iLiving ILG8SF301 Installation instructions manual

Solar Attic Exhaust Fan/Ventilator
Model: ILG8SF303
1
This Solar Panel with Ecological Ventilator can be installed anywhere of a building. We herein just present 2
major mounting methods
Gable Wall application * Basement application and describe in 3 parts

Part I Installing the attic fan
Part II Mounting the Solar Panel
Part III Connecting Solar Panel to the attic fan
Part I: Fixing the Ventilator
1. Fix the ventilator to the wall using screws provided.
* Simply cut an opening at diameter of 12 inch / 14 inch before you start installing the unit!
* If you do not want to cut an opening on the wall, but make use of the old static openers, you can build a
wooden and fix the ventilator into that frame instead.
* Fan blades' orientation should be relatively outward of the house.
Ventilator
body
2
Ventilator
body
can be installed
in the wooden
frame
seal off the left
space with tar paper
or duct tape
2. he ventilator’s mounting brackets on sliding rails are flexible.
* Loosen screws to set the desired position of brackets first, then fix them with
bolts.
2 kinds of bolts are provided in package
for concrete wall mounting use
for wooden wall mounting use

Part II: Mounting the Solar Panel
he solar panel can be placed directly on building roof, or mount it onto the
wall. Regardless of which method you choose, please use the bolts & nuts provided
in the carton to secure the solar panel.
* The solar panel is fasten by all 4 inside from carton. Open it
by loosening one side screws, and take out the braces.
* When the mounting plate is installed, set up solar panel's
angle with those 2 braces.
for concrete wall mount
3
solar panel's angle braces
for wooden wall mount
* To prevent leaking, please apply enough waterproof
roofing sealant on the screw heads in mounting plate.

Part III: Connecting Solar Panel to the Extractor
When extractor & solar panel are both finished, the remaining task is to connect the wires!
* Be sure to do wiring properly with coaxial staples.
* To prevent water running down the wire into the house, please include a drip curve when securing the
wire to the wall!
4
after connected
coaxial staples + a drip curve

INSTALLATION ILLUSTRATION:
Gable mounting
(wooden frame might be adopted)
basement mounting
5
(wooden frame might be adopted)
solar panel mounted on roof solar panel mounted onto wall
wall mounting (more for industrial)

How long is the warranty?
This solar roof exhaust fan comes with a ONE-YEAR LIMITED COMPONENT
WARRANTY. If your unit does not appear to be working properly, please contact
our service center by calling 1-800-317-1688. Prior to your call, please have your
product’s model number, serial number, and purchase receipt/invoice ready so
that we may assist you more expediently.
6

iLIVING USA
239 Harbor Way
South San Francisco, CA 94080
Tel [phone]
Email [e-mail]
7
Like us on Facebook https //www.facebook.com/ilivingusa/
Follow us on Twitter @Ilivingusa
Check out our website www.ilivingusa.com