Iridium 9505 Product information sheet

NOTE
: You can
not
send SMS to mobile
phones!
Send a message from an e-mail account:
To: [e-mail]
Limit 160 characters.
Send a message from the Iridium homepage:
http://messaging.iridium.com/
Limit 160 characters.
SMS between Iridium subscribers:
Select the menu option: “Message Editor”
Enter your message (User’s Guide page 104)
Select “OK”
Select the menu option:”Send Message”
Enter <Iridium phone number>
Select “Send Message”
Replying to a SMS:
Select “Received Messages”
Select your message
Select “Reply to Sender”
Enter the text
Select “Send Message”
You will be asked to enter the destination number with
the originator’s phone number pre-populated as the
destination number. If this is not the desired number,
then enter the correct one.
Send SMS message from 9505A phone to e-mail:
Press the Envelope key on the handset.
Use the Scroll Key to select the “Message Editor”.
Press “OK”
Enter the destination e-mail address, e.g.
[e-mail] (@ press “1” seven times)
Enter a blank space by pressing the # twice or down
arrow on the Scroll Key twice.
Enter message, press “OK”
Select “Send Message” by pressing “OK”
Destination number: +*2 or 00*2, then press “OK”
* = asterix left to the 0 button.
Displaying “Sending Message” and then “Message
sent” if successfully delivered.
Replying to an e-mail message:
Select “Received Messages”
Find the message.
Select “Reply to sender” write your message.
Select “Send Message” and +*2 will automatically be
added. Select Send Message.
Short user manual
Iridium Satellite Phone
Handheld
Motorola 9505/9505A
Polaris Electronics A/S
Kaerholt 1
DK-9210 Aalborg SO
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Home-page: www.polaris-as.dk

M
ak
ing
a phone call
from Iridium
to
cellular or mobile phone.
Always remember the country code, as Iridium is to
be seen as a country.
This means that even though you are in Denmark
you will have to use the country code +45.
Making a phone call to Iridium from
cellular or mobile phone.
Use the voicenumber +8816 xxx xxxxx.
Test the satellite phone - free of charge:
By dialling [phone] from the satellite
phone, you can verify that the phone is working
properly and familiarize yourself with the phone's
operation - all free of charge. You will hear a
recorded message confirming that the call was
completed and offering quick tips on proper
handset usage. This automated service allows you
to test the phone whenever and wherever you like.
Unblock the PIN.
If your PIN code is entered incorrectly three times
in a row, BLOCKED appears in the display. You
need to enter a PIN unblocking key (PUK1).
Press *, * , 0, 5, *
Enter the eight digit unblocking key (PUK1), and
press “OK”
Enter a new PIN code and press “OK”
Re-enter the new PIN code, and then press
“OK”
To set
-
up Iridium voicemail, please
follow the instructions below.
Ensure that your Iridium telephone has an active
SIM card installed and that the unit is switched on
and registered with the satellite.
Dial 0088 1662 990000 and press OK on your
Iridium handset. After a short pause you will hear
the message “You have now accessed the
Iridium messaging centre, please enter the
number of the person you are trying to reach.”
Dial your own Iridium telephone number in the
following format 8816 XXXX XXXX.
Your will hear the message “You have reached
the voicemail of 8816 XXXX XXXX.”
Before the message ends press * (asterix)
located on the bottom left hand of thekeypad.
You will hear the message “Please enter your
password”, which is the last seven digits of the
Iridium telephone number set as default
password. Typically this will be 1XXXXXX.
DO NOT PRESS “OK” AFTER ENTERING
YOUR PASSWORD
You have now accessed your Iridium messaging
service. By following the voice prompts, you can
personalise your outgoing message, change your
access password and customise many other
advanced features. To ensure full operation of
your Iridium handset you should: record an
outgoing message, change your access
password to an easy to remember 4 digit code
and record your name in the message
preferences when prompted. Now your Iridium
telephone is ready to receive messages.
NB “Pound” is an American expression to what we
know as the “#” key.
Voice mail services on Iridium
telephones can be switched on or off
by the user.
(Please note that the default setting for currently
available iridium equipment is “forward when
unavailable”)
This setting is accessed by selecting “call related
features” from the menu. Use cursor key scroll up
or down to “call forwarding”. Select view options,
if telephone is registered with the system and
with good signal strength, the status “call
forwarding” is displayed. It is then simply a case
of switching it on or off according to user
preference and wait for 30 seconds approx for
the system to update your choice.
The choice of call forwarding should be “forward
when unavailable” “voicemail”.
Service center
You might be asked to register this service
number in the phone: [phone]
Troubleshooting.
Try the manual.
Call Polaris Electronics A/S.
Call 2222 a call free number.
Do not use country code 00, because
then the number is NOT for free.