Ingenico group Move 3500 MIX User manual

What's in the box
Card Payment Terminal
Charging Base
Power supply unit
Ethernet Cable
PSTN Cable
Receipt Rolls
Window decal
Quick Reference Guide
1.
2.
3.
4.
5.
6.
7.
8.
Menu - Use this button to access the main
functions menu on the terminal
Cancel - Use this button to cancel and revert
back to the previous screen
Clear - Use this button to clear back or
delete characters when keying in
text/numbers
Enter - Use this button to confirm selection
on the terminal
Quick Start Guide
Move 3500 MIX
Function keys
1
3
5
4
6
8
7
2

Payment Acceptance is provided by EVO Payments International GmbH trading as BOI Payment Acceptance. Underwriting Criteria, Terms and Conditions
apply. EVO Payments International GmbH, trading as BOI Payment Acceptance is licenced by the Federal Financial Supervisory Authority BaFin
(Bundesanstalt fur Finanzdienstleistungsaufsicht) in Germany and is regulated by the Central Bank of Ireland for conduct of business rules. EVO Payments
International GmbH (trading as BOI Payment Acceptance) is not a member of the Bank of Ireland Group. BOI Payment Acceptance has entered into a
marketing alliance with the Bank of Ireland.BOI and the Tree of Life logo are trademarks of The Governor and Company of the Bank of Ireland and are being
used under licence by EVO Payments International GmbH, trading as BOI Payment Acceptance.
Support
BOIPA.com/customer-support [e-mail]
Getting started
Please connect the Power Supply unit to mains power close to the desired location of the
terminal. Connect the Power supply cable to the port shown and if Using Ethernet or PSTN,
please connect the cables to the Ports shown
Press the Menu Button
Select option “Connection Test”
Terminal Will Print a receipt with “Connection OK” printed near the top.
Your terminal is now ready to use
Once the Base and any additional cabling is connected, place the terminal in the charging
base and allow the device to power up. This will take approximately 2 minutes. The Terminal
will automatically pick-up the best mobile network available. If using an Ethernet connection,
the terminal should obtain a valid IP address and connection automatically once connected
to an Active Ethernet Port.
If you wish to connect to a Wi-Fi network, please follow these steps
1. Press the yellow button, this will request an administrator password which is 123456, and
press Enter to Confirm, and enter the Administrator Menu
2. Using the up/down keys scroll down to WIFI Profile option. Press Enter to confirm.
3. Select Scan Networks and press Enter. The terminal will scan for available Networks.
4. Select the name of your network. If your router/Modem has a 2.4G and a 5G channel
select the 2.4G option.
5. Enter your WIFI password using the keypad. Confirm the password is correct and press
Enter to Continue.
6. The Wi-Fi indicator on the top of the screen will turn green
To confirm your terminal is connected and ready to accept Payments, perform a connection
test using the following steps
1.
2.
3.
4.
Please consult your Quick reference guide provided for instructions on performing
transactions.