Hunter Products JS007 User manual

• Suitable for age 3 years+
•Maximum user weight: 30kg
•Adult assembly required
Please keep this manual for future reference as it contains important
information.
Before first time use, charge the battery for at least 8 hours.
OWNER'S MANUAL
Read and understand this entire manual before using!
CHILDREN'S
ELECTRONIC TOY CAR
Model No: JS007
ITEM NO: 5194

Table of Contents
About Your New Vehicle
Thank you for your purchasing our products, we wants your child to enjoy this product for years to
come. Keep these points in mind as you read this guide:
1. About Your New Vehicle
2. Parts List
3. Parts Diagram
4. Assembly Steps
5. How To Operation Your Vehicle
6. Charging The Vehicle
7. Troubleshooting Guide
8. Maintaining Your Vehicle
9. Disposal Of Battery
FOR THE SAFETY OF YOUR CHILD, PLEASE READ ALL WARNINGS AND
ASSEMBLY/USE INSTRUCTIONS. KEEP THIS GUIDE FOR FUTURE REFERENCE.
• ADULT ASSEMBLY REQUIRED. The product contains small parts, which are for
adult assembly only. Keep small children away when assembling.
• Always remove protective material and poly bags and dispose before assembly.
Suitable age: 3 years+ Battery: 6V 7AH *1
Load Capacity:
Under 30KGS
Size of car: 97x66x65CM
Speed: 3KM/H
Power way: Charging type
Charger:
Input: depend on local voltage
Output: DC 6V1A
Average
battery life:
Approximately
300 times
Charge time: 8-12 Hours Fuse: 10A
WARNING!
PLEASE NOTE: IN CASE OF PRODUCT FAULT DO NOT RETURN THIS PRODUCT TO STORE. PLEASE
CONTACT HUNTER PRODCUTS CUSTOMER SERVICE TOLL FREE NUMBER: 1800 224 094
OR VISIT WWW.ELECTRICRIDEON.COM.AU
-1-

NO.
34
56
78
9
1
3
4
6
1
3
2
1
1
1
Par t Par t
10
11
13
12
14
Parts List
PART
NO.
PART
NAME
PICTURE
Q’ty
(pcs)
REMARKS
PART
NO.
PART
NAME
PICTURE
Q’ty
(pcs)
REMARKS
Vehicle
body
Driving
wheel
Ø10
Locknut
Ø12
Washer
Ø5
Locknut
Rear axle
M5x35
machine
screw
M5x14
machine
screw
Placed
on the
front axle
and rear
axle.
Placed
on the
front axle
and rear
axle.
Placed
on the
steering
wheel
Placed
on the
front axle
plate
Placed
on the
front axle
plate
-2-
PLEASE NOTE: IN CASE OF PRODUCT FAULT DO NOT RETURN THIS PRODUCT TO STORE. PLEASE
CONTACT HUNTER PRODCUTS CUSTOMER SERVICE TOLL FREE NUMBER: 1800 224 094
OR VISIT WWW.ELECTRICRIDEON.COM.AU
3
Wheel
1
Front alxe
plate
Placed
in the
assembly
package
1
Steering
shaft
6
Ø5
Washer
Placed
on the
front axle
plate
1
Ø10
wahser
1
Split
pin

NO.
Par t Par
1
16
15
17
Parts List
PART
NO.
PART
NAME
PICTURE
Q’ty
(pcs)
REMARKS
PART
NO.
PART
NAME
PICTURE
Q’ty
(pcs)
REMARKS
Charger
18
2
Spanner
-3-
PLEASE NOTE: IN CASE OF PRODUCT FAULT DO NOT RETURN THIS PRODUCT TO STORE. PLEASE
CONTACT HUNTER PRODCUTS CUSTOMER SERVICE TOLL FREE NUMBER: 1800 224 094
OR VISIT WWW.ELECTRICRIDEON.COM.AU
1
Handle
bar
1
Seat

2
5
8
11
14
3
6
9
12
15
1
10
4
7
13
16
1
2
33
4
3
4
5
6
7
8
9
10
11
12
6
14
15
16
7
13
13
Parts Diagram
NOTE: Some Parts Shown are assembled on both sides of vehicle
Driving wheel *1
Wheel *3
Front axle plate *1
Split pin *1
Vehicle body *1 Ø12 Washer *6
Ø5 Locknut *3
Ø5 washer *6
Steering shaft *1
Rear axle *1
Handel bar *1
Ø10 Locknut *4
Ø10 Washer *1
M5x14 machine screw *3
M5x35 machine screw *1
Seat*1
Tools Required
Screwdriver(not included)
Spanner
Pliers(not included)
-4-
PLEASE NOTE: IN CASE OF PRODUCT FAULT DO NOT RETURN THIS PRODUCT TO STORE. PLEASE
CONTACT HUNTER PRODCUTS CUSTOMER SERVICE TOLL FREE NUMBER: 1800 224 094
OR VISIT WWW.ELECTRICRIDEON.COM.AU

1
2
Assembly Steps
• Your new vehicle requires adult assembly. Please set aside at least 40 minutes for
assembly. Children can be harmed by small parts, sharp edges and sharp points in the
vehicle's unassembled state. Care should be taken in unpacking and assembly of the
vehicle. Children should not handle parts, or help in assembly of the vehicle.
• Please identify all parts before assembly and save all packaging material until assembly
is complete to ensure that no parts are discarded.
• Assembly tool for need: screwdriver(not included),pliers(not included) and spanner.
Ø5
washer
Ø5 washer
Ø5 washer
M5x14 machine screw
M5x14 machine
screw
Ø5 locknut
Ø5 locknut
Front alxe
support
Front alxe
plate
Front alxe
plate
Rear axle
●Turn the vehicle body upside down.
●Remove all the parts from the front axle
plate.
●Fit a Ø5 washer against the front axle
support.
●Fit the front axle plate against the front axle
support.
●Fit a Ø5 washer against the front axle plate.
●Insert the M5x14 machine screw through
the Ø5 washer, the front axle,Ø5 washer plate
and out through the front axle support, fit and
hold a Ø5 washer against the front axle
support, then fit a Ø5 locknut to the end of the
screw.
●While holding the locknut with the pliers,
tighten the screw with a screwdriver.
●Repeat for the other side.
●Remove all the parts from the rear
axle.
●Insert the real axle through the hole in
the rear of the vehicle body.
-5-
PLEASE NOTE: IN CASE OF PRODUCT FAULT DO NOT RETURN THIS PRODUCT TO STORE. PLEASE
CONTACT HUNTER PRODCUTS CUSTOMER SERVICE TOLL FREE NUMBER: 1800 224 094
OR VISIT WWW.ELECTRICRIDEON.COM.AU

3
4
5
Assembly Steps
Ø10 locknut
Ø10 locknut
Ø12 washer
Ø12 washer
Ø12 washer
Ø10 washer
Ø10 washer
Split pin
Split pin
Front axle plate
Steering shaft
Steering shaft
Driving wheel
Wheel
Rear axle
●Fit the driving wheel onto the rear axle.
Make it match with the gear box.
●Fit a Ø12 washer onto the rear axle.
●Fit a Ø10 locknut to the end of the rear
axle.
●Repeat this procedure to assemble the
other driving wheel to real axle.
●Tighten the locknuts on both sides of
rear axle with two spanners. DO NOT
over-tighten.
●Remove a Ø10 locknut and a Ø12
washer from the front axle. And leave
over a Ø12 washer.
●Fit a wheel onto the front axle.
●Fit a Ø12 washer onto the front axle.
●Fit a Ø12 locknut to the end of the front
axle. And tighten with a spanner, DO
NOT over-tighten.
●Repeat this procedure to assemble the
other wheel to front axle.
●Turn the vehicle body on its side.
●Insert the straight end of the steering
shaft up through the hole in the vehicle
body.
●Insert the bent end of the steering shaft
through the hole in the front axle plate. Fit
a Ø10 washer onto the steering shaft, and
insert a split pin through the hole in the
steering shaft. Bend the ends of the split
pin back using a pair of pliers.
-6-
PLEASE NOTE: IN CASE OF PRODUCT FAULT DO NOT RETURN THIS PRODUCT TO STORE. PLEASE
CONTACT HUNTER PRODCUTS CUSTOMER SERVICE TOLL FREE NUMBER: 1800 224 094
OR VISIT WWW.ELECTRICRIDEON.COM.AU

7
8
6
Assembly Steps
M5x14 machine screw
Seat
M5x35 machine screw
Ø5 nut
Handle bar
●Turn the vehicle body over.
●Remove the M5x35 machine screw and
Ø5 nut from the handle bar.
●Insert the handle bar to the end of the
steering shaft. Line up the holes in the handle
bar with the hole in the steering shaft.
Tighten the M5x35 machine screw and Ø5
nut back in the same location with a
screwdriver.
●Locate the red connector and plug it into
the terminal on battery.
●Insert the tabs on the seat into the slots in
the vehicle body, and tighten a M5x14
machine screw to secure it with a
screwdriver.
Fuse box
Red connector
-7-
PLEASE NOTE: IN CASE OF PRODUCT FAULT DO NOT RETURN THIS PRODUCT TO STORE. PLEASE
CONTACT HUNTER PRODCUTS CUSTOMER SERVICE TOLL FREE NUMBER: 1800 224 094
OR VISIT WWW.ELECTRICRIDEON.COM.AU

Assembly Steps
IMPORTANT SUPPLEMENT TO INSTRUCTION MANUAL
After assembling any wheel to the axles, please check the gap
between the screw thread and the collapsible (refer to below
picture), if the gap is too big, please add two or three washers inside
the wheel, But after tightening the nut outside the wheel, please turn
the wheel by your finger to check if the wheel can run smoothly, this
is very important, because if the wheel can run smoothly, it is ok, but
if the nut press the wheel and the wheel can’t run smoothly, the
motor will be broken easily! Then you need to decrease one or two
washers to make sure the wheel can run smoothly!
GAP
-8-
PLEASE NOTE: IN CASE OF PRODUCT FAULT DO NOT RETURN THIS PRODUCT TO STORE. PLEASE
CONTACT HUNTER PRODCUTS CUSTOMER SERVICE TOLL FREE NUMBER: 1800 224 094
OR VISIT WWW.ELECTRICRIDEON.COM.AU

How To Operate Your Vehicle
PREVENT INJURIES AND DEATHS:
• NEVER LEAVE CHILD UNATTENDED. DIRECT ADULT SUPERVISION
IS REQUIRED. Always keep child in view when child is in vehicle.
• Never use in roadways, near cars, on or near steep inclines or steps,
swimming pools or other bodies of water.
•Always wear shoes.
•Always sit on the seat.
• Suitable for age 3 years+; Maximum user weight is 30kgs.
Rules for Safe Riding
READ THESE RULES ALOUD TO YOUR CHILD AND THEIR PLAYMATES AND MAKE SURE
THEY UNDERSTAND THEM!
• Important! Before using the vehicle for the first time, the battery needs to be charged for at least 8 hours,
no more than 10 hours. Only an adult can charge or recharge the battery.
• Make sure all places with the screw has already been locked.
Must confirm before using that following work which is already finished:
• Always wear a helmet when riding.
• Direct Adult Supervision Required.
• Keep Children within Safe Riding Areas:
• Never use in roadway, near motor vehicles, on lawn space, on or near steep inclines or steps, swimming
pools or other bodies of water;
• Use the toy only on flat surfaces. such as inside your house, garden or playground.
• Never use in the dark. A child could encounter unexpected obstacles and have an accident. Operate the
vehicle only in the daytime or a well-lit area.
• It is not recommended to drive the vehicle on wet surfaces or on lopes of greater than 15 degrees.
• Do not use this vehicle outdoors when it is raining or snowing.
• Make sure you come to a complete stop before changing directions from forward to back.
• Please follow the correct weight and age limits allowed to drive this vehicle.
• It is prohibited to change the circuit or add other electric parts
• Inspect wires and connections of the vehicle periodically.
• In order to avoid accidents, please ensure the vehicle is safe before riding.
• Do not let any child touch the wheels or be near them when the car is moving .
WARNING!
-9-
PLEASE NOTE: IN CASE OF PRODUCT FAULT DO NOT RETURN THIS PRODUCT TO STORE. PLEASE
CONTACT HUNTER PRODCUTS CUSTOMER SERVICE TOLL FREE NUMBER: 1800 224 094
OR VISIT WWW.ELECTRICRIDEON.COM.AU