IEI Technology DRPC-120-QGW User manual

Step1.
Hardware installation
Step 2.
Power on the system
Step 3.
Start using the system
Quick Start Guide
Pre-configured
DRPC-120-QGW
Welcome!
Thank you for choosing the pre-configured DRPC-120-QGW. You can set up the DRPC-120-QGW
in 3 simple steps and enjoy the powerful services.

Start using the systemStart using the system
1) Download the utility directly by using the following link.
http://www.qnap.com/utility
Click Qfinder to download and install the Qfinder utility
on your computer.
2) Run Qfinder to find your DRPC-120-QGW on the same network.
Double click the name of the DRPC-120-QGW to connect to the
web administration page and follow the instruction to run the
installation process.
3) Enter the default login name and password
User name: admin
Password: admin
Hardware installationHardware installation 1
1) Plug-in the power cord.
2) Connect the DRPC-120-QGW’s network
cable and make sure the DRPC-120-QGW,
PC or your home media devices are
connected to the same network or router.
2
Power on the systemPower on the system
3
Press the power button on the front panel
of the DRPC-120-QGW. It will take around
3 minutes to start up.
Congratulations! Your DRPC-120-QGW is now ready to use.
2
1