human care Kenmak BAMBINO Parts list manual

producing technology for health
Instruction for Usage of
Kenmak Hospital Beds
Model: BAMBINO
ELECTRICALLY OPERATED CHILD BED
(ELECTRIC LENGTH EXTENSION) (COLUMN MOTORS)
(4 MOTORS)
Read user manual before using the bed!

producing technology for health
Table of Contents
1- Introduction
2- Intended Use
3- Warnings
4- General Features and Accessories
5- Electrical Motors
6- Assembly Instructions
7- Technical Details
8- Bed Safety Devices
9- Instructions for Use
10-Product Labelling
11-Battery
12-Environment, Transport and Storage
13-Maintenance and Reconditioning

producing technology for health
1- Introduction
Thank you for choosing your hospital bed from Kenmak Hospital Furniture.
Every single Kenmak Hospital Furniture product is being produced under
high quality standards bearing in mind to minimize the risk of environmetal
reverse effect. Kenmak Hospital Furniture’s operation are certified by
globally recognized authorities according to ISO 9001, ISO 13485 and ISO
14001 standards.
Kenmak Hospital Furniture beds are being manufactured in Turkey in line
with aforementioned quality standards and are being tested before
dispatching the factory by Quality Team.
Any incident involving the product should be reported to the manufacturer
and the regulatory body.
Kenmak Hastane Malzemeleri ve Elekt. Boya San. Ve Tic. A.Ş.
Sarnıç Yolu No: 23
35414 Gaziemir, Izmir / TURKEY
T: [phone]
[email protected].tr
www.kenmak.com.tr

producing technology for health
2- Intended Use
BAMBINO Kenmak electrically operated child bed is produced with intend to
be used in Intensive Care Units (ICU) of hospitals, nursing homes, and
homes.
Product should be used in suitable indoor atmosphere, between 0 to +40
degrees.
It is intended to be used by individuals older than 12 years old.
The product should only be used with accessories delivered together with
the bed or with the accessories produced by Kenmak.
For the information on safe working load (SWL) see the “Technical Details”
section of this instruction manual.

producing technology for health
3- Warnings
Using the equipment for purposes other than those
previously described is forbidden. The equipment must only
be used by properly trained personnel.
Before starting to operate the bed, the operator must be
perfectly aware of how the bed works, of where the controls
are located and of all technical-functional features. Such
awareness can be acquired by carefully reading this manual.
If is possible, the nursing staff should properly inform
patients on how the bed works and should explain the
individual controls the patient can operate. After such
information has been provided, if is possible, the patient
should be asked to "trial run" the couch.
Removing any safety or protection devices on the appliance
is strictly forbidden; periodically, at weekly intervals, check
the integrity of such devices and make sure they are working
properly.
Before carrying out any maintenance or repair jobs on the
equipment, the operator should have carefully read and
understood the technical information provided in this
manual. All maintenance and repair jobs must be done by
skilled personnel.

producing technology for health
Never position the equipment close to heat sources.
Position and secure the equipment in a stable manner on a
horizontal floor. The bed movement area must be kept
clean, in order and devoid of objects that could restrict free
movement. The instructions, accident-prevention rules and
warnings contained in this manual must always be followed.

producing technology for health
4- General Features and
Accessories
-The patient bed backrest ,height , trendelenburg-reverse trendelenburg positions
and electrical bed extension (length) are adjusted by electrical motors
-The electrical system is 220 Volt , 50 Hz line voltage , 24V output.
-It has self-chargable battery system for power failure.
-The bed has Central locking system casters.
-The footboard has embedded control panel for adjustments of all the functions that
the bed can perform.
-Siderails have gaspring system to slow down.
-Storage plase under the deck
-The mattress surface is X-Ray translucent and covered with ABS material.

producing technology for health
5- Electrical Motors
rated voltage distance: 220/240V
input from the supply: 3,9A
rated frequency: 50/60 Hz
IP number: IPX4
mode of operation: AB 2 min on / 18 min off
6- Assembly Instructions
The product is delivered fully assembled.

producing technology for health
7- Technical Details
-Possible bed positions:
Height, backrest, legrest, Trendelenburg position and extension functions are adjustable
by electrical motors.

producing technology for health
-Height Range (excluding mattress): 48-87 cm
-Backrest Angle: 0-70°
-Knee Brake: 0-40°
-Lenght (bumper to bumper): 177 cm
-Width (bumper to bumper): 98 cm
-Sleep Plane: 85 x 160-190 cm
-Safe Working Load: 180 kg
-Weight of Bed (excluding accessories): 130 kg