Jetson Jetkart phantom User manual

1
JETKART PHANTOM
-MANUAL-

2
TABLE OF CONTENTS
A. Introduction 3
B. Included in the Box 4
C. Features and Specs 5
D. Assembly 5
E. Charging the Battery 7
F. Operating the Phantom 8
G. Care and Maintenance 10
H. Safety Warnings 12
I. Warranty 14
J. Product Registration 15

3
Congratulations on your new Jetson JetKart Phantom! The Phantom
is an innovative and fun Jetkart, ready to take on everyday use. Before
your rst ride, check whether the wheels are damaged, or parts are
loose. If there are any abnormalities, please contact Customer Support
at 1-[phone] or email us at [email protected].
This product manual can help you understand, use, and maintain your
Phantom. In order to avoid danger caused by collisions, falls, and
loss of control, please use caution and learn how to ride the Phantom
safely. Jetson and authorized dealers cannot be held liable for injury or
damage caused from riding the Phantom. Users ride at their own risk.
The rider is responsible for consequences caused by violating warnings
or improper operations.
If you want to return this product for any reason, be sure to rst call or
email us before taking it back to the store so we can assist you.
INTRODUCTION

4
INCLUDED IN THE BOX
1. Foot Rest
2. Foot Rest Tube
3. Frame Tube
4. Seat
5. Front Lights
6. Power Button
7. Knob
8. Front Wheel
1. Charging Port
2. Left Handlebar
3. Back Rest
14
6
8
1
5
2 4
5
2
3
3
4. Right Handlebar
5. Back Lights
7

5
FEATURES AND SPECS
MODEL: PHANTOM
WHEEL SIZE: 6.5”(REAR)
MAX SPEED: 9 MPH
MAX RANGE: 8 MILES
BATTERY TYPE: LITHIUM ION
BATTERY CAPACITY: 36V, 4.4Ah
MOTOR TYPE: HUB
CLIMBING ANGLE: 20°
MOTOR: 500w
CHARGER: 110-220V
CHARGE TIME: 2-3 HOURS
PRODUCT WEIGHT: 29 LBS
WEIGHT LIMIT: 220 LBS
RECOMMENDED AGE: 13+
ASSEMBLY
1. Slide the Frame Tube into the slot at the bottom of the Seat and
tighten the screws under the Seat using the provided Allen Key.
2. Slide the Foot Rest Tube into the Frame Tube and tighten the
Knob. Make sure the screws in the Foot Rest Tube are tight and
secure. Set the length to a comfortable distance, where your legs
are slightly bent.
Tighten
Screws
3. Insert the Back Rest into the slot at the back of the Seat. Tighten
two screws into the back of the Back Rest and two screws under
the Seat using the provided Allen Key.
Tighten
Screws
Tighten
Knob

6
Tighten
4 screws
4. Slide the Handlebars into the holes near the base of the Seat.
Make sure the Handlebar curves out away from the Seat. Tighten
the screws using the provided Allen Key.
Tighten
Screw
5. Remember to make sure all the parts are tight and secure
before you ride.

7
CHARGING THE BATTERY
Your Phantom comes with a built-in rechargeable lithium ion battery.
Always use the provided charger only. The charging port is located
on the back of the Phantom underneath the seat. Please remember
to cover the Charging Port when you are done charging the Phantom.
Before your rst ride you must fully charge the Phantom - charge for 4
hours for the rst 3 times you use it. For every ride after, charge your
Phantom until it is fully charged, and NOT LONGER. Do not leave any
chargers plugged in overnight, or leave it plugged in past the charge
time.
1. Plug one end of the power cord into a grounded AC outlet and the
other into the Phantom’s charging port. The red charging light on the
charger unit will turn on.
2. The red light will turn green once fully charged. Recharge the
Phantom after each use.
(Please note: Always plug the charger into the wall rst before the
device. If the wall outlet doesn’t have power and you plug the charger
into the device rst, it will light green, even if the battery is not full. So
always plug into the wall rst to make sure there is power.)
THE CHARGER OFFERS A CHARGING STATUS ON THE TOP OF THE
CHARGER:
CHARGING LIGHT RED: Battery is charging.
CHARGING LIGHT GREEN: Charging is complete.
Don’t use the Phantom if the battery emits strange odors, overheats,
or begins leaking. If the battery does leak, do not touch any leaking
materials, as the battery contains dangerous substances. Do not open
the battery and do not insert anything into the battery.
Only use the provided charger for the Phantom. Do not charge the
battery if it has over-discharged. It should be discarded for your safety.
Do not turn on the Phantom while it is charging.

8
TURNING ON AND OFF
To turn the Phantom on, rst locate the Power Button on the front of the
Phantom underneath the Seat. Lift the cover and press the Power Button
in. The right Front Light will turn on. To turn the Phantom off, ip the
Power Button off. The right Front Light will turn off. Please remember to
cover the Power Button after turning it on or off.
OPERATING THE PHANTOM
GETTING ON
1. Before taking your seat, make sure your the Phantom is charged.
Then place it on a leveled surface, facing up and turned off.
2. Carefully lower yourself into the seat. Then place your feet, rst one
then the other, on the footrests. That way your weight can balance out
the Phantom and keep you from falling backwards.
3. After you’ve followed all these steps, you can turn on the Phantom.
INFRARED SEAT SENSORS
As a safety feature, there are four infrared sensors located on the Seat.
The sensors are activated by someone sitting in the Seat while the
power is On. The Phantom will not move unless the Seat Sensors are
activated, to ensure it will not move on its own, and to allow you to sit
down and stand up safely.
Infrared
Seat
Sensors

9
HOW TO RIDE
1. Slowly push down on both Handlebars to move forward.
2. Push down on the Right Handlebar to turn left, and push down on the
Left Handlebar to turn right.
3. Apply more force pushing the Handlebars down to accelerate, and
pull the Handlebars up to slow down.
Remember, when rst using your Phantom be sure to start slow and put
very light pressure on the Handlebars. Applying more pressure on the
Handlebars will make the Phantom accelerate more rapidly.
Forward
Push Down
Brake/ Reverse
Pull Up
Turn Right Turn Left

10
RIDING RANGE
The average range of the Phantom is 8 miles. However, a lot of factors
will affect how far you can go per charge:
• Driving Surface: A smooth, at surface will increase driving
distance.
• Weight: More weight means less distance.
• Ambient Temperature: Please ride and store the Phantom
under recommended temperature, which will increase its
longevity and driving distance.
• Maintenance: Timely battery charging and maintenance will
increase driving distance.
• Speed and Driving Style: Maintaining a moderate speed will
increase distance. Frequent starting and stopping, acceleration,
and decelertion will reduce it.
CARE AND MAINTENANCE
SPEED LIMIT
The top speed of the Phantom is set to 9 mph.
WEIGHT LIMIT
The maximum load is 220 lbs. Going above the maximum weight limit
can cause injury or damage the Phantom.
CLEANING THE PHANTOM
To clean the Phantom, carefully wipe with a damp cloth, then dry with
a dry cloth. Do not use water to clean the Phantom, as the electrical
and electronic systems may get wet, resulting in personal injury or
malfunction of the Phantom.
BATTERY
• Keep the Phantom away from re and excessive heat.
• To avoid damage to the battery, never subject the Phantom to intense
physical shock, severe vibration, or impact.
• Protect the Phantom from water or moisture.
• Never disassemble the Phantom or its battery.
• If there are any issues with the battery, please contact Jetson
Customer Support at 1-[phone] or email us at
[e-mail].