IKEA E2112 User manual

VINDSTYRKA

1x

1

Min. 10 cm
(Min. 4")

STARKVIND STARKVIND

3 sec 3 sec
3 sec

DIRIGERAVINDSTYRKA

English 12
Deutsch 20
Français 28
Nederlands 36
Dansk 44
Íslenska 52
Norsk 60
Suomi 68

Svenska 76
Español 84
Portugues 92
Ελληνικά 100
Türkçe 108
 116
Italiano 124

12English
Instructions for use
Freestanding or paired
VINDSTYRKA air quality sensor can be used
freestanding, but also be connected to
STARKVIND air puriers and/or DIRIGERA hub for
smart products.
ConnectVINDSTYRKAtoSTARKVINDairpurier
Long press the pairing buttons on VINDSTYRKA and STARKVIND at
the same time to connect them. See pages 6-7.
When the connection is successful, the pairing icon should stop
blinking on the display.
Recommended power supply:
5.0 VDC, 1.0 A (Not included)
Connect VINDSTYRKA to DIRIGERA hub
By connecting VINDSTYRKA to DIRIGERA hub, you'll be
able to see the room’s air quality in the IKEA Home smart
app.
Pairing button
Mode button

13
If you have an iOS device:
Go to the App Store and download the IKEA Home smart app. The
app will show you how to connect VINDSTYRKA to DIRIGERA hub.
If you have an Android device:
Go to Google Play and download the IKEA Home smart app. The
app will show you how to connect VINDSTYRKA to DIRIGERA hub.
Pairing: Connecting VINDSTYRKA air quality sensor to
DIRIGERA hub and STARKVIND air purier.
• When the pairing mode is activated, the pairing icon on the
display should blink until VINDSTYRKA is connected to the air
purier or the hub.
• When VINDSTYRKA is connected to 1 air purier, the following
icon should be active on the display.
• When VINDSTYRKA is connected to more than 1 air purier, the
following icon should be active on the display.
• When VINDSTYRKA is connected to DIRIGERA hub, only the
pairing icon should be visible on the screen.

14
Display on VINDSTYRKA
Shows connected air puriers.
Displays level of PM2.5 particles.
PM2.5 are small inhalable particles, particles with a
max. size of 2.5 micrometres.
Green: 0-35 µg/m3, Yellow: 35-120 µg/m3,
Red: >120 µg/m3.
Room temperature
Room relative humidity
Temperature and humidity can aect the indoor
comfort and wellbeing.
Indicates increasing, stable or decreasing level of
TVOC.
TVOC stands for “Total Volatile Organic
Compounds” (VOC).

15
Settings mode
A long press on the mode button will enter the Settings mode.
Brightness
A ashing symbol means that it is possible to adjust the
brightness level.
Press the mode button to select between level 1, 2, and 3.
A long press on the mode button conrms the setting and takes
you to the settings for temperature.
Autoo: After 1 minute, the display brightness will return to its
default setting (level 2).
Temperature unit
A ashing symbol means that it is possible to adjust the
temperature.
Press the mode button to switch between Celsius and
Fahrenheit.
A long press on the mode button conrms the setting and takes
you back to the Settings mode.

16
Important!
• The product is only intended for household use under normal
operating conditions.
• Do not block the air intakes and outlet in the rear.
• Do not leave the product in direct sunlight or near any heat
source, as it may overheat.
• The wall socket must be located near the equipment and must be
easily accessible.
• Do not subject the product to wet, moist or excessively dusty
environments since this can cause damage to the unit.
• Children should be supervised to ensure they do not play with
the product.
• The product does not measure carbon monoxide (CO) or radon
(Rn). It cannot be used as a safety device upon accidents involving
combustion processes and hazardous chemicals.
• Be sure to not exceed the maximum USB cable length
recommended for the device.
• Never use a damage or faulty USB cable, since this can damage
or harm the power adapter or your product.

17
• Unplug the product from the power source before cleaning and
when it is not in use.
Save these instructions for future use.
Factory reset
Quick-press the pairing button 4 times to perform a factory reset.
Care instructions
Wipe with a soft cloth moistened with a little mild detergent.
Use another soft, dry cloth to wipe dry.
Note!
Never use abrasive cleaners or chemical solvents as this can
damage the product.
Product servicing
Do not attempt to repair this product yourself, as opening or
removing covers may expose you to dangerous voltage points or
other risks.

18
Technical data
Model: VINDSTYRKA air quality sensor
Type: E2112
Input: 5.0 VDC, 1.0 A, 0.5 W, USB-C
Particle detection range: 0~1000 µg/m3
Radio range: 10 m in open air
Operating frequency: 2400~2483.5 MHz
Output power: 8 dBm
Operation temperature: 0°C to 40°C
Operating humidity: 0 to 95% RH
Max USB cable length: 3.0 m/9’8”
Indoor use only
Manufacturer: IKEA of Sweden AB
Adress: Box 702, SE-343 81 Älmhult, SWEDEN

19
The crossed-out wheeled bin symbol indicates that the item should
be disposed of separately from household waste. The item should
be handed in for recycling in accordance with local environmental
regulations for waste disposal. By separating a marked item from
household waste, you will help reduce the volume of waste sent to
incinerators or land-ll and minimize any potential negative impact
on human health and the environment. For more information,
please contact your IKEA store.

20Deutsch
Gebrauchsanleitung
Freistehend oder gekoppelt
Der VINDSTYRKA-Luftqualitätssensor kann
freistehend verwendet werden, aber auch
an STARKVIND-Luftreiniger und/oder für
intelligente Produkte auch an den DIRIGERA-Hub
angeschlossen werden.
Verbinden des VINDSTYRKA mit dem STARKVIND-Luftreiniger
Drücke lange gleichzeitig die Kopplungstasten von VINDSTYRKA
und STARKVIND, um sie zu verbinden. Siehe Seiten 6-7.
Wenn die Verbindung erfolgreich hauptsächlich ist, sollte das
Kopplungssymbol auf dem Display aufhören zu blinken.
Empfohlene Stromversorgung:
5,0 VDC, 1,0 A (nicht im Lieferumfang enthalten)
Verbinden des VINDSTYRKA mit dem DIRIGERA-Hub
Wenn du VINDSTYRKA mit dem DIRIGERA-Hub verbindest,
wird die Luftqualität des Raums in der IKEA Home Smart
App angezeigt.
Kopplungstaste
Modustaste