Huawei C2828 User manual

C2828
CDMA 1X Mobile Phone
USER GUIDE

Please refer color and shape to product.
Huawei reserves the right to make changes or improvements to any of the products without prior notice.
Huawei Technologies Co., Ltd.
Address: Huawei Industrial Base, Bantian, Longgang, Shenzhen 518129, People’s Republic of China
Tel: [phone] Global Hotline: [phone]
E-mail: [email protected] Website: www.huawei.com

Copyright © Huawei Technologies Co., Ltd. 2010.
All rights reserved.
No part of this document may be reproduced or transmitted in
any form or by any means without prior written consent of
Huawei Technologies Co., Ltd.
The product described in this manual may include copyrighted
software of Huawei Technologies Co., Ltd and possible
licensors. Customers shall not in any manner reproduce,
distribute, modify, decompile, disassemble, decrypt, extract,
reverse engineer, lease, assign, or sublicense the said software,
unless such restrictions are prohibited by applicable laws or
such actions are approved by respective copyright holders
under licenses.
Trademarks and Permissions
, HUAWEI, and are trademarks or registered
trademarks of Huawei Technologies Co., Ltd.
Other trademarks, product, service and company names
mentioned are the property of their respective owners.
Notice
Some features of the product and its accessories described
herein rely on the software installed, capacities and settings of
local network, and may not be activated or may be limited by
local network operators or network service providers, thus the
descriptions herein may not exactly match the product or its
accessories you purchase.
Huawei Technologies Co., Ltd reserves the right to change or
modify any information or specifications contained in this
manual without prior notice or obligation.

NO WARRANTY
THE CONTENTS OF THIS MANUALARE PROVIDED "AS IS".
EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO
WARRANTIES OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITYAND FITNESS FOR A
PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE
ACCURACY, RELIABILITY OR CONTENTS OF THIS
MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BYAPPLICABLE
LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO.,
LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT,
OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS,
BUSINESS, REVENUE, DATA, GOODWILL ORANTICIPATED
SAVINGS.
Import and Export Regulations
Customers shall comply with all applicable export or import
laws and regulations and will obtain all necessary
governmental permits and licenses in order to export, re-export
or import the product mentioned in this manual including the
software and technical data therein.

1 Installing the UIM Card and the
Battery
Note
Consult your network operator to check whether a User
Identity Module (UIM) card is required for the phone.
When installing the UIM card, ensure that the golden contact
area on the UIM card is facing downward and that the beveled
edge of the UIM card is properly aligned with that of the UIM
card slot.
1

2 Charging the Battery
1. Connect the charger to the phone.
2. Connect the charger to a power socket. The charging starts
and the charging icon is displayed in animation.
3. When the charging icon becomes static, indicating that the
charging is complete, disconnect the charger from the
phone.
3 Getting to Know Your Phone
1. Strap hole
2. Earpiece
3. Screen
4. Confirm key
5. Right soft key
6. End key
7. Number keys
8. Charger interface
9. # key
10.Microphone
11.* key
12.Headset interface**
13.Call key
14.Left soft key
15.Navigation keys
2

Note
zThe preceding figure is provided for your reference only.
z**The headset interface is provided only when your phone
supports the FM radio. For details, contact your network
operator.
4 Keys and Functions
Press... To...
End key zPower on or off the phone (by pressing
and holding the key).
zEnd or reject a call.
Call key Dial a number or answer a call.
Left soft
key zIn standby mode, access the main menu
by pressing this key.
zSelect the option displayed in the lower
left corner of the screen.
Right soft
key zReturn to the upper-level menu or exit the
function menu from a menu screen.
zSelect the option displayed in the lower
right corner of the screen.
3

Navigation
keys In standby mode,
zAccess Profiles (by pressing the Up
navigation key).
zAccess Messages (by pressing the Down
navigation key).
zAccess Calendar (by pressing the Left
navigation key).
zAccess Alarms (by pressing the Right
navigation key).
During a call,
zIncrease the volume (by pressing the Up
navigation key or the Right navigation key
during a call)
zDecrease the volume (by pressing the
Left navigation key or the Down
navigation key during a call).
Confirm
key Confirm a selection or display a menu.
Number
keys zEnter digits, letters, and symbols.
zSpeed-dial phone numbers (by pressing
and holding the 2-9keys in standby mode
if speed dial numbers are set).
zAccess the submenu labeled with the
corresponding number.
* key Enable or disable the Meeting profile (by
pressing and holding the key in standby
mode).
# key Lock the keypad (by pressing and holding
the key in standby mode).
4

5 Screen Icons
Icon Indicates... Icon Indicates...
Signal strength. Battery power
level.
No signal is
available.
Code division
multiple access
(CDMA) 1X
network.
Domestic roaming
state. International
roaming state.
Calling state. The keypad is
locked.
New messages. The memory for
messages is full.
Emergency
messages. General profile.
Silence profile. Meeting profile.
Outdoor profile. My Profile profile.
Alarms. Voicemail
messages.
5

6 Locking the Keypad
To prevent misoperations, you can press and hold the # key in
standby mode to lock the keypad. When the keypad is locked,
you can press the Call key to answer an incoming call and dial
an emergency call.
To unlock the keypad, press the Left soft key and then the * key.
7 Call Function
About This Chapter
Note
If the keypad is locked, you must unlock the keypad first.
Otherwise, you can only dial emergency numbers and
answer incoming calls.
Making a Call
1. In standby mode, press the Number keys to enter a phone
number.
zTo make an international call, press the * key twice
consecutively to enter a plus sign (+), and then enter the
country or region code, area code, and phone number in
sequence.
zTo call an extension, enter the phone number, press the *
key three times consecutively to enter P or four times
consecutively to enter T, and then enter the extension
number.
2. Press the Call key to dial the number.
3. Press the End key to end the call or cancel the dialing.
Note
zIn standby mode, you can press the Call key to access the
call log, select a desired number, and then press the Call key
to dial the number.
6