Hunter Products JE1166 Datasheet

Owner’s Manual
with Assembly Instructions
Styles and colores may vary.
Made in China.
The owner’s manual contains important safety information as well as assembly, use and
maintenance instructions.
The Ride-on Car must be assembled by an adult who has read and understands the
instructions in this manual.
Keep the package away from children and dispose of properly before use.
Keep this manual for future reference.
Item # 4102
Model # JE1166

This ride-on car will provide your child with many miles of riding enjoyment.
To help assure you and your rider are safe we ask you to please read this
manual carefully, and keep it for future reference.
Follow the recommendations in this manual, they are designed to improve
the safety and operation of your ride-on car and it’s rider.
Battery
Charger
6V7Ah*2
15V800mA
Suitable age:
Load Capacity:
Size of car:
Power way:
Charge time:
37~96 Months
Under 30 kgs
108*60*43 CM
Charging type
8 ~ 12 hours
About Your New Ride-On │ 1
The Bentley Exp12 Battery operated Ride-On Manufactured by Zhejiang
Jiajia Ride-On Co., Ltd (Add: Xincang Industrial Zone, Pinghu City,
Zhejiang Province, P.R.China) under licence from Bentley Motors Limit-
ed England. “Bentley”, the ‘B’ in wings device and other associated
logos and names are trademarks of Bentley Motors Limited. The body
designs of Bentley motor cars are protected by Bentley Motors Limited
under design, trademark and trade dress regulations.

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
1
2
2
2
2
6
2
8
4
4
2
1
2
1
1
1
1
2
1
1
PART
NO.
REMARKS
PART NAME
Q’ty (pcs)
Vehicle body
Gear box
Driving wheel
Front wheel
Bush
Ø12 washer
Motor hood
Ø4x12 flat head screw
Lock nut
Hubcap
M5x16 machine screw
Seat
Mirror
Steering Wheel
M5x40 machine screw
Ø5 nut
Windshield
Spanner
Charger
Remote controller
Placed on the steering wheel
Placed on the steering wheel
Left and right
for seat
One labeled “L”, and the other one labeled “R”
Parts List │ 2

19
20
18
13
14
1
7
3
2
5
6
6
9
9
10
10
6
4
8
12 11
17
15 16
HINT: Some parts shown are assembled on both sides of vehicle
Parts Diagram │ 3
CONTROLLER STYLES MAY VARY

Before Assembly │ 4
• Make sure that the power switch is turned “OFF” before assembling the ride-on.
• Before first time use, charge the battery for at least 8 to 12 hours.
• Assembly tools required:
WARNING!
Screwdriver
(not included) Spanner
●Non-rechargeable batteries are not to be recharged.
●Rechargeable batteries are to be removed from the toy before being charged.
●Rechargeable batteries are only to be charged under adult supervision.
●Different types of batteries or new and used batteries are not to be mixed.
●Batteries are to be inserted with the correct polarity.
●Exhausted batteries are to be removed from the toy.
●The supply terminals are not to be short-circuited.
BATTERY INFORMATION
• CHOKING HAZARD - Small parts. Not suitable for children under 36
months. The product contains small parts, keep children away when
assembling.
• ADULT ASSEMBLY REQUIRED.
• Always remove protective material and poly bags and dispose before
assembly.

2
3
4
51
Attach the Rear Wheels │ 5
Driving Wheel
Rear axle
Rear Bottom View
1. Slide the gear box onto the rear axle. “R” labeled gear box should be fit to the
“R” side of vehicle body; “L” labeled gear box should be fit to “L” side of vehicle
body. Keep the motor and the connector on the gear box pass through the
larger hole on the rear of the vehicle and out where the battery sits.
2. Slide the driving wheel onto the rear axle. And keep the driving wheel match
up with the gear box.
3. Slide the Ø10 washer onto the rear axle.
4. Tighten a lock nut to the end of the rear axle with a spanner. HINT: An extra
spanner has been provided to hold the Lock Nut on the other side of the
rear axle while tightening the Lock Nut on the other side.
Repeat the above procedure to assemble the other driving wheel.
5. Fit the hubcaps to the wheel.

1
2
3
4
5
6
Front axle
Attach the Front Wheels │ 6
Front Wheel
Front Bottom View
Remove all the parts from the front axle.
1. Slide a Ø10 washer onto the front axle.
2. Slide a bush into the hole in the center of the front wheel.
3. Slide the front wheel onto the axle. And keep the wheel matching
up with the bush.
4. Slide a Ø10 washer onto the front axle.
5. Tighten a lock nut to the end of the front axle with a spanner.
6. “Snap” the hubcap to the wheel.
Repeat the above procedure to assemble the other front wheel.

24
1
6
7
3
5
Attach the Steering Wheel │ 7
End of Steering column
Remove the M5x40 machine screw and Ø5 nut from the steering wheel.
5. Place the steering wheel over the steering column, protruding from the middle of
the steering wheel base.
6. Align the holes on each side of steering wheel with the holes at the end of the
steering column.
7. Fasten a nut on the opposite end of the screw to
secure the steering wheel to the steering
column.
Hint: you may need to push and hold steering
rod up from under front of car to align
hole in steering wheel.
1. With a screwdriver remove the
screw on the battery cover
located in the center of the steering
wheel.
2. Remove the battery cover from the
top of the battery compartment.
3. Insert two AA batteries in their
correct polarities(AA 1.5V X2 are
required).
4. Place the battery cover over the
battery compartment and fasten
with the screw you removed in step
one.
Add the Batteries (Not included) of Steering Wheel
Attach the Steering Wheel

2
1
Connect the Power Supply │ 8
1. Plug the vehicle connector into the motor connector on
body as shown above. Repeat for the other side.
2. Plug the red fuse connector into the terminal on battery.
Rear Top View
Fuse box
Battery
Vehicle
connector Motor connector

1
2
x4
Attach the Motor Hood │ 9
1. Fit the motor hood on the motor.
2. Tighten four ø4x12 flat head screws to secure it.
Repeat the above steps for the other motor hood.
Rear View