Huawei ME906E Installation instructions

HUAWEI ME906E LTE M.2 Module
Acceptance Inspection Guide
Issue
01
Date
2013-05-22

Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. For
any assistance, please contact our local office or company headquarters.
Huawei Technologies Co., Ltd.
Huawei Industrial Base, Bantian, Longgang, Shenzhen 518129, People’s Republic of China
Tel: [phone] Global Hotline: [phone] Website: www.huawei.com
E-mail: m[email protected]
Please refer color and shape to product. Huawei reserves the right to make changes or improvements to any
of the products without prior notice.
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written
consent of Huawei Technologies Co., Ltd.
The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and
possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble,
decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions
are prohibited by applicable laws or such actions are approved by respective copyright holders under
licenses.
Trademarks and Permissions
, , and are trademarks or registered trademarks of Huawei Technologies Co., Ltd.
Other trademarks, product, service and company names mentioned are the property of their respective
owners.
Notice
Some features of the product and its accessories described herein rely on the software installed, capacities
and settings of local network, and may not be activated or may be limited by local network operators or
network service providers, thus the descriptions herein may not exactly match the product or its accessories
you purchase.
Huawei Technologies Co., Ltd reserves the right to change or modify any information or specifications
contained in this manual without prior notice or obligation.
NO WARRANTY
THE CONTENTS OF THIS MANUAL ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE
LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS
MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI
TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR
CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR
ANTICIPATED SAVINGS.
Import and Export Regulations
Customers shall comply with all applicable export or import laws and regulations and will obtain all necessary
governmental permits and licenses in order to export, re-export or import the product mentioned in this
manual including the software and technical data therein.

HUAWEI ME906E LTE M.2 Module
Acceptance Inspection Guide
About This Document
Issue 01 (2013-05-22)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3
About This Document
Revision History
Document
Version
Date
Chapter
Description
01
2013-05-22
Creation

HUAWEI ME906E LTE M.2 Module
Acceptance Inspection Guide
Contents
Issue 01 (2013-05-22)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4
Contents
1 Introduction....................................................................................................................................5
1.1 Purpose............................................................................................................................................ 5
1.2 Scope ............................................................................................................................................... 5
2 Acceptance Inspection..................................................................................................................6
2.1 Packaging Modes and Appearance ................................................................................................. 6
2.2 Label Inspection............................................................................................................................... 8
2.3 Performance Inspection ................................................................................................................... 9
2.4 Repack the Module after Inspection............................................................................................... 12

HUAWEI ME906E LTE M.2 Module
Acceptance Inspection Guide
Introduction
Issue 01 (2013-05-22)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5
1 Introduction
1.1 Purpose
This document describes the methods of inspecting Huawei's shipments of ME906E
module. Customers can refer to this document when formulating inspection guides
for accepting Huawei's ME906E.
1.2 Scope
This guide is applicable to the acceptance inspection of Huawei's ME906E. The
inspection methods provided in this guide are recommendations, which can be
modified by customers if necessary.

HUAWEI ME906E LTE M.2 Module
Acceptance Inspection Guide
Acceptance Inspection
Issue 01 (2013-05-22)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6
2 Acceptance Inspection
2.1 Packaging Modes and Appearance
The first-layer packages for the ME906E are large cartons, the second-layer
packages are trays, as shown in the following figures.
Figure 2-1 Large carton packaging
Delivery Label
Carton ID
Weight Label
Ecolabel

HUAWEI ME906E LTE M.2 Module
Acceptance Inspection Guide
Acceptance Inspection
Issue 01 (2013-05-22)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7
Check whether the package has serious damage and has been opened.
Check whether the number of Carton ID labels attached on the large carton is consistent
with the number of trays in the large carton.
Figure 2-2 The tray
Icon Direction
Paste Datum

HUAWEI ME906E LTE M.2 Module
Acceptance Inspection Guide
Acceptance Inspection
Issue 01 (2013-05-22)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8
Figure 2-3 The layoutinside the tray
Check whether the packaging modes are consistent with those shown in the previous
figures.
The ME906E modules are packed in trays. Check the trays for damage.
2.2 Label Inspection
Figure 2-4 ME906E label
Top Label Bottom Label
Insert
Direction

HUAWEI ME906E LTE M.2 Module
Acceptance Inspection Guide
Acceptance Inspection
Issue 01 (2013-05-22)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9
Check whether the information on the label of an ME906E is consistent with the
corresponding label shown in Figure 2-4 . There are two kinds of labels for ME906E and
you can find one that is corresponding to the label shown in Figure 2-4 . The label shown in
Figure 2-4 are of the general version. If the label is customized, see the approval sheet.
Use a 2D barcode scanner to read the 2D barcode and check whether the number read
from the barcode is consistent with the IMEI number printed on the label.
2.3 Performance Inspection
Testing software: HyperTerminal
Testing tools: USB cable, PCB for testing modules, PC
The following is the procedure:
Step 1 Use serial port or the USB cable to connect the testing PCB to the PC.
Step 2 Open Run and input the path C:\Program Files\Windows NT, and hypertrm.exe
will be displayed as shown in the following figure. Double click hypertrm.exe to run
HyperTerminal.
Step 3 Open Run and input hypertrm to enter Connection Description. Input ME906E in
Name column and select the read telephone icon in Icon column as shown in the
following figure.

HUAWEI ME906E LTE M.2 Module
Acceptance Inspection Guide
Acceptance Inspection
Issue 01 (2013-05-22)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10
Step 4 Select the correct serial port (such as COM41) in Connect using column and click
OK as shown in the following figure.
Step 5 Select 115200 in Bits per second column, and then click Apply and OK as shown in
the following figure.