Invacare DOLOMITE JAZZ Troubleshooting guide

1
Art no 1542536-1
2011-04-26
Service instructions
FUTURA, LEGACY, SYMPHONY, MAXI, MAXI +
Instructions for service on DOLOMITE Jazz rollator
The following check-ups and controls are to be done when maintaining the Dolomite Jazz rollator
Examine that/if: To do: Comments: OK
1The wheel spins easily. Change the wheel and locking nut.
2The tread is not damaged. Tighten the bolts, (use permanent locking
glue if locking nut is not available). Use new locking nut!
3The wheel bolts are properly tight-
ened.
Tighten the bolts, (use permanent locking
glue if locking nut is not available). Use new locking nut!
4The screws on rear forks are tight-
ened. Tighten the screws.
5The front fork is properly assem-
bled into the frame.
Tighten the front fork in the frame with
60 Nm.
6The front fork has no damages. Change the fork. Tighten the front fork in
the frame with 60 Nm.
7The rear fork has no mechanical
damages. Change the fork.
8All wheels have contact with plane
surface.
Adjust the rear wheel by moving rear fork
up or down.
WHEEL/FORKS
Examine that/if: To do: Comments: OK
1The brake flap is not worn out. Exchange brake flap
2The brake flap returns after braking. Change the brake flap or wire and cover. (spring can be jammed)
3The brake wire moves easily in the
wire cover. Change wire and, if needed, cover.
4Full braking action is obtained. Adjust the braking action with the wire
adjusting screws.
The distance between the
brake flap and the wheel
must not exceed the follow-
ing meassurements:
Futura with DABS II fork:
2 mm
Legacy with DABS fork:
2,5 mm
Legacy with DABS II fork:
4 mm
5End parts on wire-covers are not
damaged. Change the wire cover.
6Brake handle/housing is not
damaged. Change the brake handle.
BRAKE

2
Art no 1542536-1
2011-04-26
Service instructions
FUTURA, LEGACY, SYMPHONY, MAXI, MAXI +
Examine that/if: To do: Comments: OK
1The handgrips not are damaged. Change grip / grips.
2The hand grips can not be easily
rotated.
Change grip. Clean the tube with a
grease solvent that does not contain
oil, an example of suitable liquid is
windscreen cleaning fluid.
HANDGRIPS
Examine that/if: To do: Comments: OK
1There are no damages on coating. Repair damages on coating with Dolo-
mite touch-up colour.
2There are no mechanical damages on
the frame. Scrap the rollator.
3The handle tubes are not bended. Change the handle tube.
FRAME
INVACARE DOLOMITE AB, Box 200, 343 75 DIÖ, SWEDEN
TEL [phone], FAX [phone]
Examine that/if: To do: Comments: OK
1The rollator locks and remains in
unfolded position.
Change the folding mechanism parts
(plastic rail and spring) if these are dam-
aged.
2The joint bolt is properly tightened. Reassemble the bolt, use permanent
thread locking glue.
3Safety latch is not damaged or
deformed. Change safety latch and pin.
4The magnet strip on the safety latch
is working. Mount a new magnet strip.
FOLDING MECHANISM
Examine that/if: To do: Comments: OK
1The knobs are locking the handle
tube properly. Change the knobs and locking sleeves.
ADJUSTMENT KNOBS
CONTROL OF ROLLATORS AS ABOVE ROUTINES SHALL BE CARRIED OUT REGULARLY.
THE FREQUENCY SHALL BE RELATED TO THE INTENSITY OF USE AND WHAT STRESS
THE ROLLATOR HAS BEEN EXPOSED TO.
Service made by:
Name:
Date:
Rollator model:
Sign:
Serial number: