Huawei C223s User manual

C223s
CDMA 1X Digital Mobile Phone
User Guide
Copyright © 2007 Huawei Technologies Co.,Ltd. All rights reserved.
and other trademarks are the property of Huawei Technologies Co., Ltd. All other trademarks
and trade names mentioned in this manual are the property of their respective holders. The information
in this manual is subject to change without notice. Every effort has been made in the preparation of this
manual to ensure accuracy of the contents, but all statements, information, and recommendations in
this manual do not constitute the warranty of any kind, express or implied. For any question of this
document, call the service hotline for details.
Huawei Technologies Co.,Ltd.
Huawei Industrial Base, Bantian, Longgang, Shenzhen 518129, People's Republic of China
Tel: [phone] Global hotline: [phone]
Email: [email protected] Website: www.huawei.com

1
1 Getting to Know Your Phone
Your Phone
1
2
4
3
67
11
8
910
5
12

2
Note zThere are two C223s models. One has a removable
user identity module (R-UIM) and the other does
not.
zThis manual describes the C223s with the R-UIM. If
a function is marked with "'", it indicates that this
function is only available in the C223s with the
R-UIM. But the remaining functions are supported
by both the C223s models.
Appearance Descriptions
1 Earpiece –
2 Screen –
Press to write message.
Press to view the calendar.
Press to access the inbox.
3 Navigation keys
Press to view the name list.
4 Soft keys zWhen the phone is closed, before
it is in the battery saving mode,
press and to
enable or disable the keyguard.
zSelect the option displayed on the
lower corner of the screen.
5 OK key zConfirm a selection.
zAccess the FM screen.
zAccess the Call Records screen.
6 Dialing key
zMake or answer a call.
7 End/Power key zPower on or off the phone (by
pressing and holding it).

3
zEnd or reject a call.
zReturn the Idle screen.
zPress and hold 1 to access Voice
Mail.
zPress and hold 2–9to speed dial a
phone number.
8 Number keys
zPress and hold 0 access the FM.
9 * key Enable or disable the vibration mode
(by pressing and holding it).
10 # key Enable the phone lock (by pressing
and holding it).
11 Speaker –
12 Charger interface –
Screen Icons
Icon Meaning Icon Description
Signal strength Silence mode
Phone lock Vibration
New voice mail Alarm clock
Non-service Call privacy
New Message Battery level
Urgent message Roaming
High urgent message Calling
Calling in roaming Headset
CDMA 1X

4
2 Menu Tree
Messages Phonebook Call Records
1 Write Message
2 Inbox
3 Outbox
4 Draftbox
5 Voice Mail
6 Delete All
7 Settings
1 Search
2 Add New
3 Groups
4 Speed Dial
5 Delete All
6 'Copy All
7Options
1 Missed Calls
2 Answered Calls
3 Dialed Calls
4 Delete All
5 Call Duration
Extras Sound Settings
1 Alarms
2 Calendar
3 Calculator
4 Stopwatch
5 Time Zone
6 Games
7 FM
1 Volume
2 Alert Mode
3 Ring Tone
4 Alarm Tone
5 SMS Receive Tone
6 SMS Send Tone
7 Other Tones
1 Display
2 Time
3 Call
4 Language
5 Security
6 Factory Restore
7 Keyguard

5
3 Getting Started
Installing the Battery
To install the battery, do as follows.
1
2
3
①②③
Removing the Battery
To remove the battery, do as follows.
1
2
①②
"'"Installing/Removing the UIM Card
After removing the battery, do as follows to install or remove the
UIM card.

6
Charging the Battery
1. Connect the charger to the charger interface at the bottom of
your phone. Make sure that the arrow on the charger
connector faces the front side of the phone.
2. Connect the charger to a power socket.
3. The phone starts charging. The screen displays the charging
animation.
4. When the animation becomes static, disconnect the charger
from the power socket.
5. Disconnect the charger from the phone. Press the gray
buttons on both sides of the charger connector, and then pull
it out from the charger interface.
Accessing a Menu
1. In the standby mode, press to display the main menu.
2. Press to select a function menu.
3. Press to display the selected menu.
4. Press to select a submenu and press to display
it.
5. Press to return to the previous menu or exit the
function menu.
6. Press to return to the standby screen.
Making a Call
1. In the standby mode, press the number keys to enter a phone
number.
2. Press to dial the number.

7
3. Press to end the call or cancel the dialing.
zWhen the phone is locked, you need to unlock the
phone first.
zPress continuously to enter *, P, Tor +.
Receiving a Call
When there is an incoming call, you can do as follows:
zPress or to answer the call.
zPress or to reject the call.
zWhen the any key function is enabled, press any key to
answer the call (except , Navigation keys and ).
zWhen the auto-answer function is enabled, the call is
answered automatically in the preset duration.
During a call, press to adjust the earpiece volume
for a better calling effect.
Phone Lock
The phone lock protects your phone from unauthorized use. The
default phone lock code is "0000".
4 Text Input
Text Input Modes
The phone supports the following text input modes:
zAlphabetical text input mode:

8
¾ENABC\ ENAbc \ ENabc: Upper case/initial
capital/lower case English alphabetical text input
mode
zPredictive input mode:
¾\ \ : Upper case/initial
capital/lower case predictive English input mode
zNumbers input mode:
¾123: "123" input mode
zSymbol input mode:
¾Enter the English Symbols.
Basic Operations
In the text editing mode, you can choose the following options:
zPress to switch the text input modes.
zPress and hold to switch between uppercase initial
capital and lowercase.
zPress to display the symbol list.
zPress and hold to switch between alphabetical text
input mode and predictive input mode.
zPress to delete the letter on the left of the cursor.
zPress and hold to clear the letter.
zIn any input mode (except the "123"), press 0to enter a
space.
zWhen selecting a letter or word, press to confirm the
selection followed by the cursor on the left/right.
Alphabetical Text Input
Press the key labeled with the desired letter once to enter the
first letter on the key, twice to enter the second letter on the key,