human care Ready Stand User manual

Push Down
to Widen Base
Push Down
to Close Base
Adj ustable Leg Base
Belt Placement
Select and position the
appropriate belt around
the patient as per belt
application instructions.
Belt Buckle
Buckle assembly open
Buckle assembly closed
Locking Casters
Locking Casters
1
2
Before lifting the patient, lock the
rear casters. To lock them, step
down on the gray locking tab ( 1) .
To release the lock, step on the
lock release tab ( 2) highlighted in
red.
Interchangeable
Battery System
Adjustable
Knee C ushion
LiftArm
Steering Handle
Mast
Belt Strap Hook
Removable Foot Plate
Actuator
Grab H andle
MRD 008
1
Rev. A
Ready Stand

Electronics Pack Features
1
2
1. RED Emergency Stop Button
- Press button to shut off.
- Turn the button to disengage.
2. Charge Indicator LED:
Green light - battery charged.
Amber light - battery is charging.
Flashing Amber light - battery is
Removing Battery Pack


TO REMOVE
Lift pack up using
handle. Once clear of
the plug, pull away
from the slots on the
electronics pack
mounting frame.
TO REPLACE
Position the metal
tabs on the back of
the battery pack into
the slots on the
electronics pack
mounting frame. Push
the battery down so
the plug on the
electronics pack sits in
the battery.
Battery and Electronics Pack Overview
3. Emergency S
4. Charge Indicat
3
4
UP DOWN
Hand Control Overview
Use the hand conrtrol to raise or
lower the lift are by pressing the
UP or DOWN buttons as indicated
below.
To lower the lift arm
manually, unlock the red
handle on the top of the
lift motor (1).
Turn the barrel on the lift
motor to lower the lift
arm (2).
Manual Lowering


1
2
1
2
5
678
Bottom View
mounting
frame
plug
MRD 008
2
Rev. A