Huawei SmartAX MA5600T Guide

SmartAX MA5600T/MA5603T/MA5608T Multi-
service Access Module
Hardware Description
Issue 24
Date 2018-07-30
HUAWEI TECHNOLOGIES CO., LTD.

Copyright © Huawei Technologies Co., Ltd. 2018. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written
consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or
representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Huawei Technologies Co., Ltd.
Address: Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: [email protected]
Issue 24 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
i

About This Document
Intended Audience
This document describes the hardware used in the MA5600T/MA5603T/MA5608T, including
the cabinet, subrack, chassis, board, cable, and electromechanical device.
This document is intended for:
lNetwork planning engineers
lHardware installation engineers
lInstallation and commissioning engineers
lField maintenance engineers
lData configuration engineers
lSystem maintenance engineers
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol Description
DANGER
Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
Indicates a potentially hazardous situation which, if not
avoided, could result in equipment damage, data loss,
performance deterioration, or unanticipated results.
NOTICE is used to address practices not related to
personal injury.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Hardware Description About This Document
Issue 24 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ii

Symbol Description
NOTE
Calls attention to important information, best practices and
tips.
NOTE is used to address information not related to
personal injury, equipment damage, and environment
deterioration.
Update History
Updates between document issues are cumulative. Therefore, the latest document issue
contains all updates made in previous issues.
Updates in Issue 24 (2018-07-30)
Based on issue 23 (2018-04-27), the document is updated as follows:
Position Description
3.2 Mapping Between
Boards and Software
Versions
Updated the description of the card support version.
Updates in Issue 23 (2018-04-27)
Based on issue 22 (2017-12-29), the document is updated as follows:
Position Description
3.8.1 Upstream Interface
Boards Comparison
Updated the description of the upstream interface boards
comparison.
Updates in Issue 22 (2017-12-29)
Based on issue 21 (2017-09-30), the document is updated as follows:
Position Description
3 Board Added the 3.8.7 H802GICK Board Description and
3.23.3 H806VPEF Board Description.
5 Cable Added the 5.1.4 AC Power Cable (Device).
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Hardware Description About This Document
Issue 24 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
iii

Updates in Issue 21 (2017-09-30)
Based on issue 20 (2017-04-24), the document is updated as follows:
Position Description
3 Board Added the 3.8.13 H801X2CK Board Description and
3.19.8 H80DCSPE Board Description.
Included the V800R018C10 updates.
Updates in Issue 20 (2017-04-24)
Based on issue 19 (2016-10-30), the document is updated as follows:
Position Description
3 Board Added the 3.8.12 H802X2CS Board Description and
3.22.23 H80DSDPM Board Description.
Included the V800R018C00 updates.
Updates in Issue 19 (2016-10-30)
Based on issue 18 (2016-07-30), the document is updated as follows:
Position Description
3 Board Added the 3.22.8 H80BVDMF Board Description.
5.9 Local Maintenance and
Environment Monitoring
Combo Cable
Updated the cable connector and pin assignments.
Updates in Issue 18 (2016-07-30)
Based on issue 17 (2016-04-29), the document is updated as follows:
Position Description
3 Board Added the 3.22.11 H80DSDMM Board Description,
3.20.6 H80BASPB Board Description and 3.20.7
H80CASPB Board Description.
3.2 Mapping Between
Boards and Software
Versions
Updated the description of the card support version.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Hardware Description About This Document
Issue 24 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
iv

Position Description
3.3 Power Consumption and
Maximum Frame Size of
Boards
Added the note for the power consumption of the board.
Included the V800R017C00 updates.
Updates in Issue 17 (2016-04-29)
Based on issue 16 (2015-09-30), the document is updated as follows:
Position Description
3 Board Added the 3.20.6 H80BASPB Board Description, 3.20.7
H80CASPB Board Description and 3.22.11
H80DSDMM Board Description.
3.2 Mapping Between
Boards and Software
Versions
Optimized the description of the card support version.
Updates in Issue 16 (2015-09-30)
Based on issue 15 (2015-07-28), the document is updated as follows:
Position Description
3.1.2 Board Dimensions Added the dimension of MPWE board.
3.7.3 H801MCUD1 Board
Description
Added the pin assignment of the BITS/TOD port of
H801MCUD1 board.
2.3.3 Configuration MA5600T IEC Service Subrack supports the H802MABH
backplane.
2.6.7 Power Distribution
Principle
Added the MPWE board.
5.4.2 120-ohm Clock Cable Added the pin assignment of the 120-ohm Clock Cable.
Updates in Issue 15 (2015-07-28)
Based on issue 14 (2015-04-30), the document is updated as follows:
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Hardware Description About This Document
Issue 24 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
v

Position Description
3 Board The ETSI service subrack supports a new backplane
H803MABC.
3.6.1 SCU Boards
Comparison
The GE/10GE upstream ports of the H801SCUH and
H801SCUV boards support automatic switching for
remote software commissioning using GE upstream
transmission.
Included the V800R016C00SPC100 updates.
Updates in Issue 14 (2015-04-30)
Based on issue 13 (2015-03-30), the document is updated as follows:
Position Description
3 Board Added the 3.21.15 H807ADPE Board Description,
3.21.14 H807ADPD Board Description, 3.21.16
H807ADPM Board Description, 3.22.21 H80DVCPE
Board Description, 3.22.20 H80DVCPD Board
Description, 3.22.22 H80DVCPM Board Description,
3.19.7 H80DCCPE Board Description, and 3.14.2
H801TOPB Board Description.
Included the V800R016C00 updates.
Updates in Issue 13 (2015-03-30)
Based on issue 12 (2015-01-19), the document is updated as follows:
Position Description
3.8 Upstream Interface
Board (GIU)
3.9 Universal Interface
Board (GPIO)
Updated the description of the upstream interface board
and universal interface board.
3 Board Added the 3.22.14 H80AVCPD Board Description and
3.22.15 H80AVCPM Board Description.
Updates in Issue 12 (2015-01-19)
Based on issue 11 (2014-11-25), the document is updated as follows:
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Hardware Description About This Document
Issue 24 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
vi

Position Description
3.2 Mapping Between
Boards and Software
Versions
lModified the H801GICF replacement relationship.
lModified the software version supported by the
H806CCPE board.
Included the V800R015C10SPC100 updates.
Updates in Issue 11 (2014-11-25)
Based on issue 10 (2014-07-30), the document is updated as follows:
Position Description
3 Board Added the 3.6.3 H802SCUB Board Description, 3.11.3
H801MPWE Board Description, 3.19.4 H806CAME
Board Description.
3.4 Board
Configuration(MA5600T/
MA5603T)
Modified the H80BADPE and H80BVDPE boards
supported by the H801SCUF control board.
Included the V800R015C10 updates.
Updates in Issue 10 (2014-07-30)
Based on issue 09 (2014-04-30), the document is updated as follows:
Position Description
3 Board Added the 3.6.6 H801SCUK Board Description.
1 Cabinet Optimized the description of cabinets.
3 Board Optimized the description of boards, including panel
appearance and LED status.
Included the V800R015C00SPC100 updates.
Updates in Issue 09 (2014-04-30)
Based on issue 08 (2013-12-18), the document is updated as follows:
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Hardware Description About This Document
Issue 24 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
vii

Position Description
3 Board Added the boards: 3.15.6 H807GPBH Board
Description, 3.15.8 H805GPFD Board Description,
3.19.6 H806CCPE Board Description, 3.22.16
H806VCPE Board Description, 3.23.4 H806VPGA
Board Description, 3.16.3 H801XGBD Board
Description.
4 Optical and Electrical
Module
Added the 4.6 FE/GE Adaptive Optical Module.
Added an one-channel one-fiber bi-directional FE optical
module in 4.5 FE Optical Module.
3.3 Power Consumption and
Maximum Frame Size of
Boards
The power consumption and maximum frame size of
boards are all introduced in 3.3 Power Consumption and
Maximum Frame Size of Boards. Parameter MTU is
modified to Maximum Frame Size. Parameter Maximum
Frame Size indicates the maximum frame transmission
capability of a board.
3.6 Control Board (SCU)
3.7 Control Board (MCU)
Optimized the LED status description of control boards.
3.21 ADSL2+ Service Board
3.22 VDSL2 Service Board
3.24 SHDSL Service Board
Added the DC block in the working principle figures of
xDSL boards.
Included the V800R015C00 updates.
Updates in Issue 08 (2013-12-18)
Based on issue 07 (2013-11-15), the document is updated as follows:
Position Description
3.5 Board
Configuration(MA5608T)
Added the H802GPBD, H805VDRD boards in 3.5 Board
Configuration(MA5608T).
3.2 Mapping Between
Boards and Software
Versions
The Out of Production information is replaced by Life
Cycle Status information in 3.2 Mapping Between
Boards and Software Versions. The out of production
information in the board description is deleted. Please
query the information in 3.2 Mapping Between Boards
and Software Versions.
Updates in Issue 07 (2013-11-15)
Based on issue 06 (2013-10-30), the document is updated as follows:
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Hardware Description About This Document
Issue 24 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
viii

Position Description
3.4 Board
Configuration(MA5600T/
MA5603T)
Modified the mapping between some boards and versions.
l3.21.1 32-Channel
ADSL2+ Service Board
Comparison
l3.22.1 24-Channel
VDSL2 Service Board
Comparison
l3.22.3 64-Channel
VDSL2 Service Board
Comparison
Optimized the description.
Updates in Issue 06 (2013-10-30)
Based on issue 05 (2013-09-18), the document is updated as follows:
Position Description
3.12.1 Comparison Between
SPU Service Processing
Boards
Added the comparison of SPU boards.
4.3 GE Optical/Electrical
Module
Optimized the description.
Updates in Issue 05 (2013-09-18)
Based on issue 04 (2013-09-12), the document is updated as follows:
Position Description
3 Board Added the boards: H801CKMD, 3.17.4 H802OPGE
Board Description, 3.12.4 H801SPUC Board
Description, 3.24.5 H802SHGM Board Description.
Included the V800R013C10 updates.
Updates in Issue 04 (2013-09-12)
Based on issue 03 (2013-07-25), the document is updated as follows:
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Hardware Description About This Document
Issue 24 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ix