Infinity Evoke User manual

INFINITY EVOKE QUICK START GUIDE
MENU–Press this button in the main interface
to switch to the menu interface to set functions
of the massage chair. Press again when in
menu interface to return to main interface.
4
DIRECTIONAL BUTTON -This button
has 4 directions, up, down, left and right.
In menu it is a navigator button. Use up
and down to browse menu and left and
right to go to previous or next menu.
10
MULTI FUNCTION SCREEN –Menu
options and massages appear on this
screen.
1
3
2
8
2
6
5
QUICK RELAXATION –Press this button
to go directly into an 8 minute relaxation
program. Press it again to stop.
3
7
8
AIR INTENSITY–Press this button to choose
between 4 levels of air intensity in the airbag
massage. Check the multi-function screen to
see the adjustment.
4
10
9
BACKREST UP–Press this button to move
the backrest up and the legrest goes down.
Release it and the backrest and legrest hold in
position.
7
6
11
ZERO GRAVITY - Use this button to
engage Zero Gravity position. This chair
uses the NASA zero gravity principle,
keeping the legs higher than the heart,
imitating weightlessness. This position is
known to increase comfort and release
stress.
5
On/Off –Use this button to turn the
chair on and off. Remember to power off
The chair at the back of the chair to fully
power off the device.
LEGREST UP–Press this button to lift up
the legrest. Let go to stop and hold
legrest in position.
9
LEGREST DOWN–Press this button to lower
the legrest. Let go to stop and hold legrest in
position.
11
BACKREST DOWN –Press this button to
move the backrest down and the legrest up.
Release it and the backrest and legrest hold in
position.
12
12
AUTO–Use this button to switch auto
programs. Each time you click this button you
will select a new auto program.
1

INFINITY EVOKE
QUICK START GUIDE
Once your chair is plugged in and the power button on the rear lower panel is in the on
position, you can begin using your massage chair. Start by pressing the power button
on the lower section of your remote.
Auto Programs - You can choose one of the auto programs by selecting the Auto
button. The programs take you through a fully automated massage each addressing
your specific needs. The massage time can be adjusted by selecting the desired time
on the remote. Timer options are 10, 20, and 30 minutes.
Manual Massage - After pressing the power button you can press “menu” and select
“manual”. You may then select from one of the five massages styles 1) Shiatsu 2)
Kneading and tapping 3) Tapping 4) Knocking 5) Kneading
To enjoy a foot massage, activate the foot rollers in the menu. The three speeds can
be changed in this menu.
Select “Heat”from the menu to activate the Lumbar Heat. Allow a few minutes for the
heat benefits to be felt.
Timing –Select timing from the menu to select the massage time you like.
Language –Select language through the menu and select the preffered language for
the menus.
Air –Select Air from the menu and you can select where you want the airbag massage
to concentrate. You may select from Full Body, Upper Body, Arms & Seat, and legs &
feet. There are 4 levels of intensity available as well.
INFINITY EVOKE
QUICK START GUIDE
Infinite Therapeutics 68 Route 125 Kingston, NH 03848 [phone]