HBHC25-20200302-A0
Subject to change without notice.
5. Additional Information / Documents
4. Detection Pattern
Wiring Diagram
Control gear
Control gear
Control gear
Wire Preparation
0.75 - 1.5mm
8mm
To make or release the wire from the terminal,
use a screwdriver to push down the button.
For some special Applications, customers may need a larger Bluetooth transmission for both smartphone to device and device to device. Thanks to the reinforced Bluetooth antenna,
with it being added to the sensor, the transmission distance(smartphone to device) enlarges to 20m, the distance of device to device is around 50m.
12.7
9.5
31.2
48.7
Optional accessory: Reinforced Bluetooth antenna
Installation hole 6.5mm
Bluetooth antenna
Ceiling mounted detection pattern (m)
Ceiling mounted height(m)
50
6
10%
30%
75%
50%
Wall mounted height (m)
Wall mounted detection pattern (m)
9
4
0
10%
30%
75%
50%
1. For full explanation of Hytronik Photocell AdvanceTM technology, please kindly refer to www.hytronik.com/download ->knowledge ->Introduction of Photocell Advance
2. To learn more about detailed product features/functions, please refer to www.hytronik.com/download ->knowledge ->Introduction of App Scenes and Product Functions
3. Regarding precautions for Bluetooth product installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Bluetooth Products - Precautions for Product Installation and Operation
4. Regarding precautions for microwave sensor installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Microwave Sensors - Precautions for Product Installation and Operation
5. Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/bluetooth technology ->Bluetooth Sensors
6. Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy
