Insportline IN 9119UB40i User manual

1
USER MANUAL –EN
IN 9119 Exercise Bike inSPORTline UB40i
Made in P.R.C

2
CONTENTS
SAFETY CAUTION............................................................................................................................................... 3
EXPLODED VIEW ................................................................................................................................................ 4
PARTS LIST........................................................................................................................................................... 5
ASSEMBLY ........................................................................................................................................................... 8
KNOWING THE ICONSOLE.............................................................................................................................. 14
TRAINING INSTRUCTION................................................................................................................................ 18
TERMS AND CONDITIONS OF WARRANTY, WARRANTY CLAIMS ....................................................... 19

3
PREFACE
Let’s start a fearless adventure in knowing what to do when no one’s there telling you what to do.
BUT
Before that please read the following.
SAFETY CAUTION
This exerciser is made for home use only, and tested up to a max body weight of 120kg.
Follow the steps of the assembly instructions carefully.
Use only original parts as delivered.
Place this exerciser on an even, non-slippery surface. Because of possible corrosion, the usage of any
exerciser in moist areas is not recommended.
Before assemble it, check if delivery is complete by using the included parts-list.
For assembly, use only suitable tools and ask for assistance with assembly if necessary.
Check before the first training and every 1-2 month that all connecting elements are tight fitting and are
in the correct condition.
Replace defective components immediately and/or keep it out of use until repair.
For repairs, use only original spare parts.
In case of repair please ask your dealer for advice.
Ensure that training starts only after correct assembly and inspection.
For all adjustable parts be aware of the maximum positions to which they can be adjusted/tightened to.
This exerciser is designed for adults. Please ensure that children use the exerciser only under the
supervision of an adult.
Ensure that those present are aware of possible hazards, e. g. movable parts during training.
Warning: incorrect/excessive training can cause health injuries.
Please follow the advice for correct training as detailed in training instructions.
Consult your physician before starting with any exercise program. They can advise on the kind of
training and which impact is suitable.
This user manual is only for customers’reference.
The supplier cannot guarantee for mistakes occurring due to translation or change in technical
specification of the product.
All data displayed are approximate guidance and cannot be used in any medical application.
BEFORE EVERYTHING
It will affect your safety and the smoothness of this machine, as well as its life time.
Please check is there’s any parts missed.
Please assemble all the screws first.
After everything fixed, then make sure they’re firmly enough.

4
EXPLODED VIEW

5
PARTS LIST
NO.
DESCRIPTION
QTY
A
CONSOLE
1
A-1
SCREW M5X10L
4
B
HANDLEBAR SET
1 (set)
B-1
HAND-PULSE
2
B-2
FOAM GRIP
2
B-3
CAP
2
B-4
CONNECTION WIRE
1
C
HANDLEBAR POST
1
C-1
HANDLEBAR POST COVER
1
C-2
CURVED WASHER ø8xφ19x2t
4
C-3
SCREW M8xP1.25x16L
4
C-4
CABLE
1
D
FRONT STABILIZER SET
1 (set)
D-1
FRONT CAP (LEFT)
1
D-2
SCREW M8xP1.25x40L
2
D-3
TRANSPORTATION WHEEL ø57xφ8x20
2
D-4
NYLON NUT M8
2
D-5
FLAT WASHER ø8*φ19*2T
2
D-6
FRONT CAP (RIGHT)
1
E
MAINFRAME
1 (set)
E-1
CABLE
1
E-2
SEAT POST BUSHING
1
E-3
DRIVING BELT
1
E-4
CHAIN COVER (R+L)
1 (set)
E-5
SEAT POST KNOB
1
E-6
SCREW M4x50L
6
E-7
CRANK ARM (R+L)
1 (set)
E-8
CAP FOR CRANK ARM
2
E-9
FLANGE BOLT M8
2
E-10
SCREW
6
E-15
SENSOR HOLDER
1
E-16
SENSOR
1
E-17
SCREW
1
E-18
DC WIRE
1
F
PEDAL (R+L)
1 (set)
G
REAR STABILIZER
1 (set)

6
G-1
SCREW
8
G-2
REAR CAP (LEFT)
1
G-3
ADJUST CAP
2
G-4
REAR CAP (RIGHT)
1
H
HORIZONTAL SEAT POST SET
1 (set)
H-1
SADDLE
1
H-2
SEAT SLIDER
1
H-3
CAP
1
H-4
SOCKET
1
H-5
FLAT WASHER ø14.3xφ25x2.0t
1
H-6
SEAT SLIDER KNOB
1
H-7
SEAT POST COVER
1
H-8
SCREW M5xP0.8x6L
2
H-9
SCREW M4x15L
1
I
HARDWARE
1 (set)
I-1
SCREW M8xP1.25x20L
8
I-2
FLAT WASHER ø8*φ19*2T
8
I-3
COVER
1
I-4
SPRING WASHER ø7x2t
1
I-5
FLAT WASHER ø7xφ12x1t
1
I-6
BUSHING ø7xφ12x25mmL
1
I-7
T-TYPE KNOB M7xP1.0x55L
1
J
AXLE
1
J-1
HEXAGONAL SCREW M8xP1.25x12Lx5t
3
J-2
DRIVING PULLEY
1
J-3
BUSHING ø22xφ17x7.5mmL
1
J-4
BEARING 6203RS
2
J-5
FLAT WASHER ø17.5xφ25x0.3t
3
J-6
CURVED WASHER ø17.5xφ25x0.3t
1
J-7
C-TYPE RING
1
K
ADAPTOR
1
L
SHAFT
1
L-1
SPRING
1
L-2
FLAT WASHER ø8.5xφ25x1t
1
L-3
HEXAGON SCREW M8xP1.25x20L
1
L-4
IDLE WHEEL ø24xφ37x20.5mm
1
L-5
NYLON NUT M8
1
L-6
FLAT WASHER ø6xφ12x1t
1

7
L-7
HEXAGON SCREW M6xP1.0x12L
1
M
FLYWHEEL SET
1 (set)
M-1
FLYWHEEL
1
M-2
BEARING 6300RS
1
M-3
ONE WAY BEARING
1 (set)
M-4
BEARING 6203RS
1
M-5
AXLE SHAFT
1
M-6
FLAT WASHER ø30xφ34x1t
1
M-7
SMALL PULLEY
1
M-8
BEARING 6000RS
1
M-9
NUT
6
M-10
STAR WASHER
2
M-11
BUSHING
1
M-12
BEARING 6003RS
1
M-13
BUSHING
1
N
GEAR BOX
1
N-1
SHAFT FOR GEAR BOX
1
N-2
MAGNET SET
1
N-3
SPRING WASHER
2
N-4
FLAT WASHER
2
N-5
SCREW
2
N-6
SCREW
1
N-7
NUT
1

8
ASSEMBLY
STEP 1
Assemble the front & rear stabilizer (D & G) with screw & washer (I-1 & I-2).

9
STEP 2
1. Screw the pedals (F-R/L) onto the crank. The pedals are marked with R and L at the screw.
2. Tighten the left pedal anti-clockwise, the right pedal clockwise.

10
STEP 3
1. Assemble the saddle (H-1) with horizontal slider (as the small drawing).
2. Insert the seat post (H) in the main frame, choose the situation position and tighten the locking knob
aside the cover. Ensure the knob is always tightened.