Hytera PNC370 User manual

PNC370 手持终端
快速操作手册
PNC370 PoC Terminal
Quick Reference Guide

Installation and Operation
Attaching the Battery
1. Slide the battery latch to the unlock position and remove the
battery cover.
2. Attach the battery.
3. Press the cover into place and slide the battery latch to the lock
position.
Installing the SIM Card
1. Remove the battery and open the card slot cover.
2. Install the SIM card.
3. Put the battery cover in place.
Charging the Battery
To charge the battery, connect the radio to the power adapter, power
bank, or PC with the USB cable.
To determine the charging status, check the battery icon or percentage
shown on the LCD display.
To ensure optimum waterproof and dustproof performance, close the
USB port cover after charging the terminal.
1
2
3
Card Slot Cover
Card Slot
SIM Card




Caution
Read the Safety Information Booklet before charging.
Use the approved charger to charge the battery.
The remaining lithium-ion battery power is limited to 30%
pursuant to the new lithium battery shipment regulation
approved by International Air Transport Association (IATA).
1
2


Attaching the Belt Clip
Attaching the Audio Accessory
Open the cover of the audio accessory connector and insert the audio
accessory into the connector.
To ensure optimum waterproof and dustproof performance, close the
cover after removing the audio accessory.
12
1
2
Note
Contact your dealer to obtain the installation package of the
PNC370 WLAN Hotspot Editing Tools.
Connecting to the Internet
You can connect to the Internet by using the cellular network or WLAN
network.

To connect to the cellular network, install the SIM card and activate
the cellular data service.

To connect to the WLAN network, go to Setting > WLAN to enable
the WLAN network and then choose one of the listed networks. If
a password is required, connect the terminal to the PC, and then
install the PNC370 WLAN Hotspot Editing Tools and the ADB drive to
con󽗉gure the WLAN hotspot.

Status Indication
Checking LCD Indications
Icon Terminal Status
The battery is fully charged.
The battery is nearly dead.
The number of bars indicates the signal
strength of the cellular network.
The terminal is connected to the WLAN
network.
No SIM-card is detected.
An audio accessory is connected.
The BT feature is enabled.
A BT device is connected.
The positioning feature is enabled.
Checking LED Indications
LED Indicator Terminal Status
Glows orange
• Being turned on.
• Ready to press the PTT key to speak to an
individual.
• A dynamic group call is in progress.
Glows green Receiving.
Glows red Transmitting.
Flashlight
Battery Latch
Battery Cover+Battery
Rear Microphone
USB Port
Audio
Connector
Belt Clip
Accessory

Application Installation
select the 󽗉le.
PoC Service
Push-to-talk over Cellular (PoC) provides direct one-to-one and one-to-
many voice communication services over the cellular network.
You can access PoC menu to initiate a call.
1.
For details on more features and operations, please visit our website
at: http://www.hytera.com, or scan the QR code to download the
relevant user manual.
Note
This service is available only when you have installed the PoC
application on the terminal.
isthetrademarkorregisteredtrademarkofHyteraCommunicationsCorporationLimited.
201 yteraCommunicationsCorporationLimited.AllRightsReserved.
Address:HyteraTower,Hi-TechIndustrialParkNorth,9108#BeihuanRoad,NanshanDistrict,
Shenzhen,People'sRepublicofChina
Postcode:518057
http://www.hytera.com
8H
2.
3.
Go to Home > PoC, and then press OK/Menu key.
Select the required contact.
Press and hold the PTT key and speak.
You can listen to a call without any operation.
• To install an application online, go to APP Store > Software, and
select the required software.
• To install an application locally, transfer the APK 󽗉le to the
terminal using the computer, and then access File Manager to