Intex Lumo SLS360 User manual

WARNING: Read and become familiar with this manual BEFORE operating unit.

Intex Lumo® intexinternational.com
2
Intex Lumo®
360˚ LED Floodlight
Attachment
Product Description:
Designed to convert Intex Lumo® Worklights into 360° Floodlights, providing cool
non-glare illumination throughout the entire environment whilst delivering true
representation of colours and optimised colour temperature, improving lighting effect
and efficiency. Compatible with SLB4000, SLP4000 & SLP6000.
Instructions:
Target the triangle mark on the Floodlight
with the one on the Worklight.
Rotate the Floodlight clockwise to fix them together.
To remove rotate the Floodlight anti-clockwise.
STEP 1
STEP 2
STEP 3

3
WARNING: To reduce the risk of injury,
user must read and understand operation manual.
SLS360 Specifications:
Impact Resistance Rating IK07
Storage Temperature -20° to 50°
Working Temperature -10° to 35°
Weight (kg) 0.53
Dimensions (mm) 226 x 179 x 69
Warranty 12 Months
Contents:
LED Floodlight Attachment
Instruction Manual
Warnings:
- Wear safety goggles whist operating (user and bystanders).
- Avoid looking directly into the beam.
- Do not use the Worklight near open flames.
- Do not cover the lens whilst operating to prevent overheating.
- Do not contaminate the lens with organic solvents.
- Take care to position the Worklight in a careful manner,
ensuring the light is properly supported by the stand.
- When using at a height of 3m or greater, take extra precaution to prevent
falling objects causing harm to bystanders and or nearby equipment.

Lumo® is a registered Trademark of Intex International
The information contained in this brochure was correct at the time of printing. E&OE
MANSLS360 Version:05/20
intexinternational.com