jbc SF-110VB User manual

Automatic Solder Feeder
Ref. SF-110VB/SF-210VB
www.jbctools.com

Packing List
The following items should be included:
Manual ...............................1 unit
Ref. 001633
Allen key Ø 1,5 ................1 unit
Ref. 0741610
SF Control Unit ............. 1 unit
Ref. SF-1B (100 -120V)
SF-2B (230V)
Allen key Ø 2,5 ................1 unit
R ef. 0 012574
Reel support ................ 1 unit
Ref. 0019301(x1)
0018033 (x1)
0003412 (x2)
Power cable .................... 1 unit
Ref. 0009417 (100V/120V)
0009401 (230V)
Spanner ............................ 1 unit
Ref. 0 017631
Guide Set ........................1 unit
Ref. GSF10V-B
Automatic Solder Feeder
Ref. SF-B
lock rings
Solder Feed
Handle .............................. 1 unit
Ref. SF280-A
2
www.jbctools.com

Power Socket
Fuse
RJ12 connection
for Robot System
RJ12 connection for Station
USB-B connector
Tin wire inlet
Features
Solder
Feed Handle
Ref. SF280-A
Control Unit
Main Switch
Control Screen
www.jbctools.com
3

Tool assembly
Connect the tool to the control unit.
1. Push the guide tube to the end
and tighten the screw.
2. Connect the jack.
Load the solder wire
1. Put the reel into its support.
2. Feed the wire into the input nozzle (2) until it reaches the wheels.
1
1
2
Input
nozzle
1
2
3. Use the Tin Reload Process
in Main Menu by pressing
the tool button.
4. Make sure the wire passes
through the nozzle.
insert to the end
4

Changing the wheels and the blade
1. Use the allen key and the spanner to loosen
the screws.
2. Replace the guide wheel and the blade for
the new ones.
Guide
wheel Blade
clamp
Blade
For this operation, disconnect the unit.
* Handle with care to avoid any cuts with the
blade because it is sharp.
2. You can easily adjust the length of the tube by opening the tube clamp.
Replacing the guide tube
1. Open the guide clamp, take off the guide tube and insert the new one.
For this operation, disconnect the tool from the control unit.
www.jbctools.com
5