Hygiena Cube Operating instructions

Hygiena Cube
A rapid, qualitative, quantitative and reliable way
to scan your GlutenTox®Sticks Plus for Reader
• Easy-to-use reader for standard lateral flow assays
• Provides quantitative, semi-quantitative & qualitative results
• Maintenance-free device
• Battery operated
• Small compact design
• Storage capacity of 100 scans
• Data transfer to a PC or laptop,
with the Cube Data Reader software
hygiena.com

How to use
Turn on device
To turn on the device press the
button briefly, less than 1 second.
Measurement
Start the measurement by briefly
pressing the button.
The device measures and the
display shows RUN.
After a few seconds the result
is displayed.
Ready for operation
The display shows ON and the
reader is ready for operation.
The rapid test is now required.
Measurement
Press the button briefly.
The display will show RFID or TEST.
Test insertion
Place the test into
the adapter. If you
use a strip adapter,
you have to put
the strip inside the
adapter. If you use
a cassette adapter, you have to put the
adapter on top of the cassette. Be sure
that the adapter is correctly placed.
After the test is placed
in the strip/cassette
adapter, the reader
can be placed on top.
The slanted reader
corner and a corresponding counterpart
inside the adapter help to find the
correct position of the reader.
Configuration data
via RFID
Test configurations are uploaded
via RFID before the measurement.
Put the lot specific RFID card
onto the top side of the device or
hold the device against the RFID
tag sticking on the test box until
the configuration data has been
uploaded (audible signal).
hygiena.com
1
4
6
2
5
3