iwc IW3566 User manual

REF. 3566 / 4583
DA VINCI AUTOMATIC /
DA VINCI AUTOMATIC 36
REFERENCE 3566 / 4583
IWE04229/07.16/10.0www.iwc.com
OPERATING INSTRUCTIONS
使用说明
使用說明
取扱説明書
PETUNJUK PENGGUNAAN
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ
КЕРІВНИЦТВО З ВИКОРИСТАННЯ

— 3 —
— 5 —
OPERATING INSTRUCTIONS
English
— 29 —
使用说明
简体中文
— 43 —
使用說明
繁體中文
— 57 —
取扱説明書
日本語
— 71 —
PETUNJUK PENGGUNAAN
Bahasa Indonesia
— 85 —
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ
Русский
— 101 —
КЕРІВНИЦТВО З ВИКОРИСТАННЯ
Українська
DA VINCI AUTOMATIC
DA VINCI AUTOMATIC 36

— 5 —
DA VINCI AUTOMATIC
DA VINCI AUTOMATIC 36
Welcome to the small
circle of individuals who, if we are to
be absolutely precise, demand slightly
more of a watch than absolute preci-
sion. Appreciation of a watch is more
than mere appreciation of the correct
time. It is enthusiasm for an ingenious
idea. For the interplay between preci-
sion and imagination. Between time
and timelessness. Between bounda-
ries and infinity. Between laws to which
the entire world is subject, and taste,
which cannot be dictated to anyone.
That is why, since 1868, we have been
devoting rather more of our time to
watches that must not only run with
absolute precision but which also, with

— 6 —
DA VINCI AUTOMATIC
DA VINCI AUTOMATIC 36
every passing second, exert a fasci-
nation with the great achievements
of master craftsmanship: a fascina-
tion with new inventions of a technical,
material or formal nature, even if they
are concealed in minute details that are
perhaps not even visible. You are now
the owner of a beautiful new example
of this IWC tradition. We would like to
congratulate you on your choice and
send you our best wishes for the time
you will spend with your watch, which
perhaps cannot be described with any
greater accuracy than it is here.
IWC MANAGEMENT

— 7 —
DA VINCI AUTOMATIC
DA VINCI AUTOMATIC 36
THE TECHNICAL
REFINEMENTS OF THE
DA VINCI AUTOMATIC /
DA VINCI AUTOMATIC 36
Your IWC watch shows you the time in
hours, minutes and seconds, together
with the date. The mechanical move-
ment, which is timed in five positions,
with automatic winding, a temperature-
compensating balance spring made of
Nivarox
®
* of the highest quality and an
unbreakable Nivaflex
®
* mainspring,
has a power reserve of approximately
42 hours when fully wound.

— 8 —
DA VINCI AUTOMATIC
DA VINCI AUTOMATIC 36
Your Da Vinci Automatic/Da Vinci Auto-
matic 36 is protected by a sapphire
glass of hardness grade 9 on Mohs’
scale. Your watch is water-resistant
3 bar. To ensure that this extraordinary
watch continues to perform faultlessly
in the future, it is essential to observe
a few important operating instructions.

— 9 —
DA VINCI AUTOMATIC
DA VINCI AUTOMATIC 36
1Hour hand
2Minute hand
3Seconds hand
Date display 4
Crown 5
3
2
4
5
1
S
W
I
S
S
M
A
D
E
AUTOMATIC

— 10 —
DA VINCI AUTOMATIC
DA VINCI AUTOMATIC 36
FUNCTIONS OF
THE CROWN
0 — Normal position
1 — Date setting
2 — Time setting
AUTOMATIC
0 1 2

— 11 —
DA VINCI AUTOMATIC
DA VINCI AUTOMATIC 36
NORMAL POSITION
With the crown in the normal position
(0), you can also wind the automatic
movement by hand. A few revolutions
of the crown are enough to start the
movement. However, it is better to
wind the watch by turning the crown
through approximately 20 revolutions
as this will ensure maximum accuracy.
The crown must always be in position
0 when you are wearing your watch.

— 12 —
DA VINCI AUTOMATIC
DA VINCI AUTOMATIC 36
DATE SETTING
If a month has fewer than 31 days, you
will need to set the date manually to
the first day of the following month. Pull
the crown out to position 1. You can
now set the date by turning the crown
to the left (direct advance). You should
not use the rapid-advance function
between 8 p.m. and 2 a.m. because
the movement automatically advances
the date during this period.

— 13 —
DA VINCI AUTOMATIC
DA VINCI AUTOMATIC 36
TIME SETTING
Pull out the crown to position 2. This
will stop the movement. To set the
time accurately to the second, it is
best to stop the movement as the
seconds hand passes 60. Now move
the minute hand a few minute strokes
beyond the time to be set. Then posi-
tion the minute hand by moving it
gently backwards until it is exactly
above the correct minute stroke. This
ensures that the minute hand begins to
move immediately when you restart the
movement. To start the seconds hand,
push in the crown to position 0. When

— 14 —
DA VINCI AUTOMATIC
DA VINCI AUTOMATIC 36
setting the time, please be aware of
the date change, which always takes
place at 12 midnight. If this change
has already taken place at 12 noon,
you must move the hands forwards
by 12 hours.
ADJUSTING AND SETTING
THE METAL BRACELET
The metal bracelet has been designed
so that you can easily adjust it to the
size of your wrist. You can make this
adjustment yourself by removing or
adding individual bracelet links.

— 15 —
DA VINCI AUTOMATIC
DA VINCI AUTOMATIC 36
TAKING THE BRACELET
APART
Open the butterfly clasp and lay the
bracelet with the outside on a firm
base. To avoid scratching the brace-
let and base, place a cloth under-
neath the bracelet. Using the special
tool provided, you can now push down
the securing pin at the desired point of
separation and, at the same time, slide
the bracelet link outwards (1). Now
slide the opposing external bracelet
link away from the bracelet with both
the pivot pins, without pushing down
its securing pin (2). The bracelet is now
separated (3).

— 16 —
DA VINCI AUTOMATIC
DA VINCI AUTOMATIC 36
DETERMINING HOW MANY
LINKS TO REMOVE
Place the watch with the butterfly clasp
closed around your wrist and use the
overlap to estimate the number of sur-
plus bracelet links that you can now
remove as described below. If you
need to shorten the bracelet by sev-
eral links, we recommend removing the
same number of links from each half of
the bracelet, if possible, to ensure that
the clasp can be worn more or less in
the centre of the wrist.

— 17 —
DA VINCI AUTOMATIC
DA VINCI AUTOMATIC 36
Note the following: Generally the size
of your wrist will increase during the
course of the day, depending on tem-
perature and physical exertion.
13
2
5
4
6

— 18 —
DA VINCI AUTOMATIC
DA VINCI AUTOMATIC 36
REMOVING INDIVIDUAL
LINKS AND ATTACHING
THE BRACELET
Repeat steps 1 to 3 at the distance
from the first point of separation you
have just determined.
Remove the unnecessary links and
reassemble the shortened bracelet.
When reassembling the central link,
make sure that the outside is still facing
downwards.
Reinsert the external link with both the
pivot pins, which was removed at the
beginning, back into the bracelet (4).

— 19 —
DA VINCI AUTOMATIC
DA VINCI AUTOMATIC 36
Now you can slide the opposing exter-
nal bracelet link back into the brace-
let until it lies flush, by simultaneously
pressing down its securing pin (5).
To finish, check that the securing pins
are sitting correctly (6). These must be
brought up flush with the upper edge
of the external links.
Keep the surplus links and separat-
ing tool in a safe place for use in any
adjustment at another time.

— 20 —
DA VINCI AUTOMATIC
DA VINCI AUTOMATIC 36
INFORMATION ABOUT
MAGNETIC FIELDS
As a result of the ever greater prev-
alence in recent years of very strong
magnets made from rare-earth alloys
(for example neodymium-iron-boron)
– these are found in objects such as
loudspeakers, jewellery and fasteners
on mobile-phone cases and handbags
– mechanical watches are increas-
ingly likely to come into contact with
such magnets and be magnetized.
This can lead to the watch rate being
permanently affected, a problem that
can only be resolved by a process of
demagnetization carried out by a spe-
cialist. We recommend that you keep
your watch away from such magnets.