【FEED 】button to feed paper manually. Printer will stop feeding
when reaching max feeding distance. Max feeding distance could be set by the PC
software “MPTTools”.Please ask your distributor for more technical information of
“MPTTools”.
3.2.5 Standby/Sleep
MPT-II has auto-sleep and auto-wake up function to save the battery power.
When the printer is power on, but during the pre-set standby time, no data is sent to
the printer, no operation is done to the printer , it will enter auto standby mode.When
the printer enters auto standby mode, the power indicator will show in red.
When the printer enters auto standby mode, the power consumption will decrease a
lot, but have no influence to the printer working. The printer will auto wake up when
receiving printing data without any extra operation.
When the printers enters auto standby mode, and during the pre-set auto sleep time,
it receives no data and has no operation, the printer will auto turn off with all the
light off. The users have to turn on the printer again if they want to use the printer.
The users can use the MPTTOOLS to set the printer standby time and sleep time.