Hytera PD602 User manual

PD602 User Guide
Quick Reference
Quick Reference User Guide
Radio Guide for
Speaker
Accessory / Programming Port
Left View Front View
Power / Volume Knob
Channel Knob
Microphone
Push to Talk Button
Long Press
Short Press
LED Indicator
Radio Operation
Charging the Radio Turning the Radio On
• Please ensure the radio is o when charging
• Charging while the radio is on shortens the lifespan of your battery
• Full charge may take up to 3 hours
• The radio should be placed in the charger with the speaker (front of
radio) facing the front of the charger.
• Rotate the on / o volume knob to power on & set the volume
• If the radio is tuned to a non‐programmed channel it will emit a continuous
error tone
• Please reference the zone / channel list to select the appropriate channel
Transmitting Voice Calls Receiving Voice Calls
• To initiate a transmission hold the Push to Talk (PTT) Button
• Once you press the PTT Button, the radio will emit a talk permit chirp
• This talk permit chirp signals that you can begin to speak
• When done speaking release the PTT Button
• For a set period of time the system resources are held to allow
immediate responses
• If there is no response within this period the system will be released
signaled by a call ended chirp
• Portables automatically receive transmissions on the Talkgroup
Channel Controls
• There are zones
• Each zone has channels programmed
• To switch zones
• To switch channels Turn the Channel Knob

Your Local Dealer
Custom Programming
Zone Zone
Channel Name Channel Name Channel Name Channel Name
Zone Zone
Channel Name Channel Name Channel Name Channel Name
Zone Zone
Channel Name Channel Name Channel Name Channel Name
Zone Zone
Channel Name Channel Name Channel Name Channel Name
For additional support please contact your local dealer.