IFM EIO404 User manual

Operating instructions EN
Bluetooth Mesh base station
EIO404
80298783 / 00 08 / 2021

EIO404
Bluetooth Mesh base station
2
Contents
1Preliminary note...................................................................................................................................... 3
1.1 Symbols used............................................................................................................................... 3
1.2 Warnings used ............................................................................................................................. 3
1.3 Safety symbols on the unit ........................................................................................................... 3
1.4 Change history ............................................................................................................................. 3
2Safety instructions .................................................................................................................................. 4
2.1 Cyber security .............................................................................................................................. 4
3Intended use........................................................................................................................................... 5
3.1 Example of technical set-up ......................................................................................................... 6
4Connection possibilities.......................................................................................................................... 7
4.1 Ethernet interface with IoT core ................................................................................................... 7
4.2 Bluetooth ...................................................................................................................................... 7
4.3 Bluetooth Mesh ............................................................................................................................ 7
5Scale drawing ......................................................................................................................................... 8
6Installation .............................................................................................................................................. 8
6.1 General installation instructions ................................................................................................... 8
6.2 Mechanical design ....................................................................................................................... 8
6.3 Mounting options .......................................................................................................................... 9
6.3.1 Installation with angle bracket E80335 ................................................................................ 9
6.3.2 Installation with mounting device E803356.......................................................................... 9
6.3.3 Installation with fixing bars E80337 ..................................................................................... 9
7Electrical connection ............................................................................................................................ 11
7.1 Mounting the connector.............................................................................................................. 12
7.2 Removing the connector ............................................................................................................ 12
7.3 UL application area .................................................................................................................... 12
7.4 Cable length ............................................................................................................................... 12
8Indicators, output response and troubleshooting ................................................................................. 13
8.1 RGB indicators ........................................................................................................................... 13
8.2 RGB status indication, output response and troubleshooting .................................................... 13
9Parameter setting ................................................................................................................................. 14
9.1 Parameter setting with a PC via Ethernet: ................................................................................. 14
9.2 Parameter setting with a mobile device via Bluetooth ............................................................... 14
10 Set-up of the moneo configure application........................................................................................... 15
10.1 moneo configure function........................................................................................................... 15
10.2 System requirements ................................................................................................................. 15
10.3 Installation of moneo configure .................................................................................................. 15
10.4 Connection with a PC................................................................................................................. 15
11 Set-up of the moneo|blue application................................................................................................... 16
11.1 moneo|blue’s functions .............................................................................................................. 16
11.2 System requirements ................................................................................................................. 16
11.3 Installation of moneo|blue .......................................................................................................... 16
11.4 Connect a mobile device............................................................................................................ 16
12 Copyright and trademarks .................................................................................................................... 17
13 Approvals and certificates .................................................................................................................... 18
14 Maintenance, repair and disposal ........................................................................................................ 19

Bluetooth Mesh base station
EIO404
3
1 Preliminary note
You will find instructions, technical data, approvals and further information using the QR code on
the unit / packaging or at www.ifm.com.
1.1 Symbols used
Instruction requirement
Reaction, result
[...] Designation of keys, buttons or indications
Cross-reference
Important note
Non-compliance may result in malfunction or interference
Information
Supplementary note
1.2 Warnings used
1.3 Safety symbols on the unit
Observe instructions in chapter Electrical connection
1.4 Change history
Version
Subject
Date
00
New creation of the document
01/2022
EN
NOTE
Warning of damage to property
CAUTION
Warning of personal injury
Slight reversible injuries may result.
WARNING
Warning of serious personal injury
Death or serious irreversible injuries may result.

EIO404
Bluetooth Mesh base station
4
2 Safety instructions
► The unit described is a subcomponent for integration into a system.
–The system architect is responsible for the safety of the system.
–The system architect undertakes to perform a risk assessment and to create documentation
in accordance with legal and normative requirements to be provided to the operator and
user of the system. This documentation must contain all necessary information and safety
instructions for the operator, the user and, if applicable, for any service personnel
authorised by the architect of the system.
► Read this document before setting up the product and keep it during the entire service
life.
► The product must be suitable for the corresponding applications and
environmental conditions without any restrictions.
► Only use the product for its intended purpose ( Intended use).
► If the operating instructions or the technical data are not adhered to, personal injury and/or
damage to property may occur.
► The manufacturer assumes no liability or warranty for any consequences caused by
tampering with the product or incorrect use by the operator.
► Installation, electrical connection, set-up, operation and maintenance of the product must be
carried out by qualified personnel authorised by the machine operator.
► Protect units and cables against damage.
► Replace damaged units, otherwise the technical data and safety will be impaired.
2.1 Cyber security
The device may only be used under the operating conditions specified in the data sheet.
NOTE
Device operation in an unprotected network environment.
Unauthorised read or write access to data is possible.
Unauthorised manipulation of the device function is possible.
Restrict access to authorised users (e.g. password-protected access).
New password assignment for Bluetooth access.

Bluetooth Mesh base station
EIO404
5
3 Intended use
The base station EIO404 communicates via Bluetooth Mesh with e.g. the Bluetooth Mesh
Adapter EIO344.
The base station can be configured via Bluetooth and an APP.
All available functions can be accessed via moneo|blue. The APP is available for Android
and IOS in the App Store.
Likewise, configuration is also possible via the Ethernet interface.
The Bluetooth Mesh adapters can be integrated via the two configuration options.
The unit is not suited for environments with particular requirements on mechanical stability
(e.g. shock/vibration).
The unit is intended for indoor use only.
► Observe the operating conditions (Technical data at www.ifm.com)
► IP67 protection rating
The received process data is used for plant monitoring
EN

EIO404
Bluetooth Mesh base station
6
3.1 Example of technical set-up
Fig. 1: Application example
1: Power supply
2: Laptop with moneo or Gateway
3: EIO404 base station
4: Mobile device with moneo|blue via Bluetooth LE
5: Example sensor
6: BT Mesh adapter (e.g. EIO344) via BT Mesh
7: PLC to receive switching signals
1
2
3
4
6
5
7

Bluetooth Mesh base station
EIO404
7
4 Connection possibilities
The EIO344 has several connection possibilities, which also include various functions.
4.1 Ethernet interface with IoT core
The device has an Ethernet interface.
M12 socket
► Ethernet communication (data acquisition)
► Parameter setting of BT-Mesh network
► Parameter setting of Ethernet interface
► Setting of further parameters
Ethernet is a globally standardised technology (ISO/IEC 11801) for communication.
4.2 Bluetooth
The following functions are supported with a mobile device:
► Parameter setting of BT-Mesh network
► Parameter setting of Ethernet interface
► Setting of further parameters
M12 connector
èPower supply
4.3 Bluetooth Mesh
Once Bluetooth Mesh is set up, the EIO404 automatically establishes the connection to the
BT Mesh Adapter (EIO344).
The BT Mesh adapter must be integrated into the BT Mesh network for this purpose.
See EIO344 operating instructions www.ifm.com.
Up to 50 BT Mesh adapters can be connected to the BT Mesh base station.

EIO404
Bluetooth Mesh base station
8
5Scale drawing
The max. tightening torque of the screws when mounting the unit is 0.8 Nm.
6Installation
6.1 General installation instructions
When mounting several systems adhere to the minimum distances.
The max. tightening torque of the screws when mounting the unit is 0.8 Nm.
Use M4 screws.
The maximum insertion depth is 15 mm.
Information on the available mounting accessories is available on our website at www.ifm.com
6.2 Mechanical design
The connections can be rotated by 270°

Bluetooth Mesh base station
EIO404
9
6.3 Mounting options
For installation, the following optional accessories are available.
The device can be mounted without the accessories. For installation, please use the threaded
sleeves on the back of the unit. The required screws are not supplied with the device.
6.3.1 Installation with angle bracket E80335
► The angle bracket is for lateral mounting of the unit.
6.3.2 Installation with mounting device E803356
The mounting device is used to mount the device to a clamp.
The following clamps can be used:
► E21110 with a rod diameter of 12 mm
► E20795 with a rod diameter of 14 mm
► E21109 with a rod diameter of 14 mm
6.3.3 Installation with fixing bars E80337

EIO404
Bluetooth Mesh base station
10
► Fix the unit with fixing screws to the designated location.