Huawei C2800 User manual

C2800
CDMA 1X Mobile Phone
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other
trademarks and trade names mentioned in this document are the property of their respective holders.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute the warranty of any kind, express or implied.
Huawei Technologies Co.,Ltd.
Address: Huawei Industrial Base, Bantian, Longgang, Shenzhen 518129, People's Republic of China
Tel: [phone] Global Hotline: [phone]
E-mail: mobile@huawei. com Website: www.huawei.com

1
Your Phone
OK
Earpiece
Number Keys
Navigation Keys
Left Soft Key
Keyguard Key
Right Soft Key
End /Power Key
Vibrate Only Key
Talk /Send Key
Speaker
OK Key
Charger Interface
/Headset Jack
Screen
/Data Cable Connector
Keys and Functions
Press… To…
zView the call log in the standby mode.
zMake or answer a call.
zPower on or off the phone (by pressing and holding
it).
zEnd a call or reject an incoming call.
zReturn to the home screen.

2
Press… To…
zDisplay the Magic interface in the standby mode.
zConfirm a selection.
Select the option displayed on the lower left corner of
the screen.
Select the option displayed on the lower right corner of
the screen.
zDisplay the Profiles interface ( ), the Messages
interface ( ), the Create Message interface (by
pressing and holding ), the Scheduler interface
(), and the Alarms interface ( ) in the
standby mode.
zIncrease the volume ( ) or decrease the volume
() during a call.
–
zEnter numbers, letters, and symbols.
zAccess the voice mailbox in the standby mode (by
pressing and holding the 1key).
zSpeed-dial phone numbers in the standby mode (by
pressing and holding the 2–9 keys).
zSelect a submenu item labeled with the
corresponding number.

3
Press… To…
zEnter the * symbol.
zEnable or disable the meeting profile (by pressing
and holding it).
zProvide different functions according to the phone
features being used.
zEnter the # symbol.
zLock the keypad in the standby mode (by pressing
and holding it).
zProvide different functions according to the phone
features being used.
Screen Icons
Icon Description Icon Description
Network signal strength Battery power level
No network signal Data service
CDMA 1X network Alarm clock on
Domestic roaming General profile
Overseas roaming Silence profile
Calling Meeting profile
Call privacy enabled Outdoor profile
Keypad locked My profile
Message received Open Handsfree
Memory for messages full Close Handsfree
Urgent message received Voice mail received

4
Menu Tree
1AllCalls
2MissedCalls
3ReceivedCalls
4Dialed Calls
5CallMemo
6 Call Durati on
1Create Message
2 Inbox
3 Outbox
4Drafts
5VoiceMail
6Templates
7Recipients List
8MyFolder
9Settings
0 Delete All
Tools
1Automatic Tuning
2Manual Tuning
1 General
2 Silence
3Meeting
4 Outdoor
5MyProfile1
6MyProfile2
1Display Settings
2Date&Time
3 Call Settings
4Phone Settings
5Security Settings
6Restore Fatory
Settings
1Search
2Search by
3AddNew
4Groups
5Speed Dial
6My Number
7Management
1Recorder
2Alarms
3Schedulers
4Calculator
5Stopwatch
6World Clock
7 Gallery
Profiles
Contacts
Settings
Call History
Brew
Messages Tools
Profiles
Contacts
Settings
Call Log
Radio
Messages
Location
1UTK
2 BAM
BrewBrew
3 Inching Tuning
4 Set Frequency

5
Installing the UIM Card and Battery
Contact the network operator whether a UIM card is needed.
Make sure that the golden area on the UIM card faces downwards
and the cut-off edge is correctly aligned with the card holder.
Removing the Battery and UIM Card
Make sure that your phone is powered off.
Charging the Battery
1. Connect the charger to the charger interface at the bottom of your
phone.
Make sure that the side labeled "TOP" of the charger faces the
front side of the phone.
2. Connect the charger to an alternating current (AC) power socket.
3. During the charging, the charging icon is displayed in the
animated status.
When the charging icon becomes static, the phone is fully
charged.

6
4. Disconnect the charger from the AC power socket.
5. Press the gray buttons on both sides of the charger connector
inwards to disconnect the charger from the phone.
Using the Function Menu
1. In the standby mode, press to display the Menu interface.
2. Press to scroll to a menu item.
3. Press (Select) or to display the menu.
4. Do the following to display the submenu:
¾Press to scroll to a submenu item and press
(Select) or to display the submenu.
¾Press the number key corresponding to the number of a
submenu to display it.
5. Press (Back) to return to the previous menu or quit the
function menu.
Alternatively, press to return to the home screen.
Making a Call
1. In the standby mode, enter a phone number.
zTo make an international call, press twice to enter the
international long distance code of "+". Then enter the number to
be dialled, in the format of "country code + region code + phone
number".
zTo call a number with an extension, press third to insert
"P" or press fourth to insert "T" between the phone
number and the extension number.
2. Press to dial the number.
3. Press to end the call.

7
Note zWhen the phone is locked, enter the lock code to unlock
the phone first; otherwise, you can make only emergency
calls or answer calls.
zIn the standby mode, press to view the call log.
Select a record and press to dial.
zSelect a contact from the phonebook and press to
dial.
Answering a Call
When there is an incoming call, press , (Answer), or
to answer it, or press to reject it.
zIf the any key answer function is enabled, press any key (except
or ) to answer an incoming call.
zIf the headset auto answer function is enabled, and the headset is
connected to the phone, the incoming call is answered
automatically.
Note If the headset is connected to the phone, you can press the
button on the headset cable to answer or end a call.
Phone Lock
The phone lock protects your phone from unauthorized use. The
default phone lock code is 000000. You can change it into any
numeric string of 4 to 8 digits.
If the phone lock is enabled, you need to enter the correct phone lock
code when the phone is powered on.
PIN and PUK
The personal identity number (PIN) protects your UIM card from
unauthorized use. The PIN unlocking key (PUK) can unblock the
blocked PIN. Both PIN and PUK are delivered with the UIM card.
For details, contact your service provider.

8
If you enter wrong PINs three times consecutively, the phone asks
you to enter the PUK code.
If you enter wrong PUKs ten times, the UIM card is invalidated
permanently. Contact your service provider for a new card.
Locking the Keypad
In the standby mode, press and hold to lock the keypad.
When the keypad is locked, press to answer incoming calls or
make emergency calls.
You can press and to unlock the keypad.
When the keyguard function is enabled, if there is no operation on
the phone for a preset period, the keypad is locked automatically.
Changing the Text Input Modes
The indicator of the current text input mode is displayed on the
screen. When no letters are selected in the input field, press to
change the input mode. When letters are selected, press to
change the letters between lowercase and uppercase.
Note zIn the editing mode, press (Clear) once to delete
the letter on the left of the cursor. Press and hold
(Clear) to delete all the letters at a time.
zIn the "En" input mode, press to enter a space. In
the "Abc" input mode, press once to enter a
space and twice to enter 0.
zIn the "Abc" , "abc" or "ABC" input mode, press
repeatedly to select and enter the commonly-used
punctuations. In the "En" input mode, press
repeatedly to enter a full stop or smiley.
Entering English (En)
In the "En" input mode, do the following to enter the English letters:

9
1. Press each desired key once corresponding to the sequence of the
letters. Then the phone displays the commonly-used words
according to the numeric sequence of key presses.
2. Press to scroll to the desired word.
3. Press to select the word.
Press to enter the word and a space.
Entering English (Abc/abc/ABC)
In the "Abc" , "abc" or "ABC" input mode, press a key labeled with
the desired letters once to enter the first letter on the key, twice to
enter the second letter on the key, and so on.
Note If the letter you want to enter is on the same key as the
previous one, enter the latter only after the cursor appears
again or after you press to move the cursor to the
next space.
Entering Numbers
1. In the "123" input mode, press a key labeled with the desired
number.
2. In the "Abc" , "abc" or "ABC" input mode, press a key
continuously or press and hold it until the desired number appears
on the screen.
3. In the "En" input mode, press a key and then press until
the desired number appears on the screen.