Invacare Spectra Blitz User manual

1
Invacare®Spectra BlitzTM
User guide

2
ISO 7176 PART 15
REQUIREMENTS FOR INFORMATION DISCLOSURE,
DOCUMENTATION AND LABELLING
MODEL DESIGNATION: Spectra BLITZ POWERCHAI
R
ISO TEST
METHOD REQUIREMENT MIN MAX ISO TEST
METHOD REQUIREMENT MIN MAX
ISO 7176 Pt
5Overall Length with Legrest 835mm 940mm ISO 7176
Pt 7 Seat Angle Plane minus
5.5° 60°
ISO 7176 Pt
5Overall Width 560mm 560mm ISO 7176 Pt 7 Effective Seat Depth:
25cm depth 250mm 250mm
27.5cm depth 275mm 275mm
30cm depth 300mm 300mm
32.5cm depth 325mm 325mm
35cm depth 350mm 350mm
38cm depth 380mm 380mm
ISO 7176 Pt
5Folded Length 780mm 780mm ISO 7176 Pt 7 Effective Seat Width:
25cm wide 250mm 290mm
30cm wide 300mm 340mm
35cm wide 350mm 390mm
ISO 7176 Pt
5
Folded Width
560mm 560mm
ISO 7176
Pt 7
Seat Surface Height - Front
Edge:
45cm (Top of padded seat)
45cm (c/w cushions)
43cm (Top of padded seat)
43cm (c/w cushions)
495mm
545mm
475mm
525mm
495mm
545mm
475mm
525mm
ISO 7176 Pt
5Folded Height 910mm 910mm ISO 7176
Pt 7 Backrest Angle minus
8.5° 60°
ISO 7176 Pt
5Total Weight 79.5kg 79.5kg ISO 7176
Pt 7 Backrest Height 370mm 440mm
ISO 7176 Pt
1
Static Stability Downhill
28° 31°
ISO 7176
Pt 7
Footrest to Seat Distance:
Adj angle (13cm to 21cm): Top
of padded seatboard c/w
cushion Adj
angle (21cm to 30cm):
Top of padded seatboard
c/w cushion
140mm
190mm
210mm
260mm
220mm
270mm
300mm
350mm
ISO 7176 Pt
1Static Stability Uphill 9° 31° ISO 7176
Pt 7 Leg to Seat Surface Angle 90° 150°
ISO 7176 Pt
1
Static Stability Sideways 25.5° 25.5° ISO 7176
Pt 7
Armrest to Seat Distance:
Top of padded seatbord
c/w cushions
180mm
130mm
180mm
130mm
ISO 7176 Pt
2
Dynamic Stability Uphill 3° 10° ISO 7176
Pt 7
Front armrest to back rest:
Cushioned back
Tension back
270mm
320mm
270mm
320mm
ISO 7176 Pt
4
Energy Consumption Range 21.5Km 21.5Km ISO 7176
Pt 7
Horizontal Location of Axle:
Cushioned back
Tension back
95mm
45mm
95mm
45mm
ISO 7176 Pt
6Maximum Speed Forward 6.4Km/h ISO 7176
Pt 5 Minimum Turning Radius 620mm 620mm
ISO 7176 Pt
10 Obstacle Climbing 35mm 50mm ISO 7176
Pt 5 Turn Around Width Limiting
Walls 900mm 900mm
ISO 7176 Pt
3Minimum Braking Distance 1.06m 1.06m
Max. User Weight 75Kg
The Wheelchair conforms to the following standards :
ISO 7176 Pt 8 Static, Impact and Fatigue Strength YES
ISO 7176 Pt 9 Climatic Tests YES
ISO 7176 Pt 14 Power and Controls YES
ISO 7176 Pt 16 Resistance to Ignitio
n
YES

3
Warranty terms & conditions
Standard INVACARE Terms
This is to certify that your Spectra BlitzTM Powerchair is warranted by INVACARE Ltd., for a period of
2 years.
1. Only INVACARE chairs purchased at full price are warranted against defective workmanship and
materials.
2. If a defect or fault is discovered the INVACARE dealer from whom the appliance was obtained
should be notified immediately.
3. The manufacturer will not accept responsibility for damage caused by misuse or non-observ-
ance of the instructions set out in the users manual.
4. During the period of the Warranty, any parts that have become defective due to faulty workman-
ship or materials, will be renewed or repaired without charge by the INVACARE dealer.
5. The Warranty will be forfeited should any unauthorised alteration be made to the equipment.
6. The Purchaser’s statutory rights under the Consumer Protection Act are not affected.

4
Limitation of liability
This Warranty does not extend to the consequential costs resulting from fault clearance, in particular
freight and travel costs, loss of earnings, expenses etc.
• natural wear and tear
• inappropriate or incorrect use
• defective assembly or setting-up by the purchaser or third parties
• defective or neglectful treatment
• use of unsuitable spares

5
Contacting Invacare
For questions or support, please contact your authorised INVACARE Dealer. He has the necessary
know-how and equipment, plus the special knowledge concerning your wheelchair which enables him to
offer you an all-round satisfactory service.
Should you wish to contact us directly, we are at your service under the following addresses and
telephone numbers.
United Kingdom
INVACARE Ltd.
South Road · Bridgend Industrial Estate · Bridgend · Mid Glamorgan · CF31-3PY
Tel (Customer Service): 01656 - 647 372 Fax (Customer Service): 01656 - 649 016
France
INVACARE Poirier SAS
Route de St Roch (RD 36) F-37230 Fondettes
Tel (Service Après-Vente): 02 47 - 62 64 15 Fax (Service Après-Vente): 02 47 - 62 64 64
Germany
INVACARE Deutschland GmbH
Kleiststraße 49 · D-32457 Porta Westfalica
Tel (Kundendienst): 05731 - 754 210 Fax (Kundendienst): 05731 - 754 216

6
The Netherlands
INVACARE NEDERLAND
Celsiusstraat 46 · NL-6716 BZ Ede
Tel : +31 - (0) 318 - 550 056 Fax: +31 - (0) 318 - 555 054
Sverge & Suomi
INVACARE AB
Fagerstagatan 9 · P.O. Box 66 · S-163 91 Spånga
Tel (Kundjänst): 0583 -140 85 Fax (Kundjänst): 0583 -124 05
Spain
INVACARE S.A.
c/Areny, s/n, Poligon Industrial de celrà · 17460 Celrà (girona) - España
Tel. 0972 - 49 32 00 Fax: 0972 - 49 32 20
Italy
INVACARE Mecc San S.R.L.
Via Dei Pini, 62 I - 36016 Thiene (VI) - Italia
Tel: 0445 - 380059 Fax: 0445 - 380034
Portugal
INVACARE PORTUGAL Lda
Rua Senhora de Campanhâ, 105 4369-001 Porto - Portugal
Tel. 02 - 510 57 39 Fax: 02 - 510 50 20