John Lewis Medan double bed 803 51803 User manual

Medan double bed
Stock number: 803 51803
H110 W146 D206.6cm

Tools required
Time to assemble
40 Minutes
1
Thank you for purchasing the Medan double bed. Please read the instructions and warnings carefully before
use, to ensure safe and satisfactory operation of this product.
At John Lewis, we are committed to making great products possible.
From our in-house Design Team, to our Buyers, we work together to bring great design to life.
Our expert Product Technologists work collaboratively with our buyers and suppliers to assure the legality, safety
and quality of the product we sell.
We are all committed to designing and developing products to the highest industry standards.
We hope you are happy with your product and welcome any feedback or comments you may have.
The John Lewis Team
40 Minutes
People to assemble

Important safety information
Warnings
The product should only be used on firm, level ground.
Keepsmall parts out of reach of children.
Ensure the product is fully assembled as illustrated before use.
Do’s
Check the pack and make sure you have all the parts listed.
Check all screws or bolts are tightened and inspect regularly.
Make sure the legs remain in contact with the ground at all times.
Don’ts
Do not over tighten screws or bolts.
Do not stand on the product.
Do not use power tools to construct as overtightening and panel failure may occur.
2
01244 689949

Your bed
3
12 3
4 5
Ref Description Qty
1
2
Headboard
Footboard
1
1
4
Slats
3Side rails 2
5
Centre rail 1
28

Fixtures and fittings
4
Fixtures and fittings
supplied (not actual size)
Ref Description Dimensions Qty
Screw M4 x 15mm 10
Centre bracket 2
B
A
C
D
Side slat cap
Centre slat cap
28
14