iDPRT SP406 User manual
-1-
SP406
-2-
Top Cover External Paper Roll Inlet
Kick-stand Cover Lock
Folding Paper Storage
External Paper Roll Holder
Standard
Quick Start Guide
Rev.1.0
Packing List
Printer Power Cord
USB Cable Quick Start Guide
！
！
Front View Rear View
Inside View
(Status Indicator)
Cover Open Levers
Power Switch
USB PortPower Receptacle
Moveable Label Guides
Platen
Print Head Module
Movable Paper Sensor
CD
product may cause radio interference in which the user
may be required to take adequate measures.
Xiamen Hanin Electronic Technology Co., Ltd.
ADD：No.96, Rongyuan Rd., Tong’an District, Xiamen, China 361100
WEB：www.idprt.com
-3- -4-Rev.1.0
Power Cord
2
3
1
OFF ON
！
！
1. Turn the power on, adjust the paper
2. Insert the paper into the entry slot.
3. The paper will be inhaled into the path
2.Connect the power cord to power receptacle.
3.Connect the other end of power cord to the outlet.
Feed a label/a line
depending on the media you use.
Print self-test page
Cr Ligt Descripn
Blue
Always on
The printer is ready
Purple
Always on
The print head is over heat
Always on
The cover is not closed
Red
Paper out
Label learning is abnormal
Orange
Always on
The printer is not ready yet
Paper jam, paper posion is abnormal
Always on
Printing
Green
Printing pause
Receiving data
Flash slowly
Flash slowly
Flash slowly
Flash rapidly
Flash rapidly
of this printer contains
a sharp edge. Please
do NOT touch it.
Other manuals for SP406
1
Other iDPRT Printer manuals
