Jcm global Ivizion2 series Quick setup guide

iVIZIONTM2 Series

Banknote Validator

Foundation of Intelligent Validation

Integration Guide

(Revision A)

This product document (hereinafter referred to as “Manual”) is fully covered by legal Copyrights owned by the JAPAN

CASH MACHINE CO., LTD. (hereinafter referred to as “JCM”) under Japanese laws and other Foreign Countries.

This Manual contains many copyrighted, patented or properly registered equipment items manufactured by JCM, that

are prohibited and illegal to duplicate, replicate, copy in whole, or in part, without the express authorization by JCM with

the following exceptions:

1. When an authorized JCM agency or distributor duplicates the Manual for sales promotion and/or service

maintenance of the product, or technical service personnel education as required; and

2. When an end user duplicates the Manual to maintain operation of the product or operate the product in general.

JCM retains all rights to amend, alter, change or delete any portion of this Manual in whole, or in part, or add items

thereto without notice regarding the product or its related products.

JCM is a registered trademark of JAPAN CASH MACHINE CO., LTD. All other product names mentioned herein may be

registered trademarks or trademarks of their respective companies. Furthermore, ™, ®and © are not always mentioned

in each case throughout this publication.

iVIZION™2 Series Banknote Validator Foundation of Intelligent Validation Integration Guide

International Compliance

• RoHS Directive

•UL & c-UL Marks

•CE Mark

•UKCA Mark

•CB Scheme

•FCC Directive

Electrical Current Symbol

Direct Current: indicates Direct Current values on product labels.

The JCM Website for patents is: http://www.jcm-hq.co.jp/english/patents/

REVISION HISTORY

Rev №.Date Reason for Update

A Nov. 18, 2022 Initial Document

or or or

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

FCC CAUTION

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to

operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the

FCC Rules.

These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used

in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to

correct the interference at his own expense.

This product must not be used in residential areas.

Issue #4126-IGEF-01-00

iVIZION™2 Series Banknote Validator

Foundation of Intelligent Validation

Table of Contents

Page

1 GENERAL INFORMATION ........................................................................................1

Description .........................................................................................................................1

iVIZION2 Unit ......................................................................................................................1

Product Descriptions.........................................................................................................2

Model Descriptions...............................................................................................................2

Software Descriptions ..........................................................................................................2

Precautions.........................................................................................................................3

Definitions for Warning, Caution and Note Signs.................................................................3

Definitions for General Symbols...........................................................................................3

User Cautions ......................................................................................................................3

Installation....................................................................................................................................... 3

Mounting, Dismounting & Transportation........................................................................................ 3

Placing Foreign Objects into the Unit.............................................................................................. 4

Operation ........................................................................................................................................ 4

Preventive Maintenance ................................................................................................................. 4

Banknote Fitness Requirements..................................................................................................... 5

Primary Features................................................................................................................5

Component Names ............................................................................................................6

2 SPECIFICATIONS ......................................................................................................8

Technical Specifications.......................................................................................................8

Environmental Specifications ...............................................................................................9

Electrical Specifications .....................................................................................................10

Structural Specifications.....................................................................................................10

RFID Specifications............................................................................................................10

3 INSTALLATION ........................................................................................................11

Installation Procedure .....................................................................................................11

Grounding ..........................................................................................................................11

External Harness Installation .............................................................................................11

iVIZION2 Installation ..........................................................................................................11

Side Installation............................................................................................................................. 11

Rear Installation ............................................................................................................................ 12

Security Lock Installation ...................................................................................................12

Unlock Procedure ......................................................................................................................... 12

Settings .............................................................................................................................13

Denomination Settings .......................................................................................................13

Interface Settings ...............................................................................................................13

Primary LED Indications..................................................................................................13

Recommended Wires.......................................................................................................14

With JCM External Harness ...............................................................................................14

Not using JCM External Harness.......................................................................................14

4 CONNECTOR PIN ASSIGNMENTS.........................................................................15

USB Connection.................................................................................................................15

Photo-Coupler Isolation Connection ..................................................................................16

Table of Contents

Page

iVIZION™2 Series Banknote Validator Foundation of Intelligent Validation

RS232C Connection ..........................................................................................................17

cc-Talk Connection ............................................................................................................18

TTL Connection..................................................................................................................19

Bezel Connector (CN7) ......................................................................................................20

5 PREVENTIVE MAINTENANCE ............................................................................... 21

Retrieving Banknotes .........................................................................................................21

Clearing a Banknote Jam...................................................................................................21

Cleaning .............................................................................................................................21

Cleaning Procedure .......................................................................................................................22

iVIZION2 Sensor Locations ...........................................................................................................23

6 INTERFACE SCHEMATIC CIRCUIT DIAGRAMS................................................... 25

USB Schematic Circuit Diagram ........................................................................................25

Photo-Coupler Isolation Schematic Circuit Diagram ..........................................................26

RS232C Schematic Circuit Diagram .................................................................................26

cc-Talk Schematic Circuit Diagram ....................................................................................27

TTL Schematic Circuit Diagram .........................................................................................27

Bezel LED Schematic Circuit Diagram...............................................................................28

7 OPERATIONAL FLOWCHARTS ............................................................................. 29

iVIZION2 Operational Flowchart; Stand-by and Initialization .............................................29

iVIZION2 Operational Flowchart; Validation ......................................................................30

8 TROUBLESHOOTING ............................................................................................. 31

Introduction ......................................................................................................................31

Troubleshooting Overview..............................................................................................31

Malfunction LED Error Codes .........................................................................................31

LED Indication Conditions ..............................................................................................31

LED Error and Reject Codes ...........................................................................................32

LED Error Codes; General .................................................................................................32

LED Error Codes; ICB........................................................................................................33

LED Error Codes; Banknote Jam.......................................................................................34

LED Reject Codes; Banknote ............................................................................................35

LED Reject Codes; Barcode Ticket....................................................................................36

9 UNIT DIMENSIONS AND MAINTENANCE SPACE REQUIREMENT .................... 38

SS Type with Standard Box ...............................................................................................38

SS Type with Large Box.....................................................................................................39

10 TECHNICAL CONTACT INFORMATION ................................................................ 40

Americas ............................................................................................................................40

JCM American ...............................................................................................................................40

Europe, Middle East, Africa & Russia ................................................................................40

JCM Europe GmbH .......................................................................................................................40

UK & Ireland.......................................................................................................................40

JCM Europe (UK Office) ................................................................................................................40

Asia and Oceania...............................................................................................................40

JCM American (Australia Office) ...................................................................................................40

JAPAN CASH MACHINE CO., LTD.(HQ)......................................................................................40

Table of Contents

Page

iii

iVIZION™2 Series Banknote Validator Foundation of Intelligent Validation

11 INDEX .......................................................................................................................41

THIS PAGE INTENTIONALLY LEFT BLANK

iVIZION™2 Series Banknote Validator

Foundation of Intelligent Validation

List of Figures Page

Figure 1 iVIZION2 Unit ..............................................................................................1

Figure 2 Unacceptable Banknotes ............................................................................5

Figure 3 iVIZION2 Component Names .....................................................................6

Figure 4 Grounding .................................................................................................11

Figure 5 External Harness Installation ....................................................................11

Figure 6 Side Installation.........................................................................................11

Figure 7 Rear Installation ........................................................................................12

Figure 8 Security Lock Installation ..........................................................................12

Figure 9 Lock Hole Cap Installation ........................................................................12

Figure 10 Unlock Rotation Direction..........................................................................12

Figure 11 Retrieving Banknote..................................................................................21

Figure 12 Clearing a Banknote Jam 1.......................................................................21

Figure 13 Clearing a Banknote Jam 2.......................................................................21

Figure 14 General Cleaning Image ...........................................................................22

Figure 15 iVIZION2 Sensor Locations.......................................................................23

Figure 16 USB Schematic Circuit Diagram ...............................................................25

Figure 17 Photo-Coupler Isolation Schematic Circuit Diagram .................................26

Figure 18 RS232C Schematic Circuit Diagram .........................................................26

Figure 19 cc-Talk Schematic Circuit Diagram ...........................................................27

Figure 20 TTL Schematic Circuit Diagram ................................................................27

Figure 21 Bezel LED Schematic Circuit Diagram......................................................28

Figure 22 iVIZION2 Operational Flowchart; Stand-by and Initialization ....................29

Figure 23 iVIZION2 Operational Flowchart; Validation .............................................30

Figure 24 SS Type with Standard Box Outside Dimension and Maintenance 

Space3 ........................................................................................................8

Figure 25 SS Type with Large Box Outside Dimension and Maintenance Space ....39

THIS PAGE INTENTIONALLY LEFT BLANK

vii

iVIZION™2 Series Banknote Validator

Foundation of Intelligent Validation

List of Tables Page

Table 1 Model Number Specifications .....................................................................2

Table 2 Type Number Specifications .......................................................................2

Table 3 Software Number Specifications .................................................................2

Table 4 iVIZION2 Component Names .....................................................................7

Table 5 iVIZION2 Technical Specifications..............................................................8

Table 6 iVIZION2 Environmental Specifications ......................................................9

Table 7 iVIZION2 Electrical Specification ..............................................................10

Table 8 iVIZION2 Structural Specification..............................................................10

Table 9 RFID Specifications...................................................................................10

Table 10 Denomination Settings (by DIP Switch) ....................................................13

Table 11 Interface Settings ......................................................................................13

Table 12 Primary LED Indications............................................................................13

Table 13 USB Connection Pin Assignments............................................................15

Table 14 Photo-Coupler Isolation Connection Pin Assignments..............................16

Table 15 RS232C Connection Pin Assignments......................................................17

Table 16 cc-Talk Connection Pin Assignments........................................................18

Table 17 TTL Connection Pin Assignments.............................................................19

Table 18 Bezel Connector Pin Assignments............................................................20

Table 19 iVIZION2 Sensor Descriptions and Cleaning Methods .............................24

Table 20 LED Indication Conditions.........................................................................31

Table 21 LED Error Codes; General ........................................................................32

Table 22 LED Error Codes; ICB...............................................................................33

Table 23 LED Error Codes; Banknote Jam..............................................................34

Table 24 LED Reject Codes; Banknote ...................................................................35

Table 25 LED Reject Codes; Barcode Ticket...........................................................36

viii

THIS PAGE INTENTIONALLY LEFT BLANK

iVIZION™2 Series Banknote Validator

Foundation of Intelligent Validation

Integration Guide

Revision A

1 GENERAL INFORMATION

Description

This section provides a general overview of the

iVIZION™2 Series Banknote Validator

(iVIZION2), pictured in Figure 1. This section is

designed to help the user navigate through this

guide with ease. It includes the following informa-

tion:

• iVIZION2 Unit (p. 1)

• Product Descriptions (p. 2)

• Precautions (p. 3)

• Primary Features (p. 5)

• Component Names (p. 6)

In order to make operating this device and 

navigating within this manual easier, the following

illustrations are used:

• Safety Instructions need to be observed in order to

protect the operators and the equipment; these are

identified with Bold text and the pictographs (Refer

to “Definitions for Warning, Caution and Note

Signs” on page 3).

• Special Notes affect the use of the iVIZION2 Unit;

these are identified with italic text and the following

pictograph:

• Steps require the operator to perform specific

actions; these are identified with sequential

numbers (1, 2, 3, etc.).

iVIZION2 Unit

Figure 1 iVIZION2 Unit

SS Type, Standard Box SS Type, Large Box

Section 1 iVIZION™2 Series Banknote Validator Foundation of Intelligent Validation General Information

Product Descriptions

Model Descriptions

Type Descriptions

Software Descriptions

Table 1 Model Number Specifications

No.

(1) Validation Sensor Type

2: CIS and UV Point Sensor

3: CIS (featured UV Sensor)

(2) CPU Board (Memory and more)

0: [DDR3] 4GBit/[FLASH] 128Mbit (Standard)

1: [DDR3] 4GBit/[FLASH] 256Mbit

(3) Validator

0: SS Type (Standard)

(4) Stacking Type

SS: Security Stacker Down (SS)

Table 2 Type Number Specifications

No.

(1) Cash Box Capacity*

5: 500 notes (New Banknote).Standard Box.

9: 900 notes (New Banknote). Large Box.

*. The number of stacked Notes depends on the Banknote’s condition.

(2)

Cash Box Type

0: ICB 256[Byte] (Standard) ICB Tag in Box

1: ICB 2K[Byte] (Standard) ICB Tag in Box

9: ICB Not Supported

(3)

Cash Box Handle

0: Standard (Green)

1: Red Handle

9: No Handle

(4) MGU Type (Motor Gear Unit)

00: Standard

(5) Bezel (Option)

0: No Bezel

1: With Bezel

(6) ICB (RFID Module)

0: Not Supported

1: Supported (Standard)

(7) SD Memory

0: No SD Memory

(8) Input/Output Signal Selection

P: Photo-Coupler Isolation (Standard)

R: RS232C

(9)

External Harness Type

Model: iVIZION - * * * - * *

NoƖ

(1)

(2)

(3)

(4)

Type:***-00-**0**

NoƖ

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

0: No Harness

1: Standard Harness (One side cut, No USB Cable)

2: Reserved

3: Harness with USB Cable and Connector (One side cut)

4: SS Harness (One side cut, No USB Cable)

5: SS Harness with USB Cable and Connector

6: Harness with USB Cable and Connector 2

Table 3 Software Number Specifications

No.

(A) Model Number*

*. Refer to “Model Descriptions” on page 2.

(B) Country Code (Denomination)†

†. The Country Code is indicated by three (3) Alphabetical Characters officially

assigned ISO 3166-1 alpha-3. For the multiple package, the Country Codes are

followed by an underscore “-” (i.e. USA_RUS_MEX).

(D) Interface Protocol Name‡

‡. For the multiple protocols, the Interface Protocol Names are followed by an under-

score “-” (i.e. ID-003_0E4).

(E) Software Version

Software: iVIZION-*** (***) - * * ID-*** V***-**

NoƖ

(A)

(B)

(C)

(D)

(E)

General Information iVIZION™2 Series Banknote Validator Foundation of Intelligent Validation Section 1

Precautions

Definitions for Warning, Caution and

Note Signs

Definitions for General Symbols

User Cautions

Careful measures were taken in the design of this

product to ensure its quality; however, the follow-

ing cautions pertain to all users and should be fol-

lowed for safe operation.

Installation

Mounting, Dismounting & Transportation

Indicates a hazardous sit-

uation that, if not avoided,

could result in death or

serious injury.

Indicates a hazardous sit-

uation that, if not avoided,

could result in minor or

moderate injury and/or

equipment damage.

Indicates information

considered important to

perform and function

optimal. Read carefully to

prevent malfunctions or

improper operation.

Signifies a general prohibition

(prohibited action)

Signifies a mandatory action

Signifies a general warning

WARNING

Careful measures were taken in the

design of this product to ensure its

quality; however, ensure that a fail-

safe design is used for the Host

Machine to assure safety.

WARNING

Do not use the Unit where it may be

exposed to airborne evaporated or

sporadic chemicals and/or oil.

This unit is not designed for outdoor

installation. Be sure the Host Machine

contains enough protection to avoid

wet or dusty conditions when install-

ing it in both open-air and indoor

spaces.

WARNING

CAUTION

NOTE

CAUTION

•Do not allow the Unit to endure a

range of temperature and humidity

beyond the environmental limits

specified (Refer to “Environmental

Specifications” on page 9).

•Do not use the Unit in environments

that may be subject to extreme tem-

perature changes.

•Be sure the Host Machine is

designed with careful consideration

for retrieving a Banknote and/or

cleaning a Banknote jam.

•Be sure to connect the Frame

Housing to the Frame Ground of

the Host Machine (Refer to

“Grounding” on page 11).

•Be careful not to use excessive out-

side pressure on the Unit, or sub-

ject it to excessive vibration during

transportation.

•Ensure that the Host Machine is

designed considering the risk of

electronic components that can

cause induced noise. The noise

generated by the components on

the Host Machine may affect and

degrade the Validation perfor-

mance.

•Ensure that the power cables com-

ply with the recommended specifi-

cations to avoid reset. (Refer to

“Recommended Wires” on

page 14). 

Cut off all the not-connected

unused cables to avoid static elec-

trical effects or short circuit possi-

bilities that could cause damage to

the Unit.

WARNING

Disconnect Main Plug

From Electrical Outlet

Be sure to remove electrical power

from the Unit and disconnect a USB

Cable before mounting or removing

the Unit including any optional or sub

assembly.

Do not carry the Unit by holding the

Cash Box. The Cash Box accidentally

becomes disassembled and drops

away.

Section 1 iVIZION™2 Series Banknote Validator Foundation of Intelligent Validation General Information

Placing Foreign Objects into the Unit

Operation

Preventive Maintenance

CAUTION

•While transporting, do not apply

too much pressure to the unit, or

subject it to excess vibration.

•Do not throw or apply excessive

force to the unit.

Disconnect Main Plug

From Electrical Outlet

Plugging or unplugging the communi-

cation connector while electrical

power is being applied to the Unit

may cause damage to the Unit.

Be sure to carry or transport the Unit

with the Cash Box installed. Exerting

external pressure on the equipment

without the Cash Box in place may

cause it to distort.

WARNING

•Do not insert anything except

Banknotes or Tickets into the Inser-

tion Slot. Inserting Receipts, Paper

Clips, Rubber Bands, Credit Cards,

etc. into the Unit may damage the

Banknote Transport path.

•Do not inject water or liquid agents

of any kind into the Unit, as this

may cause extreme damage to the

Unit.

CAUTION

•Do not drop or apply external pres-

sure on the Cash Box. The

Banknotes stacked up inside of the

Cash Box may collapse.

•Do not manually refill the Cash Box

with the Banknotes.

Pinch Point Hazard

Be careful to avoid any personal

injury to fingers when closing any

part such as Transport Unit or Valida-

tion Unit.

When closing or installing any part

with latches or locking tabs, ensure

that it clicks firmly into place.

WARNING

Do not redesign or disassemble the

Unit. Unauthorized use by inade-

quately trained personnel, or use out-

side the original manufacturer’s intent

for operation voids the warranty.

Disconnect Main Plug

From Electrical Outlet

Be sure to remove electrical power

from the Unit before beginning a

maintenance procedure. The equip-

ment can produce abnormal operat-

ing signals while in maintenance

mode that may cause personal injury.

If the Unit is exposed to water or other

liquids, use a clean, dry micro-fiber

cloth to wipe off and absorb excess

liquids immediately. Any remaining

liquids may affect and degrade the

Sensors and Validation performance.

CAUTION

•When reassembling a disassem-

bled unit, ensure that each part is

carefully placed in its proper loca-

tion.

•Be sure that each part is placed in

the proper location after mainte-

nance.

•To keep the Unit’s performance and

Banknote acceptance at optimal

rates, clean and maintain the Unit

regularly, especially in smoky 

environments such as where exces-

sive Automobile exhaust emission

or Cigarette Smoke may exist

(Refer to “Cleaning” on page 21).

General Information iVIZION™2 Series Banknote Validator Foundation of Intelligent Validation Section 1

Banknote Fitness Requirements

Primary Features

The iVIZION2 Series of Banknote Validator 

contains the following primary features:

• The iVIZION2 Unit is backwards compatible with

all previous iVIZION Series Unit. Upgrade of the

current iVIZION Unit to the new iVIZION2 Unit

can be accomplished by just replacing the

Validator.

• Fastest “Bill to Bill” processing speed; 1.5 seconds

or faster.

• Advanced Contact Image Sensor (CIS) provides

100% Banknote RBG-full-color-image capture.

• Longer Product lifetime; 5 years or 1 million

Banknotes.

• Direct firmware downloads from a PC via USB

connection.

• Strengthened compatibility with FUZION®

technology.

CAUTION

The following Banknote types may

not validate correctly, or worse, can

cause a Banknote jam and/or damage

to the Unit’s Transport Path, and

should be avoided:

• Torn

• Worn

• Taped

• Excessive folds or wrinkles

• Dirty

• Wet and/or Oiled

• Adhering foreign objects

• Excessive miscuts, misaligns and/or misprints

Figure 2 Unacceptable Banknotes

Damaged or Taped Banknotes

Wrinkled or Folded Banknotes

Curled, Folded or Partial Banknotes

Dirty Banknotes Wet or Oiled Banknotes

CAUTION: For 12V DC users, confirm

your power supply capacity before

upgrading from your iVIZION Unit to

the iVIZION2 Unit. The Current Limit

Mode is available in order to control

current consumption and, however,

this affects the processing speed (refer

to “Technical Specifications” on

page 8, “Electrical Specifications” on

page 10 and “Connector Pin

Assignments” on page 15 for details).

NOTE: The consumable items are not

included.

Section 1 iVIZION™2 Series Banknote Validator Foundation of Intelligent Validation General Information

Component Names

Figure 3 iVIZION2 Component Names

Bottom View

hij

MGU

(Motor Gear Unit)

Validator

Frame Unit

Cash Box

Bezel

Standard Box Large Box

(500 Banknotes) (900 Banknotes)

General Information iVIZION™2 Series Banknote Validator Foundation of Intelligent Validation Section 1

Table 4 iVIZION2 Component Names

aUpper Guide Access Lever (Front)

bUpper Guide Access Lever (Rear)

cValidator Release Lever

dCash Box Handle

eInterface Connector

fInterface Switch 1 (Interface Settings)

gInterface Switch 2 (Interface Settings)

hOptional Connector

iUSB Type-C Connector (Maintenance)

jBezel Connector

kPower ON LED

lStatus LED

mDIP Switch (Denomination Settings)

Section 2 iVIZION™2 Series Banknote Validator Foundation of Intelligent Validation Specifications

2 SPECIFICATIONS

This section provides specifications of the iVIZION™2 Series Banknote Validator (iVIZION2).

Technical Specifications

Table 5 iVIZION2 Technical Specifications

Banknote

Acceptance Rate*:

*. The Banknotes accepted at the second attempt are included. The Acceptance Rate Test was conducted with more than 100 Banknotes. Refer to the “Software Information

Sheet” for each Country’s Acceptance Rate parameters.In cases of software with security components, such as anti-counterfeit-bill, the acceptance rate may be lower.

98% or greater (The following Banknote types are excluded)

•Banknotes with excess or poor magnetism or unclear graphics

•Double (dual) Notes

•Dirty, scrubbed, wet, stained, torn, holed, worn-out, folded, or excessively creased

or wrinkled Banknotes

•Banknotes having folded corners or edges

•Banknotes having the wrong cut dimensions or printing displacement

•Returned Banknotes because of incorrect or failed insertion.

Types Accepted:

Long side

SS Type: 110mm - 170mm (4.33 - 6.69 in.) Short side: 60mm - 85mm (2.36 - 3.34

in.)

Insertion Direction†:

†. Refer to the “Software Information Sheet” for the supported denominations and the detailed Banknote insertion direction per currency.

Four-way

Barcode Ticket‡:

‡. Refer to the “iVIZION2 Barcode Specifications” for more details.

Acceptance Rate: 98% or greater (The following Ticket types are excluded)

•Barcodes having wrinkles or folds

Standard

Specification:

•Read code: Interleaved 2 of 5 (TiTo)

•Narrow Bar: 0.5mm - 0.6mm (0.019-0.023 in.)

•Wide Bar to Narrow Bar ratio = 3:1

•Characters: 18 Characters

•Print Position: Middle (Divides a Ticket equally from the left, right, top and bottom

of the Ticket’s center)

•Print Width: Wider than 10mm (0.39in.)

Insertion Direction: Four-way

2D Barcode QR Code, PDF417 and Data Matrix

•Minimum Module Size: 1mm x 1mm

“Bill-to-Bill”

Processing Speed**:

**. From Banknote insertion to capable of accepting a next Banknote. Excluded Host Communication time lag. The “from Banknote insertion to enable of next insertion” is a pro-

cessing speed per Banknote when 10 Banknotes are consecutively inserted. To change the mode, use the JCM Tool Suite app (“Utility” menu).

Normal Mode: 1.5 seconds or faster

Current Limit Mode (12V DC 3A): 1.9 seconds or faster

Escrow: 1 Note

Validation Method: Optical

Fraud Detection: Equipped (Anti-pullback System, Optical Detection)

Cash Box Type††:

††.A key and a lock are not included (A tang is provided). Refer to “Security Lock Installation” on page 12 for the installation. (1 Key Hole Cap is fitted in place to cover existing

holes when shipped).

Secure Cash Box

Intelligent Cash Box (ICB) (RFID available)

Cash Box Capacity‡‡:

‡‡.The number of Banknotes or Barcode Tickets stacked depends on its condition.

Standard Box: 500 Banknotes

Large Box: 900 Banknotes

Interface:

•USB (USB Specification Rev. 2.0 Compliance) (Full Speed/12Mbps)

•Photo-Coupler Isolation

•RS232C

•cc-Talk

•TTL

Diagnostic Indicators: Power LED, Status LED, Bezel LED (Optional)

Specifications iVIZION™2 Series Banknote Validator Foundation of Intelligent Validation Section 2

Environmental Specifications

Table 6 iVIZION2 Environmental Specifications

Operating Temperature: +5ºC to +50ºC (+41ºF to +122ºF)

Storage Temperature: -20ºC to +70ºC (-4ºF to +158ºF)

Relative Operating

Humidity: 15%RH to 85%RH (non-condensed)

Relative Storage Humidity: 15%RH to 85%RH (non-condensed)

Visible Light Sensitivity:

Avoid contact with direct sunlight

(Interior lighting must be incandescent with a Radiant Angle of 15 Degree

or more having an illumination index of 3000 Lux or less)

Installation:

Indoors Only.

Do Not expose to the elements (including the internal Unit assemblies).

No Cabinet Vibration.

100

0 5 10 15 20 25 30 35 40 45 50 55 60-25 -15 -10-20 65 70 75-5

100

0 5 10 15 20 25 30 35 40 45 50 55 60-25 -15 -10-20 65 70 75-5

35ºC/85%RH

50ºC/40%RH

50ºC/85%RH

70ºC/40%RH

15ºC/15%RH

5ºC/40%RH

Operating Hydrothermal Condition Table

Allowable

and Relative Humidity Range

Operating Temperature

Allowable

and Relative Humidity Range

Storage Temperature

Relative Humidity [%RH]Relative Humidity [%RH]

Storage Hydrothermal Condition Table

Temperature [°C]

Section 2 iVIZION™2 Series Banknote Validator Foundation of Intelligent Validation Specifications

Electrical Specifications

Structural Specifications

RFID Specifications

Table 7 iVIZION2 Electrical Specification

Supply Voltage: 12V DC (-5%) - 24V DC (+10%) (Greater than 80W recommended)

Current Consumption

Normal Mode*:

*. Measured on a new and factory default iVIZION2 Unit.

12V DC

•Standby = 0.6A

•Operation = 2.3A

•Peak = 4.9A

24V DC

•Standby = 0.3A

•Operation = 1.1A

•Peak = 3.2A

Current Limit Mode:

12V DC (Reference)

•Standby = 0.6A

•Operation = 2.1A

•Peak = 3.0A

Table 8 iVIZION2 Structural Specification

Weight: Approx. 4.2kg (9.3lbs)

Mounting: Horizontal

Maximum gradient limitation within 50 degrees

Outside Dimensions:

Refer to “SS Type with Standard Box” on page 38.

Refer to “SS Type with Large Box” on page 39.

Table 9 RFID Specifications

Frequency: 13.56MHz ±7kHz

This Unit is designed for use with a Limited Power Source!

NOTE: Refer to “Recommended Wires” on page 14 for your original harness.

Table of contents

Other JCM GLOBAL Bank Note Validator manuals

JCM GLOBAL

JCM GLOBAL UBA Pro Series User manual

JCM GLOBAL

JCM GLOBAL DBV Series Quick setup guide

JCM GLOBAL

JCM GLOBAL VEGA Series User manual

JCM GLOBAL

JCM GLOBAL TBV-100 FSH User manual

JCM GLOBAL

JCM GLOBAL WBA Series User manual

JCM GLOBAL

JCM GLOBAL TBV Series Quick setup guide

JCM GLOBAL

JCM GLOBAL RDM-100 Series Quick setup guide

JCM GLOBAL

JCM GLOBAL Taiko PUB-7 User manual

Popular Bank Note Validator manuals by other brands

Money Controls

Money Controls SR5 manual

Crane

Crane NRI G-13.mft Standard operating instructions

GBA

GBA HR1 Maintenance Guide

Rowe

Rowe BC-3500 Update instructions

Kolibri

Kolibri KCD-1000 Cleaning procedure

JCM GLOBAL iVIZION2 Series Quick setup guide

Popular Bank Note Validator manuals by other brands