IWILL WO2 Original operating instructions

1
WO2/WO2-R Version 1.1B
Table of Content
FB11320100000
Quick Installation ................................................ 4
1.1 Layout............................................................................4
1.2 Item Checklist ...............................................................5
1.3 Jumpers ........................................................................5
1.4 Connectors ...................................................................9
1.5 Form Factor.................................................................19
Feature................................................................20
2.1 Motherboard Components Placement.....................20
2.2 Block Diagram ............................................................22
2.3 Specifications .............................................................23
Hardware Setup.................................................26
3.1 Before Installation ......................................................26
3.2 Install the Processor ..................................................27
3.3 Install Memory Modules ............................................32
3.4 CNR .............................................................................34
3.5 ATX Power Supply connector ...................................35
3.6 Back Panel ..................................................................37

Chapter 1 Quick Installation
2
BIOS Setup.........................................................40
4.1PhoenixNet Introduction.............................................40
4.2 BIOS Setup..................................................................43
4.3 Main Menu ...................................................................45
4.4 Standard CMOS Features ..........................................46
4.5 Advanced BIOS Features...........................................51
4.6 Advanced Chipset Features ......................................56
4.7 Integrated Peripherals................................................60
4.8 Power Management Setup.........................................68
4.9 PnP/ PCI Configurations ............................................73
4.10 PC Health Status ......................................................76
4.11 Iwill Smart Setting .....................................................76
4.12 Load Fail Safe Defaults ............................................80
4.13Load Optimized Defaults ..........................................81
4.14 Set Supervisor/ User Password Setting .................82
4.15 Save & Exit Setup .....................................................84
4.16 Exit Without Saving ..................................................85
On board Audio ..................................................86
5.1 Audio Features ...........................................................87
5.2 Driver Installation........................................................88
5.3 The Audio Rack ..........................................................92
5.4 The Application Program Setup ..............................102
5.5 About Recording 24bit Audio Setting .....................107

3
Chapter 1 Quick Installation
5.6 SPDIF/IN (SPDIF version only) ................................ 112
5.7 Loopback (bypass) mode Setup .............................116
Power Installar CD ..........................................120
6.1 Software Installation.................................................120
6.2 How to use the Power installer CD .........................120
6.3 How to make driver diskette ....................................121
6.4 Install Driver ..............................................................121
6.5 Install Software Utility...............................................124

Chapter 1 Quick Installation
4
1 Quick Installation
1.1 Layout
v

5
Chapter 1 Quick Installation
1.2 ItemChecklist
[V ] Themotherboard
[V ] Operationmanual
[V ] ATA/66/100 cable
[V ] Floppy cable
[V ] Power Installer CD
[V ] Internal COM port cable
Optional
[ ] USB riser kit
[ ] Thermal Sensor for System
[ ] Display Cache Riser Card
[ ] Infrared port cable
[ ] Display Cache Riser Card
[ ] Optional Module (SPDIF version only)
1.3 Jumpers
1.3.1Clear CMOS jumper(CMOS)
v

Chapter 1 Quick Installation
6
1.3.2 PS/2 power standby jumper (PS2_SB)
1.3.3Vcore booster jumper (Vcore)

7
Chapter 1 Quick Installation
1.3.4 VIO select jumper (VIO)
1.3.5Flash protect jumper (Flash)
v

Chapter 1 Quick Installation
8
1.3.6IDE RAID jumper(WO2-R Only)
1.3.7Audio jumper

9
Chapter 1 Quick Installation
1.4 Connectors
1.4.1CPU fan header (J39)
1.4.2Auxiliary fan header(J40)
1.4.3System fan header (J41)

Chapter 1 Quick Installation
10
1.4.4ATX power connector (J37)

11
Chapter 1 Quick Installation
1.4.5System temp. sensor header (Tsys)
1.4.6Chassis Intrusion header (Case)

Chapter 1 Quick Installation
12
1.4.7Infrared connector (IR)
1.4.8Front panel connector (J43)
v

13
Chapter 1 Quick Installation

Chapter 1 Quick Installation
14
1.4.9Wake-ON-LAN header
1.4.10 Internal Modem connector

15
Chapter 1 Quick Installation
1.4.11SMBus connector
1.4.12 Aux-In connector(Aux_IN)
1.4.13 CD_In connector(CD_IN)

Chapter 1 Quick Installation
16
1.4.14 Internal USB connector
The motherboard has two USB ports onboard. The extra two
USB support can only functionable with the additional USB
riser kit.
1.4.15 Internal connector for COM port.

17
Chapter 1 Quick Installation
1.4.16 SPDIF connector(Optional)

Chapter 1 Quick Installation
18
1.5 FormFactor

19
Chapter 1 Quick Installation

20
Chapter 2 Feature
2 Features
2.1 MotherboardComponents Placement