Huawei Mobile Phones User manual

Copyright © 2010 Huawei Technologies Co., Ltd. All
Rights Reserved
No part of this document may be reproduced or transmitted
in any form or by any means without prior written consent of
Huawei Technologies Co., Ltd.
The product described in this manual may include
copyrighted software of Huawei Technologies Co., Ltd and
possible licensors. Customers shall not in any manner
reproduce, distribute, modify, decompile, disassemble,
decrypt, extract, reverse engineer, lease, assign, or
sublicense the said software, unless such restrictions are
prohibited by applicable laws or such actions are approved
by respective copyright holders under licenses.
Trademarks and Permission
, HUAWEI, and are trademarks or registered
trademarks of Huawei Technologies Co., Ltd.
Other product, service and company names mentioned are
the property of their respective owners.
Notice
Some features oftheproduct andits accessoriesdescribed
hereinrelyonthesoftwareinstalled,capacitiesandsettings
oflocalnetwork,andmaynot beactivatedormaybelimited
by local network operators or network service providers,
thus the descriptions herein may not exactly match the
product or its accessories you purchase.

Huawei Technologies Co., Ltd reserves the right to change
or modifyany information or specifications contained in this
manual without prior notice or obligation.
NO WARRANTY
THE CONTENTSOF THIS MANUALARE PROVIDED “AS
IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO
WARRANTIES OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESSFORAPARTICULARPURPOSE,AREMADEIN
RELATION TO THE ACCURACY, RELIABILITY OR
CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLI-
CABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLO-
GIES CO., LTD BE LIABLE FOR ANY SPECIAL,
INCIDENTAL, INDIRECT, OR CONSEQUENTIAL
DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE,
DATA, GOODWILL OR ANTICIPATED SAVINGS.
Import and Export Regulations
Customers shall comply with all applicable export or import
laws and regulations and will obtain all necessary
governmental permits and licenses in order to export,
re-export or import the product mentioned in this manual
including the software and technical data therein.

Safety Precautions
Please read the safety precautions carefully to ensure the
correct and safe use of your wireless device. For detailed infor-
mation, refer to the section “Warnings and Precautions”.
Do not switch on your phone when it is prohibited
to use mobile phones or when the phone may
cause interference or danger.
Switch off your phone near high-precision
electronic devices. The phone may affect the
performance of these devices.
Do not use your phone while driving.
Do not attempt to disassemble your phone or its
accessories. Only qualified personnel are allowed
to service or repair the phone.
Follow any rules or regulations in hospitals and
health care facilities. Switch off your phone near
medical apparatus.
Do not place your phone or its accessories in
containers with strong electromagnetic field.
Switch off your phone in aircraft. The phone may
cause interference to control signals of the
aircraft.

Do not place magnetic storage media near your
phone. Radiation from the phone may erase the
information stored on them.
Do not put your phone in a high-temperature
place or use it in a place with flammable gas such
as a gas station.
Observe any laws or regulations on the use of
wireless device. Respect others’ privacy and
legal rights when using your wireless device.
Keep your phone and its accessories away from
children. Do not allow children to use your phone
without guidance.
Strictly follow the relevant instructions of this
manual while using the USB cable. Otherwise
your phone or PC may be damaged.
Use only approved batteries and chargers to
avoid the risk of explosions.

1.Introduction
Your Phone . . . . . . . . . .1
Security . . . . . . . . . . . . .8
Text Input . . . . . . . . . . .8
2.Customized Settings
Phone Settings . . . . . .11
Display Settings . . . . .11
Call Settings . . . . . . . .12
Network Settings . . . . .12
3.Call Function
Making or Ending a Call .
13
Answering or Rejecting a
Call . . . . . . . . . . . . . . .13
Managing Contacts . . .13
Viewing the Call Records
14
4.Message Function
Message . . . . . . . . . . .15
5.Connection Function
Connectivity Settings . .16
USB . . . . . . . . . . . . . . .16
6.Entertainment
Function
Music Player . . . . . . . .19
Camera . . . . . . . . . . . .19
Browser . . . . . . . . . . . . 19
7.Business Function
Calendar Management 20
File Management . . . . 20
8.Warnings and
Precautions
Electronic Device . . . . 22
Medical Device . . . . . . 22
Potentially Explosive
Atmospheres . . . . . . . . 22
Traffic Security . . . . . . 23
Operating Environment 24
Preventing Hearing
Damage . . . . . . . . . . . 24
Safety of Children . . . . 25
Accessories . . . . . . . . 25
Battery and Charger . . 25
Cleaningand Maintenance
26
Emergency Call . . . . . 27
Disposal and Recycling
Information . . . . . . . . . 28
Reduction of Hazardous
Substances . . . . . . . . . 29
EU regulatory
conformance . . . . . . . . 29
Contents

1
1. Introduction
Your phone can operate in virtually all countries,
automatically switching between WCDMA 900/2100 and
GSM/GPRS 900/1800 networks.
NOTE: The services supported by your phone should be
also supported by the network from where you use the
phone. For details, contact your service provider.
Your Phone
Appearance and Keys
1. Earpiece 2. Scroll key 3. Right
function key
1
11
10
9
8
2
3
6
4
5
7
15
12 13
14

2
4. Clear key 5. Power/End
key 6. Number keys
7. Microphone 8. Send key 9. Music key
10. Left function
key 11.OK key 12. Headset Jack
13. Charger
connector/ Cable
connector
14. Strap hole 15. Main
camera
Left
function
key
Active the function indicated at the left of
the prompt bar.
Scroll key • Up scroll key: Scroll through a menu.
• Down scroll key: Scroll through a menu.
• Left scroll key: Switch to the previous
shortcut menu on the standby screenor
decrease the volume during a call.
• Right scroll key: Switch to the next
shortcut menu on the standby screenor
increase the volume during a call.
Send key • Make or answer a call.
• Enter the Call log screen in standby
mode.
Music key Launch the Music player.

3
SIM/USIM Card and Memory Card
Load your SIM/USIM card before using your phone. And
only unload the SIM/USIM card and the battery after
powering off your phone. To use the SIM/USIM card
properly, please read the following instructions carefully.
NOTE:
• Keep the SIM/USIM card out of the reach of children.
• The SIM/USIM card and its metal contacts can be
easily damaged by scratching or bending.Ensure care
when you carry , load or remove it.
• Always disconnect the charger from the phone before
loading or removing the SIM/USIM card.
Right
function
key
Active the function indicated at the right of
the prompt bar.
Clear key Delete a character before the cursor.
Power
/End key • End an ongoing call or reject an
incoming call.
• Return to the standby mode.
• Press and hold it to power on or power
off the phone.
OK key Confirm a selection.

4
To load the SIM/USIM card, please according to the
following figures.
Your phone supports a memory card (microSD) with a
capacity up to 8 GB.
To load the memory card, please according to the following
figure.
12
34

5
Charging the Battery
NOTE:
• The battery discharges even while not being used. If
you have not used it for a long time, please recharge it
first.
• The charging time depends on the environmental
temperature and the age of the battery.
• Do not strike, throw or cause any kind of violent shock
to the battery, otherwise liquid leakage, body damage,
overheating, fire or explosion may occur.
• Thebatterycanberechargedbuteventuallywearsout.
If the battery lasts for a shorter time period than usual
after being charged normally, replace it with a battery
of the same type.
• Charge the battery by using the charger supplied with
your phone.
Before charging the battery with a cable charger, ensure
that the battery has been properly loaded into your phone.
To charge the battery, first plug in the charger connector to
apowersocket,andtheninserttheplugofthecableintothe
connector of the phone as shown in the following figure.
The figure is for reference only. The actual appearance is
subject to your mobile phone and accessories delivered.

6
NOTE:
• The plug of the charger is in trapezium shape.
Reversely inserting the plug may damage the mobile
phone and charger.
• When the battery power level is very low, the phone
makes alert sounds and displays a prompt. When the
battery power level is too low, the phone will power off
automatically.
• When the battery is being charged, the charging indi-
cator blinks continuously. When the charging indicator
stops blinking, it indicates that the battery is full.
Screen Icons
The icon bar displays the phone status. The following table
illustrates the icons that may appear on this bar.
Indicates signal
strength. Indicates power level of the battery.
The general
profile is
activated.
Thesilent profileis
activated.
The Meeting
profile is
activated.
The Outdoor
profile is activated.

7
The Offline
profile is
activated.
My profile 1 profile
is activated.
My profile 2
profile is
activated.
The headset is
plugged in.
The phone is
currently in a
GSM or
WCDMA
network.
Your PC connects
to the Internet
through your
phone.
You are using
the roaming
service.
You have new text
messages.
The microSD
card is installed. You have new multimedia
messages.
The phone is in
a call. Alarm clock is enabled.
You have new
PUSH
messages.
Music player runs
in the background.

8
Security
Phone or SIM/USIM Card Security Settings
NOTE:
• For certain SIM/USIM cards, you need to enter the
PIN2 code to use certain special functions.
• If you enter a wrong PIN code or wrong PIN2 code for
three consecutive attempts, the SIM/USIM card is
locked. To unlock the SIM/USIM card, enter the PIN
Unblocking Key (PUK) code or PUK2 code.
• The PIN code, PIN2 code, PUK code, or PUK2 code is
provided together with the SIM/USIM card. For details,
consult your service provider.
• The initial phone lock code is 000000.
Select Settings > Security.
•Enable or disable the phone lock and PIN lock.
• Change the phone lock code, PIN code,and PIN2
code.
•Reset your phone to the factory settings.
•If your SIM/USIM card supports the Fixed Dialer
Number (FDN) function, you can set the limit for phone
numbers.
Text Input
NOTE: While entering text:
• Press the # key to switch between input methods. The
current input method name displayed on the upper
right corner of the screen.

9
•SelectSettings > Phone > Text input settings >
Predictive input to enable or disable the predictive
input method.
•SelectSettings > Phone > Text input settings >
Input language to set the input language.
• Press the * key to display the symbols list.
• Press the Clear key to delete the letter before the
cursor.
Predictive Input Method
Withthepredictiveinputmethod,youcaneasilyandquickly
enter words. Press the relevant key that corresponds to the
desired letter and this method will offer you candidate
words.
Press each key carrying the desired letter once, and then
the predictive text scheme will present the candidate words
composed by theletters you haveentered inthe drop-down
menu.
Traditional Input Method
When predictive input method is off, you can use traditional
input method for entering alphabetic characters.
Repeatedly press the number key that carries the letter to
be entered when it appears on the screen.
Number Input Method
In a text editing screen, press and hold the number keys to
enter corresponding numeric characters.
You can also press successively the # key to switch to the
"123" numeric input method, and enter corresponding
numeric characters by pressing the number keys.

10
Symbol Input Method
Youcan press the* key to display thesymbols list and then
select symbols to input.
You can also press the key with number 1 to input the
commonly-used symbols in a text editing screen (except
numeric input method).

11
2. Customized Settings
Phone Settings
Select Settings > Phone, you can change the settings of
the phone.
• Set the profiles.
• Set the system date and time.
• Set the storage location.
• Set the phone language.
• Set the text input settings.
• Set the keypad to be locked on or off automatically.
• Set your phone to power on or off automatically.
• Set power saving mode.
• See the memory status of phone, memory card and
smart card.
• See the version information of the phone.
NOTE: In the standby mode, you can press and hold the *
key to switch between the current profile and the meeting
profile.
Display Settings
Select Settings > Display. You can change the settings for
the phone display.
• Set the wallpaper layout for the home screen.
• Set the standby screen to shortcuts mode or consise
mode.
• Set the backlight delay time for the screen.

12
• Set the operator name on or off.
Call Settings
Select Settings > Call. You can change the call settings.
• Active or deactive the call waiting.
• Setthenetworktoforwordvoicecallsordataandvideo
calls to another number.
• Set the network to bar the calls.
• Set the phone to reminder you of the call duration
before the end of each minute.
• Set to answer a call by answer key or by any key.
• Set the call duration on or off.
• Set the headset to answer the call automatically when
no one answers it in 2 seconds, 5 seconds, or 10
seconds, if this function is enabled.
• Set the auto redial on or off.
• Set the network to show your number or hide your
number.
Network Settings
Select Settings > Network. You can change the settings
for the network. Following options are available: Mode,
Select network, Primary operator and Cell info display.

13
3. Call Function
Making or Ending a Call
1. Enter anumber or select a contact. Press the send key
to make a voice call.
2. During a call, you can select Options to perform
operations in the option list.
3. Press the end key to terminate the call.
Answering or Rejecting a Call
1. Answer a call according to the different answer modes.
• If the answer mode is Any key, press any key
except the end key.
• IftheanswermodeisAnswerkey,pressthesend
key.
• If the headset is in use, press the control key on
the headset.
2. Press the end key or select Options > Reject to reject
a call.
Managing Contacts
Creating a Contact
To add a new contact, perform one of the following
operations:
• Enter a number in standby mode, and then select
Options > Save number.

14
•InContacts screen, select Options > Create contact
to create a new contact.
• Select a record from Call log screen, and then select
Options > Save to Contacts to add number to a new
contact or an existing contact.
Searching for a Contact
You can find a contact from the contacts list. Enter the
contact name you are searching for directly. The contact is
displayed. You can also find a contact by entering the
initials of the first name or the last name of the contact.
Managing a Group
In the Contacts screen, press the left or right scroll key to
select Groups. And then select a group:
•SelectOptions for the following options: Open, Add
group, Create Group message, Edit, Delete,
Memory status, and Manage contacts.
• Press the OK key to view the details. And then select
Add member to add members. To delete a group
member, select a member from the group member list,
and then select Options > Remove contact.
Viewing the Call Records
Select Call log in the main menu and then press the left or
right scroll key to select All, Missed, Received or Dialed .
ThenselectOptions toperformoperationsintheoptionlist.

15
4. Message Function
Message
The screen displays the number of words or bytes of a
message. If the characters you enter exceed this limit, the
text is divided into two or more continuous messages when
it is sent.
Sending a Message
1. Select Messages > Create message to access the
message editing screen.
2. During editing a message:
• YoucanselectOptions > Add attachment toadd
attachment files.
• You can select Options to perform operations in
the option list.
3. After editing the message, select Options > Add
recipient to add a recipient’s number.
4. Press the OK key to send the message.
Viewing a Message
Your phone provides four mailboxes for message. Inbox
stores received messages. Drafts stores created and
saved messages. Outbox stores the messages that failed
to be sent. Sent stores sent messages.
1. Select a mailbox from Messages.
2. Select a message, and then select Options to perform
the operations of the option list.