iDPRT iT4B User manual

Appearance and Components

Packing List
Note: The packing materials are actually based on the order. 

Xiamen Hanin Electronic Technology Co., Ltd.
ADD: 4F, 2#, Aide Airport Industrial Park, Huli District, Xiamen, China.
WEBwww.idprt.com
iT4B
Quick Start Guide
Printer AC Adapter Power Cord Label Roll Ribbon Spindles
Ribbon
Note: The packing materials are actually based on the order.
USB Cable Empty Ribbon Core CD
Quick Start Guide
Quick Start Guide
Front View
Front Cover
WŽǁĞƌƵƩŽŶ
Printer Cover
Status Indicator
&ĞĞĚƵƩŽŶ
ŽǀĞƌKƉĞŶƵƩŽŶƐ
Rear View
USB Port
(Type B)
Ethernet Port
Power Receptacle
Moveable Roll Holders
Locking Tab
Inside View
Printer Mechanism
Mechanism Lock
Back Label Sensor
Front Label Sensor
Platen
Moveable Label Guides
FCC WARNING：
This device complies with part 15 of the FCC Rules.
KƉĞƌĂƟŽŶ ŝƐƐƵďũĞĐƚ ƚŽ ƚŚĞ ĨŽůůŽǁŝŶŐ ƚǁŽ ĐŽŶĚŝƟŽŶƐ
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
ŝŶĐůƵĚŝŶŐ ŝŶƚĞƌĨĞƌĞŶĐĞ ƚŚĂƚ ŵĂLJ ĐĂƵƐĞ ƵŶĚĞ
ƐŝƌĞĚŽƉĞƌĂƟŽŶ
ŶLJĐŚĂŶŐĞƐŽƌ ŵŽĚŝĮĐĂƟŽŶƐŶŽƚĞdžƉƌĞƐƐůLJĂƉƉƌŽǀĞĚ
by the party responsible for compliance could void the
user's authority to operate the equipment.
EKddŚŝƐĞƋƵŝƉŵĞŶƚŚĂƐďĞĞŶ ƚĞƐƚĞĚ ĂŶĚ ĨŽƵŶĚƚŽ
ĐŽŵƉůLJ ǁŝƚŚ ƚŚĞ ůŝŵŝƚƐ ĨŽƌ Ă ůĂƐƐ  ĚŝŐŝƚĂů ĚĞǀŝĐĞ
pursuant to part 15 of the FCC Rules. These limits are
ĚĞƐŝŐŶĞĚ ƚŽ ƉƌŽǀŝĚĞ ƌĞĂƐŽŶĂďůĞ ƉƌŽƚĞĐƟŽŶ ĂŐĂŝŶƐƚ
harmful interference when the equipment isoperated
in a commercial environment. This equipment
ŐĞŶĞƌĂƚĞƐ ƵƐĞƐ ĂŶĚ ĐĂŶƌĂĚŝĂƚĞ ƌĂĚŝŽ ĨƌĞƋƵĞŶĐLJ
ĞŶĞƌŐLJ ĂŶĚ ŝĨ ŶŽƚ ŝŶƐƚĂůůĞĚ ĂŶĚ ƵƐĞĚ ŝŶ ĂĐĐŽƌĚĂŶĐĞ
ǁŝƚŚ ƚŚĞ ŝŶƐƚƌƵĐƟŽŶ ŵĂŶƵĂů ŵĂLJ ĐĂƵƐĞ ŚĂƌŵĨƵů
ŝŶƚĞƌĨĞƌĞŶĐĞ ƚŽ ƌĂĚŝŽ ĐŽŵŵƵŶŝĐĂƟŽŶƐ KƉĞƌĂƟŽŶŽĨ
ƚŚŝƐ ĞƋƵŝƉŵĞŶƚ ŝŶ Ă ƌĞƐŝĚĞŶƟĂů ĂƌĞĂ ŝƐ ůŝŬĞůLJ ƚŽ ĐĂƵƐĞ
harmful interference in whichcase the user will be
required to correct the interference at his own
ĞdžƉĞŶƐĞ
ͲͲZĞŽƌŝĞŶƚŽƌƌĞůŽĐĂƚĞƚŚĞƌĞĐĞŝǀŝŶŐĂŶƚĞŶŶĂ
ͲͲ/ŶĐƌĞĂƐĞƚŚĞƐĞƉĂƌĂƟŽŶďĞƚǁĞĞŶƚŚĞĞƋƵŝƉŵĞŶƚĂŶĚ
receiver.
-- Connect the equipment into an outlet on a circuit
ĚŝīĞƌĞŶƚĨƌŽŵƚŚĂƚƚŽǁŚŝĐŚƚŚĞƌĞĐĞŝǀĞƌŝƐĐŽŶŶĞĐƚĞĚ
ͲͲŽŶƐƵůƚƚŚĞĚĞĂůĞƌŽƌĂŶĞdžƉĞƌŝĞŶĐĞĚƌĂĚŝŽdsƚĞĐŚ
nician for help.
dŽ ŵĂŝŶƚĂŝŶ ĐŽŵƉůŝĂŶĐĞ ǁŝƚŚ &Ɛ Z& džƉŽƐƵƌĞ
ŐƵŝĚĞůŝŶĞƐ dŚŝƐ ĞƋƵŝƉŵĞŶƚ ƐŚŽƵůĚ ďĞ ŝŶƐƚĂůůĞĚ ĂŶĚ
operated with minimum distance between 20cm the
ƌĂĚŝĂƚŽƌ LJŽƵƌ ďŽĚLJ hƐĞ ŽŶůLJ ƚŚĞ ƐƵƉƉůŝĞĚ ĂŶƚĞŶŶĂ
ĂƵƟŽŶ
dŚŝƐŝƐĂůĂƐƐƉƌŽĚƵĐƚ/ŶĂĚŽŵĞƐƟĐĞŶǀŝƌŽŶŵĞŶƚƚŚŝƐ
product may cause radio interference in which the user
may be required to take adequate measures.

Loading the Roll

Loading the Ribbon

EŽƚĞWůĞĂƐĞƌĞĨĞƌƚŽǁŝŶĚŽǁƐĚƌŝǀĞƌŝŶƐƚĂůůĂƟŽŶŝŶŝdϰhƐĞƌDĂŶƵĂů
1.Press to open the printer cover and
mechanism.
2.Pull the roll holders open and place
the roll between them.Press down the
locking tab.
3.Pass the labels through label guides
and adjust label guides to label’s width.
1.Install the ribbon module. Ϯ/ŶƐĞƌƚƚŚĞůĞŌƉĂƌƚŽĨƐƵƉƉůLJƐƉŝŶĚůĞ
and then the right part spindle.
3.Press down the printer mechanism.
6.Press down the mechanism and close
the cover.
ϰ/ŶƐĞƌƚƚŚĞůĞŌƉĂƌƚŽĨƌĞǁŝŶĚƐƉŝŶĚůĞ
and then the right part.
5.Wind the core 2~3 ciPress down the
mechanism and close the cover.
3.Connect the other end of power cord to the outlet.
2.Connect the power cord to AC adapter.
1.Connect the AC adapter to power receptacle.
Varies by regions
Ribbon Supply Spindle
Ribbon Rewind Spindle
^ƟĐŬƵƉ
WŽǁĞƌŽŶŶĞĐƟŽŶ
ĂƵƟŽŶƚŚĞƚĞĂƌďĂƌ
of this printer contains
a sharp edge. Please
do NOT touch it.