Intermec 3240 User manual

3240
Batch Takeup
Accessory
Instruction
Sheet
Parts Provided:
• Batch Takeup Hub
• Media Guide Plate
• Media Clamp
Note: The batch takeup accessory rewinds small
batches of labels as they are printed by the 3240
printer. Space inside the printer allows the batch
takeup accessory to rewind batches of approximately
1500 inches of media.
Step 1
Install the media guide plate onto the
media access door
1. Remove the media cover.
2. Remove the rewinder clasp from the rewinder hub.
3. Install the media guide plate to the front of the
media access door.
Power
Intermec
3240
Alert
Feed/Pause
3240I.001
IntermecIntermec
3
Empty/Pause
Media guide
plate Media access
door
Rewinder
hub
Rewinder
clasp
➤

Step 2
Install the batch takeup
reel
1. Line up the grooves in the batch
takeup hub with the grooves on
the rewinder hub.
2. Slide the batch takeup hub all
of the way onto the rewinder
hub until it snaps in place.
Step 3
Loading the media
1. Refer to “Loading a Roll of Media” in the 3240 User’s
Manual for media loading instructions.
2. Pull at least 12 inches of media out beyond the printhead.
3. Route the media around the media guide plate
and through the opening in the media access door.
4. Wind the media clockwise around the batch
takeup reel and install the media clamp
onto the batch take up reel.
5. Rotate head lift lever counterclockwise to lower printhead.
Intermec Corporation
6001 36th Avenue West
P.O. Box 4280
Everett, WA 98203-9280
PN 063017-001
Power
IntermecIntermec
3240
Alert
Feed/Pause
3240I.003
Intermec
3
Empty/Pause
➤
➤
➤
➤
➤
➤
Media
Batch
takeup reel
Media guide
plate
Media clamp
Head lift
lever
Power
Intermec
3240
Alert
Feed/Pause
3240I.002
Intermec
3
Empty/Pause
Batch
takeup
hub
Rewinder
hub