IKEA VINDSTYRKA User manual

VINDSTYRKA

1x

1

Min. 10 cm
(Min. 4")

STARKVIND STARKVIND

3 sec 3 sec
3 sec

DIRIGERAVINDSTYRKA

English 10
Français 26
Español 42

10English
Instructions for use
Freestanding or paired
VINDSTYRKA air quality sensor can
be used freestanding, but also be
connected to STARKVIND air puriers
and/or DIRIGERA hub for smart
products.
Connect VINDSTYRKA to STARKVIND air purier
Long press the pairing buttons on VINDSTYRKA and
STARKVIND at the same time to connect them. See
pages 6-7.
When the connection is successful, the pairing icon
should stop blinking on the display.
Pairing button
Mode button

11
Recommended power supply:
5.0 VDC, 1.0 A (Not included)
Connect VINDSTYRKA to DIRIGERA hub
By connecting VINDSTYRKA to DIRIGERA hub,
you'll be able to see the room’s air quality in
the IKEA Home smart app.
If you have an iOS device:
Go to the App Store and download the IKEA Home
smart app. The app will show you how to connect
VINDSTYRKA to DIRIGERA hub.
If you have an Android device:
Go to Google Play and download the IKEA Home
smart app. The app will show you how to connect
VINDSTYRKA to DIRIGERA hub.

12
Pairing: Connecting VINDSTYRKA air quality
sensor to DIRIGERA hub and STARKVIND air
purier.
• When the pairing mode is activated, the
pairing icon on the display should blink until
VINDSTYRKA is connected to the air purier or the
hub.
• When VINDSTYRKA is connected to 1 air purier,
the following icon should be active on the
display.
• When VINDSTYRKA is connected to more than 1 air
purier, the following icon should be active on
the display.
• When VINDSTYRKA is connected to DIRIGERA
hub, only the pairing icon should be visible on the
screen.

13
Display on VINDSTYRKA
Shows connected air puriers.
Displays level of PM2.5 particles.
PM2.5 are small inhalable particles,
particles with a max. size of 2.5
micrometres.
Green: 0-35 µg/m3, Yellow: 35-120 µg/m3,
Red: >120 µg/m3.
Room temperature
Room relative humidity
Temperature and humidity can aect
the indoor comfort and wellbeing.

14
Indicates increasing, stable or
decreasing level of TVOC.
TVOC stands for “Total Volatile Organic
Compounds” (VOC).
Settings mode
A long press on the mode button will enter the
Settings mode.
Brightness
A ashing symbol means that it is possible to
adjust the brightness level.
Press the mode button to select between level 1,
2, and 3.
A long press on the mode button conrms

15
the setting and takes you to the settings for
temperature.
Auto o: After 1 minute, the display brightness will
return to its default setting (level 2).
Temperature unit
A ashing symbol means that it is possible to
adjust the temperature.
Press the mode button to switch between Celsius
and Fahrenheit.
A long press on the mode button conrms the
setting and takes you back to the Settings mode.

16
Important!
• The product is only intended for household use
under normal operating conditions.
• Do not block the air intakes and outlet in the rear.
• Do not leave the product in direct sunlight or near
any heat source, as it may overheat.
• The wall socket must be located near the
equipment and must be easily accessible.
• Do not subject the product to wet, moist or
excessively dusty environments since this can
cause damage to the unit.
• Children should be supervised to ensure they do
not play with the product.
• The product does not measure carbon monoxide
(CO) or radon (Rn). It cannot be used as a safety

17
device upon accidents involving combustion
processes and hazardous chemicals.
• Be sure to not exceed the maximum USB cable
length recommended for the device.
• Never use a damage or faulty USB cable, since this
can damage or harm the power adapter or your
product.
• Unplug the product from the power source before
cleaning and when it is not in use.
Save these instructions for future use.
Factory reset
Quick-press the pairing button 4 times to perform a
factory reset.

18
Care instructions
Wipe with a soft cloth moistened with a little mild
detergent.
Use another soft, dry cloth to wipe dry.
Note!
Never use abrasive cleaners or chemical solvents as
this can damage the product.
Product servicing
Do not attempt to repair this product yourself, as
opening or removing covers may expose you to
dangerous voltage points or other risks.

19
Technical data
Model: VINDSTYRKA air quality sensor
Type: E2112
Input: 5.0 VDC, 1.0 A, 0.5 W, USB-C
Particle detection range: 0~1000 µg/m3
Radio range: 10 m in open air
Operating frequency: 2400~2483.5 MHz
Output power: 8 dBm
Operation temperature: 0°C to 40°C
Operating humidity: 0 to 95% RH
Max USB cable length: 3.0 m/9’8”
Indoor use only

20
Manufacturer: IKEA of Sweden AB
Adress: Box 702, SE-343 81 Älmhult, SWEDEN
This device complies with Part 15 of the FCC Rules.
This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation Science and
Economic Development Canada's licence-exempt
RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and
(2) this device must accept any interference